• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.183-202
• /
• 2019

For design and performance assessment of a high-level radioactive waste (HLW) disposal system, it is necessary to understand the characteristics of coupled thermo-hydro-mechanical (THM) behavior. However, in previous studies for the Korean Reference HLW Disposal System (KRS), thermal analysis was performed to determine the spacing of disposal tunnels and interval of disposition holes without consideration of the coupled THM behavior. Therefore, in this study, TOUGH2-MP/FLAC3D is used to conduct THM modeling for performance assessment of the Korean Reference HLW Disposal System (KRS). The peak temperature remains below the temperature limit of $100^{\circ}C$ for the whole period. A rapid rise of temperature caused by decay heat occurs in the early years, and then temperature begins to decrease as decay heat from the waste decreases. The peak temperature at the bentonite buffer is around $96.2^{\circ}C$ after about 3 years, and peak temperature at the rockmass is $68.2^{\circ}C$ after about 17 years. Saturation of the bentonite block near the canister decreases in the early stage, because water evaporation occurs owing to temperature increase. Then, saturation of the bentonite buffer and backfill increases because of water intake from the rockmass, and bentonite buffer and backfill are fully saturated after about 266 years. The stress is calculated to investigate the effect of thermal stress and swelling pressure on the mechanical behavior of the rockmass. The calculated stress is compared to a spalling criterion and the Mohr-Coulumb criterion for investigation of potential failure. The stress at the rockmass remains below the spalling strength and Mohr-Coulumb criterion for the whole period. The methodology of using the TOUGH2-MP/FLAC3D simulator can be applied to predict the long-term behavior of the KRS under various conditions; these methods will be useful for the design and performance assessment of alternative concepts such as multi-layer and multi-canister concepts for geological spent fuel repositories.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.10-16
• /
• 2021

The consumption of fresh-cut agricultural materials is increasing due to increased public interest in health and the increase of single-person households. Most fresh-cut agricultural materials can be eaten without heating, thus easily exposing the consumer to food-borne pathogens. As a result, food-borne diseases are increasing worldwide. In the analysis of food-borne pathogens, it is important to detect the strains, but this is time consuming and laborious. Alternative detection methods that have been introduced, include polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE), which is performed without prior culturing. Samples of fresh-cut agricultural materials, such as vegetables, were analyzed by the culture-based method. In 129 samples, non-pathogenic Escherichia coli (3.9%), Bacillus cereus (31.8%), Clostridium perfringens (5.4%), Yersinia enterocolitica (0.8%), and enterohemorrhagic E. coli (0.8%) were detected. Eight samples contaminated with bacteria were randomly selected, further analyzed by PCR-DGGE, and compared with the culture-based method. Two cases detected non-pathogenic E. coli by PCR-DGGE only, despite a lack of detection by the culture method. It was supposed there was possibility of sample loss during its 10-fold dilution for appropriate cultivation. In the detection of high-risk food-borne pathogens, it was found that the detection limit was lower in PCR-DGGE than in the culture-based method (10 CFU/g). This suggests that PCR-DGGE can be alternatively used to detect strains. On the other hand, low-risk food-borne pathogens seem to have higher detection limits in PCR-DGGE. Consequentially, this study contributes to the improvement of food-borne pathogen detection and the prevention of its related-diseases in fresh-cut agricultural materials.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.136-149
• /
• 2020

