• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.6
• /
• pp.302-308
• /
• 2021

The aim of this study was to investigate the dependence of the hardness and thermal conductivity on the volume fraction of discontinuous precipitates (DPs) in the Mg-9.3%Al alloy with (α-(Mg)+DPs) dual phase structure. In order to obtain various DPs volume fractions, the alloy was solution-treated at 688 K for 24 h and then aged at 418 K for up to 144 h. The volume fraction of DPs increased from 0% to 63% with an increase in the aging time up to 72 h, over which, continuous precipitation was observed within the α-(Mg) grains. It is noticeable that the hardness and thermal conductivity of the alloy increased linearly with the volume fraction of DPs. The improved hardness and thermal conductivity with respect to volume fraction of DPs are closely associated with the higher hardness of the DPs with fine (α+β) lamellar structure and the lower Al concentration in the α phase layer of the DPs, respectively.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.155-164
• /
• 2007

This study is to find out effective defensive type by analysis on differences among three different defence types of the body lock technique in the ground wrestling. The subjects are 5 athletes who are in 60kg weight class. To get the kinematic analysis seven ProReflex MCU-240(Motion Capture Unit), infrared rays cameras, which was produced by Qualisys, were used to get a two-dimensional coordinate. Following are the analysis result from kinematic factors such as time element, speed element and angular element. 1. During position of ground wrestling, the average necessary time until defender's hip joint touches the mat for Phase1 was $0.34{\pm}0.14sec$ at side position was the shortest space of time out of three types, and Phase2 was $0.21{\pm}0.02sec$ at front position was the shortest space of time out of three types. Moreover, side defence position was the shortest for total average necessary time with $0.78{\pm}0.05sec$. 2. The movement change for hip joint was $57.21{\pm}20.17cm$ for front, $43.35{\pm}7.13cm$ for rear, and $18.67{\pm}10.24cm$ for side at Phase1 and $42.08{\pm}17.56cm$ for side, $16.61{\pm}6.34cm$ for front, and $1.48{\pm}1.29cm$ for rear at Phase2. 3. Movement speed of hip joint at defensive type were most effective in success and fail rate at Phase 1 and its frontal average speed was fastest with $1.01{\pm}0.23m/s$ following by $0.52{\pm}0.15m/s$ for side, and $0.62{\pm}0.15m/s$ for rear. The average for total change of speed is $0.79{\pm}0.32m/s$ for front, $0.78{\pm}0.17m/s$ for side, and $0.49{\pm}0.08m/s$ for rear. 4. The joint angle gets smaller in a order by rear, front, and side for the size of hip joint angle and knee angle for different defensive type. 5. As a result of one-way ANOVA on linear velocity for hip joint in frontal defence(phase1) was significance ($\alpha$=.05), but phase 2 was not significance. Synthetically, analyzing on differences among three different defence types which were front, rear, and side of the body lock technique in the ground wrestling, front defensive type was the most effective. In future, there should be more studies regarding on defence at not a laboratory study but a field study to help out wrestler to pertinent techniques to improve the game of wrestling.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.238-244
• /
• 2008

The essential oil was obtained from the aerial part of Caryopteris incana Miq. by steam distillation, samples were collected by headspace (HS) and solid-phase microextraction (SPME) methods, and the compositions of the essential oil were analyzed by gas chromatography-mass spectrometry (GCMS). The fragrance of the essential oil was fougere and woody. There were sixty-nine constituents in the essential oil: 28 carbohydrates, 22 alcohols, 7 acetates, 7 ketones, 3 aldehydes, and 2 others. Major constituents were 4,6,6-trimethyl [1S-($1{\alpha},2{\beta},5{\alpha}$)]-bicyclo[3.1.1]hept-3-en-2-ol (11.8%), taucadinol (9.4%), myrtenyl acetate (9.2%), pinocarvone (7.0%), 1-hydroxy-1,7-dimethyl-4-isopropyl-2,7-cyclodecadiene (6.3%), ${\delta}$-3-carene (6.2%). By SPME extraction, forty-nine constituents were identified: 22 hydrocarbons, 16 alcohols, 6 acetates, 3 ketones, and 2 ethers. Major constituents of the SPME-extracted sample were ${\delta}$-3-carene (12.6%), (-)-myrtenyl acetate (11.2%), 6,6-dimethyl-2-methylene-bicycol [3.1.1] heptan-3-o1 (10.9%), pinocarvone (9.3%). By HS extraction, ten constituents were identified: 5 hydrocarbons, 2 amines, 1 alcohol, and 2 others. Major constituents of the HS-extracted sample were (Z)-2-fluoro-2-butene (34.9%), ${\delta}$-3-carene (6.9%), 6-(4-chlorophenul)tetrahydro-2-methyl-2H-1,2-oxazine (5.9%). The $IC_{50}$ value (0.011 ${\mu}g/mg$) in MTT assay using HaCaT keratinocyte cell line was lower than those of commercially-selling rosemary and tea tree, suggesting more toxicological studies are needed for commercial use of the essential oil of Caryopteris incana Miq.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.503-510
• /
• 2005

