• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.110-123
• /
• 2008

The use of CCA as a wood preservative was recently inhibited due to its environmental pollution and human harmfulness. Instead of CCA, copper azole (CuAz) and alkaline copper quaternary (ACQ) have been used as alternative wood preservatives, but the price of the preservatives is much more expensive than that of CCA. As a substitute for high-priced CuAz and ACQ, environmentally friendly wood preservatives were formulated with okara, which is an organic waste from the production of tofu. Prior to formulating the preservatives, okara was hydrolyzed by three levels of sulfuric acid concentration (1, 2.5 and 5%) to easily penetrate the effective components of the preservatives into wood blocks. Final preservative solutions were formulated with the hydrolyzed okara and metal salts, such as copper sulfate, copper chloride and borax. The preservatives were treated into wood blocks by vacuum-pressure method to measure the treatability of the preservatives, and the treated wood blocks were placed in hot water for three days to measure the leachability of the preservatives. The effective components of the preservatives might be successfully penetrated into wood blocks through the uses of hydrolyzed okara and ammonia water. However, the leached amount of effective components was increased as the concentration of acid used for the hydrolysis of okara increased. The treatability and leachability of the preservatives were not affected by hydrolysis temperature but negatively affected by the addition of borax. Based on the results above, the optimal conditions for formulating okara-based wood preservatives cost-effectively and environmentally might be 1% acid hydrolysis of okara and the use of $CuCl_2$ as a metal salt. In addition, the treatability and leachability of okara-based wood preservatives were superior or no differences comparing with those of CuAz. Therefore, it is concluded that okara-based wood preservatives might have a potential to be used as an environmentally friendly wood preservative.

• Journal of Animal Science and Technology
• /
• v.48 no.1
• /
• pp.9-14
• /
• 2006

Milk yield and its quality traits determine the dairy enterprise profitability and sustainability. Milk quality traits including somatic cell counts (SCC) is an upcoming economic challenge for dairy farming community in Korea. This study estimated the effect of parity, stage of lactation (early, mid and late lactation) on SCC, stress (blood cortisol) and immunity (blood IgG, lymphocyte and neutrophil) traits, their heritabilities and genetic correlations between them. SCS and blood neutrophil count were significantly affected by both parity and stage of lactation, however; IgG was affected by only stage of lactation, and blood cortisol and lymphocyte were not affected by both factors. The SCS has shown increasing trend with the parity, however; the difference between first and second parity, second and third parity were not significant. The SCS in early (≤90 days) and late lactation (181≤days) were higher than that of mid lactation (91～180 days). Cortisol concentration in blood was lowest in fourth parity, however; the differences among the first three parties were not significant. The IgG was higher in fourth parity compare with first parity however; all other comparisons were noted non-significant. The IgG concentration was significantly higher in early lactation than those of mid and late lactation. The blood lymphocytes were decreased with increasing parity however the differences beyond second parity were not significant. The neutrophils were increased with the increasing lactation stage however; the difference between early and mid lactation was not significant. Although heritability of SCS was still lower, but it was meaningful value (0.09) and may be considered to improve milk quality. The genetic correlations between SCS and cortisol (-0.96), and lymphocyte (-0.76) were highly negative. Heritability of cortisol was low, however genetic correlations between cortisol and lymphocyte (0.79) was highly positive. IgG with medium heritability was correlated negatively with lymphocyte (-0.88) and neutrophil (-0.98). Lymphocyte was lowly heritable and highly correlated with neutrophil concentration (0.87).This study suggested that cortisol, IgG, lymphocyte and neutrophil being positively genetically correlation with somatic cell score could be used as alternative traits to enhance milk quality in Holstein cattle. Further studies are warranted to estimate genetic relationships between immunological and production traits to increase the genetic merit of Holstein cows for milk yield, to improve animal health and economic viability under intensive management system.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.164-176
• /
• 2012

In the present study, rapeseed flour (RSF), which is a by-product from the production of edible oil and biodiesel extracted from rapeseed, was used to develop alternative adhesives for the production of plywood panels. To examine the effects of the enzyme on the adhesive properties and formaldehyde emission of the RSF-based adhesive resins, three enzymes, such as cellulase (CEL), pectinase (PEC) and protease (ALC), were used either separately or together. As a crosslinking agent, PF prepolymers, which were prepared with 1.5, 1.8 and 2.1 mole formaldehyde and 1 mol phenol (1.8-, 2.1- and 2.4-PF), were added into the RSF hydrolyzates. The adhesive resins formulated with CEL- or CEL-PEC-RSF hydrolyzates and 1.8-F/P PF prepolymers exhibited excellent adhesive strengths and formaldehyde emission. The tensile shear strength and formaldehyde emission of the plywood panels bonded with the formulate resins were satisfied with the minimum requirement of the KS standard for ordinary plywood panels (0.6 N/$mm^2$). In addition, formaldehyde emissions of the plywood panels approached to that of E0 specified in the KS standard (0.5 mg/${\ell}$), and even had much better than those of commercial UF glue mixes. Overall, the use of RSF-based adhesive resins for the production of plywood panels might provide durable adhesive properties and an environmentally friendly substitute for petroleum-based adhesive resins. However, further researches - the increase of solid content of RSF-based adhesives for reducing press time and the microscopic observation of plywood specimen for identifying the relationship between tensile shear strength and the penetration of adhesives into wood structure - are required to commercialize the RSF-based adhesives.