It is generally believed that Douglas Fir timber imported from North America is used in repair work for Korean wooden heritage sites due to an insufficient supply of extra-large sized Korean pine timber. Based on this understanding in the cultural heritage repair field, Cultural Heritage Repair Business Entities ("CHRBE") prefer North American Douglas Fir timber which is more easily acquired on the market than large Korean pine timber. However, if CHRBE use large quantities of foreign-origin wood in the heritage repair field, this presents the threat of negative domestic impacts on cultural heritage such as breaching the preservation principal and ultimately weakening material authenticity. Therefore, this study aims to investigate the current supply status of large Korean pine timber through examination of existing research, interviews with experts engaged in CHRBE, and timber mills. With this information, the authors seek to identify whether the market supply of large Korean pine timber is indeed insufficient or not. In addition to this, this paper identifies the reasons why large Korean pine timber is not widely used if such timber supply is actually sufficient. In order to propose suggestions regarding the issues above, the authors study the distribution channel for large Korean pine timber and the price spectrum of this timber through examination of price information from the public agencies under the Korea Forest Service, research papers from the Cultural Heritage Administration, and estimation documents from timber mills. This paper also identifies two main opinions about why Korean timber has not been commonly used in the Korean heritage repair field. The first opinion is that the supply of large Korean pine timber really is insufficient in Korea. However, the second opinion is that it is hardly used due to inappropriateness of the government's procurement and estimation system, despite the fact that the supply of the timbers on the market is actually sufficient. Through the aforementioned research, this paper comes to the conclusion that the second opinion has strong grounds in many aspects. In terms of suggestions, alternative routes are proposed to stimulate the use of large Korean pine timber via supply by the 'Korea Foundation for Traditional Architecture and Technology' and surveys of the price spectrum of the timber, etc.

• Journal of Communication Design
• /
• v.55
• /
• pp.240-249
• /
• 2016

This study focused on cases about user experience using digital media as a marketing. The recent convergence of various types of media is resulting in new types of content. In a situation where approaching consumers through digital and virtual means is no longer an alternative or an option but a necessity, customers must be influenced and stimulated using various types of digital media. Because modern consumers prefer to participate actively rather than to be passively exposed to information, there is a need to maximize and optimize the consumer's experience using digital media. In this research, consumer experiences that utilized digital media were examined, and these case studies were analyzed from an experiential marketing perspective. How the 5 different types of Experiential Marketing proposed by Bernd Schmitt and Digital medias were combined in the digital marketing campaigns was examined. The case studies analyzed in this research were chosen out of widely popular digital marketing campaigns ran by beauty brands that used various experimental marketing types, such as 'Make-up Genius' of L'Or?al, 'Google Glass Tutorials' of Yves Saint Laurent and 'Digital Runway Bar' of The Burberry Beauty Box. This study classified that case samples into paid media, earned media and owned media based on sense, feel, think, act and relate that are the strategic experiential modules of Bernd Schmitt. This study could be confirmed various customer experience as a sense, feel, think, act and relate through that cases using digital media technology and marketing element of digital media. Through the process of examining which digital media types each marketing campaign utilized and how these types of digital marketing were combined, this research is significant in that it helps for the understanding of the current state of digital marketing and in that it can serve as the foundation for future research of efficient digital marketing.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.6
• /
• pp.135-154
• /
• 2020

This paper analyzes the 5,521 samples of the small and medium-sized businesses(SMBs) obtained from the Korea Credit Guarantee Fund. From January 2014 to September 2019, 85% of the SMBs have 5 or fewer full-time employees. The proportion of SMBs is overwhelmed by the elderly men, and most founders are the CEO. Also, about 87% of the workplace types are rented, while 64% of the CEO's residence types are owner-occupation. 47% of the financial grade score is less than 10 points out of 100 and 80% of SMBs have less than 200 million won of the loan guarantee. In particular, the total guarantee loan amount or the days of net guarantee have significantly positive relations with the working period of the CEO in the same industry, the number of employees, the operation period of SMBs, and the corporate business type. In the case of the financial grading score which has the highest weight in overall credit rating gets higher with the higher number of employees, the longer the operation period, and the corporate business type. However, the quantified non-financial grading score has no significant relationship with other explanatory variables, except for the corporate business type. This implies that a non-financial grade score is measured by other determinants that are not observed by the Korea credit guarantee fund. The pure non-financial grade score has positive relations with the working period of the CEO. Overall, this paper would help Korean SMBs upgrade their credit ratings and expand the money supply when there is no standardized credit rating model or no publicly available evaluation criteria for SMBs. We expect this paper provides important insights for further research and policy-makers for SMBs. In particular, to address the financial needs of thin-filers such as SMBs, technology-based financial services (TechFin) would use alternative data to evaluate the financial capabilities of thin-filers and to develop new financial services.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.177-196
• /
• 2021