In this research, composite alumina was prepared to add the various promoters by sol-gel method and examined its thermal stability. After sintering at $1,200^{\circ}C$, the thermal stability resulted in following order, $Si{\fallingdotseq}La$ > Ti > $Ba{\fallingdotseq}Ce$ > Y > $Zr{\fallingdotseq}Mg$, in accordance with adding the promoters. Especially in case of silica-added alumina, a phase transformation temperature to ${\alpha}$-alumina increased about $150^{\circ}C$ and after sintering at $1,200^{\circ}C$, it showed to maintain in ${\gamma}$-form and ${\delta}$-form alumina phase. Also it showed an increase of surface area from $3m^2/g$ to $71m^2/g$ compared with pure ${\alpha}$-alumina. In the case of silicaadded alumina, the characterization change of this alumina particle resulted in a delay of phase transformation because Si-O-Al bond was increased when sintered at high temperature. In case of lanthanum-added alumina, there was a sintering delay phenomenon in inter-particles as $LaAlO_3$ structure existed. The existence of lanthanum structure was confirmed by XRD and XPS analysis. It appeared on the alumina surface as $La_2O_3$ structure when it was sintered under $1,000^{\circ}C$, as the perovskite structure of $LaAlO_3$ at above $1,000^{\circ}C$ and as the magneto-plumbite structure of $LaAl_{11}O_{18}$ at above $1,300^{\circ}C$.

• Journal of Hospice and Palliative Care
• /
• v.5 no.2
• /
• pp.136-145
• /
• 2002

Purpose : This study was designed to develop an instrument that could be used for comprehensive and effective need assessment for patients with cancer. Methods : In the first phase, a conceptual framework for the instrument was established by Wingate & Lackey (1989). In the second phase, the preliminary instrument was drawn up through a review of the literature and in consultation with three professors in Nursing. In the third phase validity and reliability of the preliminary instrument were tested as follows; 1) an expert validity test of the preliminary instrument was done by nine head nurses and charge nurses who had over ten years experience caring for patients with cancer at Wonju Christian Hospital. 2) A construct validity test and reliability test was done for the instrument by 116 staff nurses selected by convience sampling from hospitals located in Kang-Won, Kyoung-Ki, and Choong-Chung Provinces. The collected data were analyzed using SPSS 10.0 WIN program. For the factors of the instrument, factor analysis was used. The reliability of the scale was analyzed by Cronbach's alpha. Results : The results of the experts' test of validity, showed that, of 32 items, only one item had less than 55.4%. It was then deleted and a total of 31 items was selected. On the basis of the results of the factor analysis, the following six components were identified: physiological, informational, spiritual, and emotional needs, available resources, and legal/financial needs. These factors explained 61.8% of the variance. In the factor analysis, the first factor (physiological needs) and the second factor (informational needs) explained 25.4% and 10.9% of the variance respectively, which were major factors for the needs of patients with cancer in Korea. Cronbach' alpha for the scale was .90 indicating internal reliability. Conclusion : This instrument can be effectively utilized for assessment of needs of patients with cancer in Korea. Use of the needs assessment instrument developed in this study will allow nurses to develop nursing interventions that provide comprehensiveness and continuity in meeting the needs of patients with cancer.