• Journal of the Korean Society of Radiology
• /
• v.10 no.6
• /
• pp.403-409
• /
• 2016

MRI scan is a useful method in the diagnosis of musculoskeletal excellent contrast of the organization. Depending on the patient's musculoskeletal examinations state the type of aids provided the aid is used there is also challenging as well as the costs do not vary. This study was produced by the use of 3D printing technology, an MRI aids. Aids in the production process, then through 3D modeling and then convert stl files using (3D MAX.2014, Fusion360) slicing programs (Cubicreater 2.1ver., Cura 15.4ver) converted to G-code printed on the FDM scheme (Cubicon Style, output was MICRO MAKE). Output is, but in the FDM to evaluate the SNR on the MRI images were compared to the test is the case before use, and then to produce a Water Phantom case of a PLA, ABS, a TPU thickness 3mm, using aids before, It was evaluated in a clinical image after qualitatively. Obtaining an image of SNR Warter Phantom appeared to have been evaluated as T1 NON $123.778{\pm}28.492$, PLA $123.522{\pm}28.373$, ABS $124.461{\pm}25.716$, TPU $124.843{\pm}27.272$. T2 NON $127.421{\pm}26.949$, was rated as PLA $124.501{\pm}27.768$, ABS $128.663{\pm}26.549$, TPU $130.171{\pm}25.998$. The results did not show statistically significant differences. The use of assistive devices before and after images Clinical evaluation method palliative $3.20{\pm}0.88$, $3.95{\pm}0.76$ after using the aids used to aid improved the quality of the image. Production of the auxiliary mechanism using a future 3D printing is expected are thought to be used clinically, it can be an aid making safe and comfortable than the inspection of the patient is an alternative to improve the problems of the aids used in the conventional do.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.147-158
• /
• 2008

In this study, fermentation characteristics of waste agricultural and forest biomass for production of heat energy were focused to be used in agricultural farm households. The purpose of this study was focused on seeking practical utilization of agricultural and forest biomass wastes in agricultural farm households in the form of thermal energy by means of simple fermentation process. Fermentation process was performed in terms of different raw-materials and their mixture with different ratios. Urea, lime, and bioaids were added as fermenting aids. Moisture contents of fermenting substrates were adjusted to 55~65%. In order to optimize the fermentation process various factors, such as raw-materials, moisture contents, amount of fermenting aids, and practical measurement of hot-water temperature during fermentation were carefully investigated. The optimum condition of fermenting process were obtained from hardwood only and hardwood: softwood (50 : 50) beds. In case of hardwood only the highest temperature was recorded between 60 to $90^{\circ}C$ the lowest temperature was determined to more or less $40^{\circ}C$ and the average temperature was ranged to $50{\sim}60^{\circ}C$ and this temperature ranges were maintained up to 20~30 days. The optimum amount of additives were estimated to ca. 15 kg of urea, 20 kg of bioaids, and 10 kg of lime for 1 ton of substrate. To reach the highest temperature the optimum moisture content of fermenting substrate was proved to 55% among three moisture content treatments of 45%, 55% and 65%. The temperature of hot-water tank installed in fermenting bed of hardwood : grass (50 : 50) showed very different patterns according to measuring positions. In general, temperatures in the mid- and upper-parts of substrate piling were relative higher than lower and surface parts during 45-day fermentation process. The maximum temperature of fermenting stage was determined to $65^{\circ}C$, minimum temperature, more or less $40^{\circ}C$, and average temperature was $60^{\circ}C$. The water temperature of tank exit was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. It could be concluded that fermentation process of waste agricultural and forest biomass produces a considerable amounts of heat, averaging about $50{\sim}60^{\circ}C$ for maximum 3 months by using the heat exchanger (HX-helical type).