In the era of the 4th industrial revolution, high technology is causing many changes in modern society and economy. Among them, changes in industries and jobs require new competencies of future human resources. As an educational alternative to these changes, maker education and design thinking methods are spreading around the world, and it is necessary to actively apply such education in university curriculum. Therefore, this study examines the effects of the maker education using the design thinking method on the learners' competencies required as future human resources and, relationship between the development of university students' entrepreneurial competencies and learners' competencies. And the purpose of this study is to contribute to the vitalization of entrepreneurship education for university students by suggesting an educational model. For this purpose, this study investigated the prior research on maker education/environment and design thinking methods to examine concepts and characteristics, and analyzed the influences between maker education/environment and design thinking methods and the development of learners' personal, social and technological capabilities. In addition, this study analyzed the relationship between learners' developed capabilities and university students' entrepreneurial capabilities, and based on the results, suggested directions and conceptual models for education that combine maker education/environment and design thinking methods. In conclusion, maker education/environment and design thinking methods in university education have a positive effect on the cognitive, social, and technological development of learners, and this has a significant relationship with the factors of personal, social, and technological dimensions of university students' entrepreneurial competency. It is analyzed that it has a positive effect on the promotion of entrepreneurship activities of university students. Therefore, it is judged that university's interest and support should be given to the vitalization of maker education using the design thinking method for university student entrepreneurship education and future human resources nurturing.

• Korean journal of applied entomology
• /
• v.61 no.4
• /
• pp.605-614
• /
• 2022

Two major problems currently threaten human survival on Earth: climate change and the rapid aging of the population in developed countries. Climate change is a result of the increase in greenhouse gas (GHG) concentrations in the atmosphere due to the increase in the use of fossil fuels owing to economic and transportation development. The rapid increase in the age of the population is a result of the rise in life expectancy due to the development of biomedical science and technology and the improvement of personal hygiene in developed countries. To avoid irreversible global climate change, it is necessary to quickly transition from the current fossil fuel-based economy to a zero-carbon renewable energy-based economy that does not emit GHGs. To achieve this goal, the dairy and livestock industry, which generates the most GHGs in the agricultural sector, must transition to using low-carbon emission production methods while simultaneously increasing consumers' preference for low-carbon diets. Although 77% of currently available arable land globally is used to produce livestock feed, only 37% and 18% of the proteins and calories that humans consume come from dairy and livestock farming and industry. Therefore, using edible insects as a protein source represents a good alternative, as it generates less GHG and reduces water consumption and breeding space while ensuring a higher feed conversion rate than that of livestock. Additionally, utilizing the functionality of medicinal insects, such as silkworms, which have been proven to have certain health enhancement effects, it is possible to develop functional foods that can prevent or delay the onset of currently incurable degenerative diseases that occur more frequently in the elderly. Insects are among the first animals to have appeared on Earth, and regardless of whether humans survive, they will continue to adapt, evolve, and thrive. Therefore, the use of various edible and medicinal insects, including silkworms, in industry will provide an important foundation for human survival and prosperity on Earth in the near future by resolving the current two major problems.

• Journal of Food Hygiene and Safety
• /
• v.38 no.2
• /
• pp.55-62
• /
• 2023

This study aimed to investigate the effect of a coating agent on pork storage. Pork was coated with a coating agent containing sodium carboxymethyl cellulose (CMC) and mandarin peel powder (M). The treatments were divided into control, a 0.1% CMC treatment, and a 0.1% CMC +5% M treatment, and pH, color, 2-thiobarbituric acid reactive substances (TBARS), volatile basic nitrogen (VBN), and the number of viable cell counts were measured. In the case of redness (a), it was found that the reduction over the storage period was less in the 0.1% CMC + 5% M treatment than in the control and the 1% CMC treatment. When stored at 4℃ and 25℃, TBARS of pork tended to increase during the storage period, followed by control, 0.1% CMC treatment, and 0.1% CMC + 5% M treatment, indicating that lipid oxidation was most suppressed in pork coated with mandarin peel powder. As a result of measuring the VBN of pork stored at 4℃ and 25℃, the 0.1% CMC + 5% M treatment showed lower values than the control and 0.1% CMC treatment. When the film-coated pork was stored at 4℃, the number of viable cell counts in the 0.1% CMC +5% M treatment area was 7.13±0.96 log CFU/g on the 12th day of storage, delaying the growth of viable cell counts for approximately 3 d more than other treatments. Therefore, coating pork with a film containing CMC and mandarin peel powder has been confirmed to delay the increase in the number of viable cell counts while reducing the quality change during pork storage, which is an effective alternative to improving the storage of fresh food as an edible film.