• Development and Reproduction
• /
• v.17 no.4
• /
• pp.441-449
• /
• 2013

Recent study showed that T cells in the immune organs and peripheral blood are influenced by estradiol, leading to a dysfunction of the immune system. However, little is known about the thymic-gonadal relationship during the estrous cycle in mouse. Therefore, the purpose of this study was to elucidate the mechanism by which a change in estradiol levels during the estrous cycle regulates the development of T cells in the mouse thymus. Six-week-old ICR mice were used and divided into four groups, including diestrous, proestrous, estrous, and metestrous. We first confirmed that ER-${\alpha}$ and - ${\beta}$ estrogen receptors were expressed in thymic epithelial cells, showing that their expression was not different during the estrous cycle. There was also no significant difference in thymic weight and total number of thymocytes during the estrous cycle. To determine the degree of thymocyte differentiation during the estrous cycle, we analyzed thymocytes by flow cytometry. As a result, the percentage of CD4+CD8+ double-positive (DP) T cells was significantly decreased in the proestrous phase compared to the diestrous phase. However, CD4+CD8- or CD4-CD8+ (SP) T cells were significantly increased in the proestrous phase compared to the diestrous phase. In addition, the percentage of CD44+CD25- (DN1) T cells was significantly decreased in the estrous phase compared to other phases, whereas the percentages of CD44+CD25+ (DN2), CD44-CD25+ (DN3), and CD44-CD25- (DN4) were not changed during the estrous cycle. These results indicate that the development of thymocytes may arrest in the DP to SP transition stage in the proestrous phase displaying the highest serum level of estradiol. This study suggests that a change in estradiol levels during the estrous cycle may be involved in the regulation of thymocyte differentiation in the mouse thymus.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.9
• /
• pp.1602-1608
• /
• 2007

The composites were fabricated, respectively, using 61[vol.%] SiC-39[vol.%] $TiB_2$ and using 61[vol.%] SiC-39[vol.%] $ZrB_2$ powders with the liquid forming additives of 12[wt%] $Al_2O_3+Y_2O_3$ by hot pressing annealing at $1650[^{\circ}C]$ for 4 hours. Reactions between SiC and transition metal $TiB_2$, $ZrB_2$ were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H, 3C), $TiB_2$, $ZrB_2$ and $YAG(Al_5Y_3O_{12})$ crystal phase on the Liquid-Phase-Sintered(LPS) $SiC-TiB_2$, and $SiC-ZrB_2$ composite. $\beta\rightarrow\alpha-SiC$ phase transformation was occurred on the $SiC-TiB_2$ and $SiC-ZrB_2$ composite. The relative density, the flexural strength and Young's modulus showed the highest value of 98.57[%], 249.42[MPa] and 91.64[GPa] in $SiC-ZrB_2$ composite at room temperature respectively. The electrical resistivity showed the lowest value of $7.96{\times}10^{-4}[\Omega{\cdot}cm]$ for $SiC-ZrB_2$ composite at $25[^{\circ}C]$. The electrical resistivity of the $SiC-TiB_2$ and $SiC-ZrB_2$ composite was all positive temperature coefficient resistance (PTCR) in the temperature ranges from $25[^{\circ}C]$ to $700[^{\circ}C]$. The resistance temperature coefficient of composite showed the lowest value of $1.319\times10^{-3}/[^{\circ}C]$ for $SiC-ZrB_2$ composite in the temperature ranges from $100[^{\circ}C]$ to $300[^{\circ}C]$ Compositional design and optimization of processing parameters are key factors for controlling and improving the properties of SiC-based electroconductive ceramic composites.