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.355-360
• /
• 2010

Vibrio parahaemolyticus (V. parahaemolyticus), which is commonly found in raw seafood, causes gastroenteritis in humans. Rapid and effective methods have been developed as culture methods require up to 5-7 days. In this study, real-time PCR was compared with the standard culture method for detecting V. parahaemolyticus in seafood and radish sprout samples. Five hundred grams of the samples were artificially contaminated with V. parahaemolyticus then divided into 20 samples. The samples were incubated in alkaline peptone water and then streaked onto thiosulfate-citrate-bile saltssucrose agar. Biochemical tests for suspicious colonies were performed using the API 20NE strip. In parallel, real-time PCR was performed targeting the toxR gene using the enrichment broth. The real-time PCR was sensitive in discriminating V. parahaemolyticus from other foodborne pathogens. The detection limit of the real-time PCR was $10^3\;CFU/mL$ in phosphate-buffered saline. Although the real-time PCR detected more positive samples (76 out of 180, 42%) than the culture method (66 out of 180, 37%), there was no significant statistical difference (p>0.05) between the two methods. In conclusion, real-time PCR assays could be an alternative to the standard culture method for detecting V. parahaemolyticus in seafood and radish sprouts, which has many advantages in terms of detection time, labor, and sensitivity.

• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.427-436
• /
• 2004

The current study was conducted to determine the effect of suspension method on satisfaction level of Korean consumers and objective meat quality traits in Hanwoo longissimus dorsi(LD), triceps brachii(TB) and semimembranosus(SM) muscles. Eighteen Hanwoo steers were slaughtered and alternative sides were hung either by pelvic bone(TS) or Achilles tendon(Al). Sensory characteristics, WB-shear force, sarcomere length, water-holding capacity, saroomere length and cooking loss were determined after a 7-d chiller ageing. Higher carcass quality grade received significantly(p < 0.05) greater eating quality for LD, but the grade did not affect eating quality for both TB and SM. TS did not influence objective and subjective meat quality for TB, but that significantly(P < 0.05) improved eating quality for LD and SM. The most noticeable result was that when SM was tenderstretehed, eating quality was equivalent to that of nonna1ly hung LD. In relationship between objective and subjective meat quality assessments, eating qualty for LD had a significant(P < 0.05) relationship with intramuscular fat content, while that for SM was greatly(P < 0.05) related to saroomere length. The current study indicated that pelvic hanging was an effective way to improve eating quality both LD and SM, and carcass quality grades did not greatly reflect eating quality of SM and TB. The data also implied that instnunental measurements poorly estimated the satisfaction level of Korean conswners.

• Journal of Animal Science and Technology
• /
• v.51 no.1
• /
• pp.25-32
• /
• 2009

This study was conducted to determine the effects of probiotics supplementation on growth performance, nutrient digestibility, occurrence of diarrhea and immune response in weaning pigs. Treatments were 1) NC (basal diet), 2) PC (basal diet + 0.12% avilamycin) and 3) A (basal diet + 0.2% Aspergillus oryzae), 4) B (basal diet + 0.2% Lactobacillus casei), 5) C (basal diet + 0.2% Bacillus subtilis), 6) D (basal diet + 0.2% Lactobacillus crispatus). A total of 120 pigs ($7.16\pm0.01$ kg average body weight, weaned at $23\pm3$days of age) were assigned to 6 treatments, 5 replicates and 4 pigs per pen in a randomized complete block (RCB) design. During the whole experimental period, body weight (P<0.01), average daily gain (ADG; P<0.01), and average daily feed intake (ADFI; P<0.05) of treatment PC were higher than other treatments. However, the probiotics treatments tended to increase ADG and G:F ratio compared to treatment NC. The G:F ratio in treatment A (Aspergillus oryzae) was similar to treatment PC during the whole experimental period (P<0.05). The supplementation of probiotics in the diet of weaning pig did not change nutrient digestibility (dry matter, crude protein, crude fat and ash) and nitrogen retention of weaning pigs. In blood urea nitrogen (BUN) concentration, treatment B had lower value than other treatments at 2 and 4 weeks (P<0.05). Treatments PC and C tended to decrease diarrhea score than other treatments (P=0.18). At 3h after lipopolysaccharide (LPS) injection, treatments NC and PC had higher count of $CD^{4+}$ T-cells than probiotics treatments, and treatment C showed the lowest value (P<0.01). There were no differences on count of $CD^{8+}$ T-cells and $CD^{4+}:CD^{8+}$ ratio among all treatments (P>0.10). These results suggest that the dietary probiotics are likely able to improve the growth performance, occurrence of diarrhea and immune response although they do not have similar effects like antibiotics in weaning pigs.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.4
• /
• pp.282-293
• /
• 2008

