• Advances in Energy Research
• /
• v.4 no.1
• /
• pp.1-28
• /
• 2016

A grid-connected photovoltaic (PV) system comprised of multicrystalline silicon (mc-Si) modules was installed in a cold climate region in the U.S. This roof-mounted stationary PV system is a real-world application of PV for building energy generation in International Energy Conservation Code (IECC) Climate Zone 5 (and possibly similar climate zones such as 6, 7 and 8), and it served the purposes of research, demonstration, and education. The importance of this work is highlighted by the fact that there has been less emphasis on solar PV system in this region of the U.S. because of climate and latitude challenges. The system is equipped with an extensive data acquisition system capable of collecting performance and meteorological data while visually displaying real-time and historical data through an interactive online interface. Experimental data was collected and analyzed for the system over a one-year period with the focus of the study being on measurements of power production, energy generation, and efficiency. The annual average daily solar insolation incident upon the array was found to be $4.37kWh/m^2$. During the first year of operation, the PV system provided 5,801 kWh (1,264 kWh/kWp) of usable AC electrical energy, and it was found to operate at an annual average conversion efficiency and PR of 10.6 percent and 0.79, respectively. The annual average DC to AC conversion efficiency of the inverter was found to be 94 percent.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.191-201
• /
• 1999

There have been a huge volume of researches concerning dispatching rules in job shop environments. Strangely, studies all but one pay no attention to multiple identical jobs due to the existence of production orders each of which calls for a fixed quantity, called an order size, of a specific part. Jobs arrive in the form of production orders in most, if not all, job shop type flexible manufacturing systems. This paper presents simple processing-time-based dispatching rules, and shows experimentally based on simulation that the rules with order-size considerations perform consistently well for tardiness and utilization measures. Several alternative strategies for rule specifications are examined.

• KSBB Journal
• /
• v.27 no.1
• /
• pp.9-15
• /
• 2012

Antimicrobial peptides are widely used in various organisms as a defense system against infection. The peptides are lethal towards bacteria and fungi, however have minimal toxicity in mammalian and plant cells. In this aspect, it is considered that antimicrobial peptides are new alternative materials for defensing against microbial infection. Here, we describe overall characteristics of antimicrobial peptides based on the mechanism of action, classification of the peptides, report detection/screening methods and chemical/biological production. It is expected that understanding of innate immune system based on antimicrobial peptides tends to develop novel natural antimicrobial agents, which might be applied for defensing pathogenic microorganisms resistant to conventional antibiotics.

• KSTLE International Journal
• /
• v.1 no.2
• /
• pp.113-117
• /
• 2000

The rotary-vane compressor has become one of the most successful types of compressors because of its mechanical reliability, compactness, and adaptability to moderately high-speed operation in virtually an unlimited range of sizes. However recently, the depletion of the ozone layer due to the current refrigerant(R22) has been getting worse, and it is one of the world's pressing issues. In this paper, we will discuss the use of R410a in the compressor of a room air-conditioner as an alternative refrigerant and air-conditioning system to R22, since R410a has greater refrigerant characteristics than R22. Miniaturization of the rotary compressor for the new refrigerant and air-conditioning system is also possible, which reduces the prime cost of production, hence R410a is naturally a better refrigerant. But to apply the new HFC refrigerant system in refrigeration and air-conditioning systems, a significant redesign of the current refrigerant system is also required, because as the refrigeration changes, lubrication characteristics vary. Close attention must be paid to friction force and energy loss due to friction and wear at many sliding areas.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.607-612
• /
• 2000

Microprecision agriculture for a fully controlled plant factory is proposed in this paper. Microprecision agriculture can be attained by using plant factories to realize profitable alternative agriculture. A closed, fully controlled, plant-growing factory is far better in terms of minimizing all sorts of waste. The limit and optimum design concept has to be applied to establish an economically feasible, fully controlled, plant-growing factory. To achieve this objective, microprecision technologies have to be developed. Microprecision technologies should be involved in sensing, modeling, controlling, and collecting information for the mechatronics for plant production. Basic technologies for microprecision are already available; they are SPA (speaking plant approach to environmental control), AI (artificial intelligence: expert systems, neural networks, genetic algorithms, photosynthetic algorithms etc.), bioinstrumentation, non-invasive measurement, biomechatronics, and biorobotics. A microprecision irrigation system for plug production is an example of a microprecision technology that has actually been implemented in a plug seedling production factory.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2000