• Journal of Microbiology
• /
• v.42 no.4
• /
• pp.319-327
• /
• 2004

An additional amylase, besides the typical $\alpha-amylase,$ was detected for the first time in the cytoplasm of B. subtilis SUH4-2, an isolate from Korean soil. The corresponding gene (bbmA) encoded a malto­genic amylase (MAase) and its sequence was almost identical to the yvdF gene of B. subtilis 168, whose function was unknown. Southern blot analysis using bbmA as the probe indicated that this gene was ubiquitous among various B. subtilis strains. In an effort to understand the physiological function of the bbmA gene in B. subtilis, the expression pattern of the gene was monitored by measuring the $\beta-galactosidase$ activity produced from the bbmA promoter fused to the amino terminus of the lacZ struc­tural gene, which was then integrated into the amyE locus on the B. subtilis 168 chromosome. The pro­moter was induced during the mid-log phase and fully expressed at the early stationary phase in defined media containing $\beta--cyclodextrin\;(\beta-CD),$ maltose, or starch. On the other hand, it was kept repressed in the presence of glucose, fructose, sucrose, or glycerol, suggesting that catabolite repression might be involved in the expression of the gene. Production of the $\beta-CD$ hydrolyzing activity was impaired by the spo0A mutation in B. subtilis 168, indicating the involvement of an additional regu­latory system exerting control on the promoter. Inactivation of yvdF resulted in a significant decrease of the $\beta-CD$ hydrolyzing activity, if not all. This result implied the presence of an additional enzyme(s) that is capable of hydrolyzing $\beta-CD$ in B. subtilis 168. Based on the results, MAase encoded by bbmA is likely to be involved in maltose and $\beta-CD$ utilization when other sugars, which are readily usable as an energy source, are not available during the stationary phase.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.9
• /
• pp.4101-4107
• /
• 2014

Protein phosphatase 1 (PP1) is a major serine/threonine phosphatase that controls gene expression and cell cycle progression. The active mutant IPP5 ($8-60hIPP5^m$), the latest member of the inhibitory molecules for PP1, has been shown to inhibit the growth of human cervix carcinoma cells (HeLa). In order to elucidate the underlying mechanisms, the present study assessed overexpression of $8-60hIPP5^m$ in HeLa cells. Flow cytometric and biochemical analyses showed that overexpression of $8-60hIPP5^m$ induced G2/M-phase arrest, which was accompanied by the upregulation of cyclin B1 and phosphorylation of G2/M-phase proteins ATM, p53, $p21^{cip1/waf1}$ and Cdc2, suggesting that $8-60hIPP5^m$ induces G2/M arrest through activation of the ATM/p53/$p21^{cip1/waf1}$/Cdc2/cyclin B1 pathways. We further showed that overexpression of $8-60hIPP5^m$ led to delayed nuclear translocation of cyclin B1. $8-60hIPP5^m$ also could translocate to the nucleus in G2/M phase and interact with $pp1{\alpha}$ and Cdc2 as demonstrated by co-precipitation assay. Taken together, our data demonstrate a novel role for $8-60hIPP5^m$ in regulation of cell cycle in HeLa cells, possibly contributing to the development of new therapeutic strategies for cervix carcinoma.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.3
• /
• pp.102-105
• /
• 2010

PURPOSE. The aims of this study were to suggest a method of fabrication of the record base using a light-polymerized resin by applying the two-phase fabrication method for the improvement of the fit of the record base and to compare the degree of fit according to the separation site. MATERIALS AND METHODS. In the edentulous cast of maxilla, four test groups were considered. In the first, second, third, and fourth test groups (n = 12 in each group) the separation was done at 0, 5, 10, and 15 mm, respectively below the alveolar crest along the palatal plane. For the control group, the record base was made without separating the two sections. The light-body silicone material was injected into the fitting surface of the record base. It was then placed onto the cast and finger pressure was applied to stabilize it in a seated position followed by immediate placement onto the universal test device. Finally, the mass of the impression material was measured after it was removed. ANOVA was performed using the SAS program. For the post-hoc test, the Wilcoxon Rank-Sum test and the Tukey-Kramer HSD test were performed ($\alpha$ = 0.05). RESULTS. The control group and Group 3, 4 showed significant differences. The Group 3 and 4 showed significantly smaller inside gaps than the control group which was not made with the two-phase fabrication method. CONCLUSION. The two-stage polymerized technique can improve the fit of the denture base particularly when the separation was made at 10 to 15 mm from the alveolar crest.