• Journal of Intelligence and Information Systems
• /
• v.29 no.3
• /
• pp.361-381
• /
• 2023

Research on corporate bankruptcy prediction has been focused on financial information. Since the company's financial information is updated quarterly, there is a problem that timeliness is insufficient in predicting the possibility of a company's business closure in real time. Evaluated companies that want to improve this need a method of judging the soundness of a company that uses information other than financial information to judge the soundness of a target company. To this end, as information technology has made it easier to collect non-financial information about companies, research has been conducted to apply additional variables and various methodologies other than financial information to predict corporate bankruptcy. It has become an important research task to determine whether it has an effect. In this study, we examined the impact of electronic payment-related information, which constitutes non-financial information, when predicting the closure of business operators using electronic payment service and examined the difference in closure prediction accuracy according to the combination of financial and non-financial information. Specifically, three research models consisting of a financial information model, a non-financial information model, and a combined model were designed, and the closure prediction accuracy was confirmed with six algorithms including the Multi Layer Perceptron (MLP) algorithm. The model combining financial and non-financial information showed the highest prediction accuracy, followed by the non-financial information model and the financial information model in order. As for the prediction accuracy of business closure by algorithm, XGBoost showed the highest prediction accuracy among the six algorithms. As a result of examining the relative importance of a total of 87 variables used to predict business closure, it was confirmed that more than 70% of the top 20 variables that had a significant impact on the prediction of business closure were non-financial information. Through this, it was confirmed that electronic payment-related information of non-financial information is an important variable in predicting business closure, and the possibility of using non-financial information as an alternative to financial information was also examined. Based on this study, the importance of collecting and utilizing non-financial information as information that can predict business closure is recognized, and a plan to utilize it for corporate decision-making is also proposed.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.43-58
• /
• 2008

This research was conducted to determine the alternative tool of chemical spray for rice cultivation using the unmanned helicopter(Yamaha, R-Max Type 2G-remote controlled system) at farmer's field in Korea. The unmanned helicopter tested was introduced form Japan. In Korea the application of chemicals by machine sprayer for pest management in rice cultivation has been ordinarily used at the farmer's level. However, it involved a relatively high cost and laborious for the small scale of cultivation per farm household. Farm population has been highly decreased to 7.5% in 2002 and the population is expected to rapidly reduce by 3.5% in 2012. In Japan, pest control depending on unmanned helicopter has been increased by leaps and bounds. This was due in part to the materialization of the low-cost production technology under agricultural policy and demand environmentally friendly farm products. The practicability of the unmanned helicopter in terms of super efficiency and effectiveness has been proven, and the farmers have understood that the unmanned helicopter is indispensable in the future farming system that they visualized. Also, the unmanned helicopter has been applied to rice, wheat, soybean, vegetables, fruit trees, pine trees for spraying chemicals and/or fertilizers in Japan Effect of disease control by unmanned helicopter was partially approved against rice blast and sheath blight. However, the result was not satisfactory due to the weather conditions and cultural practices. The spray density was also determined in this experiment at 0, 15, 30, and 60cm height from the paddy soil surface and there was 968 spots at 0cm, 1,560 spots at 15cm, 1,923 spots at 30cm, and 2,999 spots at 60cm height. However, no significant difference was found among the treatments. At the same time, there was no phytotoxicity observed under the chemical stray using this unmanned helicopter, nor the rice plant itself was damaged by the wind during the operation.