A new alternative for large deepwater field development is described. This "Oil Box" (aka "Box Spar") is a multifunction vessel capable of floating drilling, production, storage and offloading (FDPSO). It is distinguished from other Floating Production, Storage and Offloading (FPSO) vessels by its unique hull form and oil storage system. It's main advantages are flexibility derived from the floatover deck option, use of proven top tensioned riser technology, and motion characteristics which make it operable in a wide range of environmental conditions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.351-360
• /
• 2016

Rapid population growth with high living standards and high electronics use for personal comfort has raised the electricity demand exponentially. To fulfill this elevated demand, conventional energy sources are shifting towards low production cost and long term usable alternative energy sources. Hybrid renewable energy systems (HRES) are becoming popular as stand-alone power systems for providing electricity in remote areas due to advancement in renewable energy technologies and subsequent rise in prices of petroleum products. Wind and solar power are considered feasible replacement to fossil fuels as the prediction of the fuel shortage in the near future, forced all operators involved in energy production to explore this new and clean source of power. Presented paper proposes fuzzy logic based Energy Management System (EMS) for Wind Turbine (WT), Photo Voltaic (PV) and Diesel Generator (DG) hybrid micro-grid configuration. Battery backup system is introduced for worst environmental conditions or high load demands. Dump load along with dump load controller is implemented for over voltage and over speed protection. Fuzzy logic based supervisory control system performs the power flow control between different scenarios such as battery charging, battery backup, dump load activation and DG backup in most intellectual way.

• Journal of agriculture & life science
• /
• v.44 no.3
• /
• pp.7-14
• /
• 2010

Alternative subirrigation way, capillary wick system (CWS) was tested to reduce labor cost, waste water, contamination of ground water, and use of fungicide compared to overhead irrigation system (OIS). CWS helped reduce remarkably the working hours for watering from 4 hours in OSI to just 5 minutes. Labor cost was saved 98% in CWS compared to OIS. By the physical characteristics of various growing media, 1 coconut coir+2 perlite (v/v) mixture was selected because it had an ideal distribution of three phase, e.g. 1 solid: 1 liquid: 2 gas phase. Medium mixture containing scoria had so high bulk and particle density to hurt root. In bark-containing medium, the liquid phase and the percent saturation of liquid phase with time elapsed was lower than that of other mixture. It meant that the mixture contained very low level of water. Application of CWS for cyclamen pot production played an important role in reducing the incident of fusarium wilt symptom from 18% in conventional over watering system to 4%. Cyclamen pot irrigated by capillary wick had shorter petiole and more leaves than those by overhead watering. As a result, this system was highly beneficial to get uniform pot products with high quality. It improved water and nutrient solution efficiency relative to conventional overhead irrigation system (OIS).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.4
• /
• pp.467-475
• /
• 2014

This study was performed to estimate optimum fishing mortality (F) and the age at first capture ($t_c$) for small yellow croaker in Korean waters. We first estimated optimum F and $t_c$ using traditional yield-per-recruit (YPR) analysis, and the results were 0.8/year and 2.5 years old, respectively. However, the individual fish price per unit weight of small yellow croaker in Korea increases dramatically by size. Thus, we developed an alternative method, which is called as production value-per-recruit (PPR) analysis. We developed two types of the PPR analysis, that is, the discrete function and the continuous function method. We estimated optimum F and $t_c$ using the two types of the PPR analysis and compared the results. The optimum F and $t_c$ from the discrete function method, were 0.3/year and 5.0 years old, respectively, while those from the continuous function method were 0.5/year and 3.5 years old, respectively. These PPR estimates were much more conservative for the stock management than the traditional YPR analysis, which can prevent the fish stock from the economic overfishing. As a result, the PPR analysis could be more proper approach for stock assessment in the case that the individual fish price per unit weight increases dramatically by size like small yellow croaker in Korea.

• Journal of the Speleological Society of Korea
• /
• no.95
• /
• pp.15-21
• /
• 2009

Global village warming and carbon dioxide CO2 gas, and the human efforts for their healing and necessary alternative technology would be much more difficult things than that of making necessary funds and efforts to lay to sleep angry nature on the earth. The limited natural resources of fossil fuel would be dried up in several decades, and the intensity of diplomatic negotiations for natural resource guarantee among countries may be showed looking alike an war. The drain of fossil fuel called a new word of alternative policy like an environment-friendly green-growth, and the solar-cell and lighting technology for the solar energy applications were developed still more repeatedly day by day from oil lantern to LED high-tech illumination in great economy. Therefore, it was studied that the low-carbon green-growth illumination technology in cave applications with SOLAR-LED system which was produced and unified in connection with solar-cell and LED from the semiconductor production technology, and it was also clarified in necessary with useful cave lighting in heatless and with no photosynthesis of plant production in underground space.