In order to develop the substitutive materials for natural baits of swimming crab pots, the attracting effects of swimming crab such as the preference of baits which were made of the by-products of marine and stock raising through the water tank experiments and fishing experiments. On the investigation of mean entrapped catch number to the pot by the baits after putting the 4 kinds of baits, mackerel(M), mackerel with grinded mackerel s internals($MM_I$), mackerel with tuna s internals$MM_I$) and makerel with grinded krill(MK) each in one pot by turns, $MM_I$ and MK were entrapped mean 3.9(13.0%) and they were a little more comparing to M, and $MT_I$ is least with mean 2.1(7.0%)(F=12.913, P < 0.05). Otherwise, on the preference investigation of swimming crabs by the baits after putting the 4 kinds of baits in the 4 pots each, M was entrapped mean 3.0(10%), but $MM_I$, $MT_I$ and MK were mean 1.2(4.0%), 1.0(3.3%) and 1.5(5.0%) each and they were only 30-50% of M(F=13.398, P < 0.05). On the preference investigation of swimming crabs by the 5 kinds of baits, mackerel(M), and krill(K), manila clam($M_C$), pig s fat($P_F$) and chicken s head($C_H$) which were used in substitutive baits, M was entrapped mean 3.2(10.7%), but K was about 50% of catch of M with mean 1.6(5.3%), and $M_C$, $P_F$ and $C_H$ were very few with mean 0.1-0.2(0.3-0.7%)(F=89.186, P < 0.05). On the preference investigation of swimming crabs by the pots which were put each the 3 kinds of baits, original krill(K), grinded krill with gluten and soybean oil cake($K_GGS$) and grinded krill with gluten, soybean oil cake and glycine($K_GGSG_L$) in the blue fluorescent hexahedral plastic bait cages(BF), and which were put the mackerel(M) in the non-fluorescent hexahedral red plastic bait cage($RF_N$), it was entrapped mean 3.0(10.0%) in the pot which was put the mackerel in the $RF_N$, and the same level in the pots which were put the K and $K_GGSG_L$ in the BF, but it was mean 2.0(6.7%) in the pots which was put the $K_GGS$ in BF and it was decreased by 30% of catch comparing to $RF_N$(F=3.750, P < 0.05). On the preference investigation of swimming crab by the pots which was put grinded tuna with gluten, soybean oil cake and glycine($T_IGSG_L$) in the blue fluorescent hexahedral plastic bait cage(BF), and which was put mackerel(M) in the nonfluorescent hexahedral red plastic bait cage($RF_N$), it was entrapped mean 3.3(11.0%) in the pot which was put mackerel in $RF_N$, and mean 2.7(9.0%) in the pot which was put $T_IGSG_L$ in BF and it was about 15% less comparing to use bait M(t=1.387, P < 0.05). As a results of fishing experiments, a plan for enhancing catching efficiency of $T_IGSG_L$ will be required because catching efficiency of $T_IGSG_L$, alternative bait, was half of fish catching efficiency of natural bait using mackerel. Fishing experiments were conducted 3 times using reinforced substitutive artificial bait that is reinforced attractive effect of $T_IGSG_L$ and composed of tuna intestine, grinded mackerel, gluten, soybean cake, glycine and alanine($T_IM_GGSG_LA$). Catching efficiency of $T_IM_GGSG_LA$ was about 80% of that of natural bait made of mackerel.

• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.438-442
• /
• 2005

Granule swelling is essential phenomenon of starch gelatinization in excess water, and characteristic of heated starch dispersion depends largely on size and distribution of swelled starch granule. Although swelling characteristic of starch granules depends on type of starch, heating rate, and moisture content, influence of heating rate on swelling phenomenon of starch granule has not been fully discussed, because constant heating rate of starch dispersion cannot be obtained by conventional heating method. Ohmic heating, electric-resistant heat generation method, applies alternative current to food materials, through which heating rate can be easily controlled precisely and conveniently at wide range of constant heating rates. Starch dispersion heated at low heating rates below $7.5^{\circ}C/min$ showed Newtonian fluid behavior, whereas showed pseudoplastic behavior at heating rates above $16.4^{\circ}C/min$. Apparent viscosity of starch dispersion increased linearly with increasing heating rate, and yield stress was dramatically increased at heating rates above $16.4^{\circ}C/min$. Average diameter of corn starch granules during ohmic heating was dramatically increased from $30.97\;to\;37.88\;{\mu}m$ by increasing heating rate from $0.6\;to\;16.4^{\circ}C/min$ (raw corn starch: $13.7\;{\mu}m$). Hardness of starch gel prepared with 15% corn starch dispersion after heating to $90^{\circ}C$ at different heating rates decreased gradually with increasing heating rate, then showed nearly constant value from $9.4\;to\;23.2^{\circ}C/min$. Hardness increased with increase of heating rate higher than $23.2^{\circ}C/min$.