• Title/Summary/Keyword: Alpha phase

Search Result 1,603, Processing Time 0.026 seconds

Development of an Instrument to Measure Meaning of Life(MOL) for Higher Grade Primary School Children (학령기 후기 아동의 삶의 의미 측정도구 개발)

  • Kang, Kyung-Ah;Song, Mi-Kyung;Sim, Song-Yong;Kim, Sung-Hee;Kim, Shin-Jeong
    • Child Health Nursing Research
    • /
    • v.13 no.3
    • /
    • pp.308-317
    • /
    • 2007
  • Purpose: The purpose of this study was to develop a MOL instrument for school-age children in grades 4 through 6. Method: The research design was a methodological study. A four-phase design involved. 1) Interview data generated from professors, nurses, and elementary school students (n=8). 2) Content validation by expert panel (n=14) 3) Initial items corrected by elementary school students (n=20) 4) Instrument validation by survey (n=574). Finally, 24 items were chosen as a meaning of life scale for late school-age children. Results: The Cronbach's alpha coefficient of 24 items was .893 indicated a high internal consistency of the instrument, 2) Through factor analysis, 5 factors were extracted. These factors were labeled as 'relational experience', 'positive attitude', 'satisfaction/ hope', 'pursuit of goal', and experience of family love. These factors explained 52.311% of the total variance. Conclusion: The MOL scale for late school-age children can be used in nursing programs to improve the meaning of life. Studies on difference in meaning of life for late school-age children are needed for reverification.

  • PDF

Mass Production of Mg based Hydrogen Absorbing Alloys and Evalution of Hydrogenation and Degradation Properties by Hydriding/Dehydriding Cyclic Test (교반관법에 의한 Mg 기지 수소저항합금의 대량제조와 반복적 수소화 반응에 따른 수소화 특성 및 열화특성 평가)

  • Ha, Won;Lee, Sung-Gon;Hong, Tae-Whan;Kim, Young-Jig
    • Journal of Hydrogen and New Energy
    • /
    • v.13 no.1
    • /
    • pp.13-23
    • /
    • 2002
  • Hydrogenation properties of Mg-Ni and Mg-Ti-Ni alloys were investigated by Pressure-Composition Isotherm (PCI) test. Those alloys were fabricated by a new alloying method, Rotation-Cylinder Method (RCM). The as-cast microstructure of Mg-10 mass% Ni alloy consists of an island-like hydride forming $\alpha$-Mg phase and the eutectic structure. After 350 cyclic tests, Mg-lO mass % Ni alloy was pulverized into fine particles of 100 nm. The fine particles, which have a large specific surface area, are highly reactive with hydrogen. However, extreme pulvehzation can separate Mg from $Mg_2Ni$ in the eutectic structure, so $Mg_2Ni$ of the eutectic structure cannot behave as a dissociated hydrogen supplier.

High-yield Purification and Characterization of Recombinant Human Leukotactin-1 in Pichia pastoris

  • Lim, In-Hwan;Lee, Kong-Ju;Lee, Eun-Kyoung;Park, Mu-Rim;Lee, Gue-Wha;Yeup Yoon;Park, Doo-Hong;Jung, Kyung-Hwan
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • v.9 no.1
    • /
    • pp.1-6
    • /
    • 2004
  • The human chemokine, the short version of leukotactin-1(shLkn-1;molecular weight=7.2 kD and 66 amino acids), was expressed and secreted into a culture medium using the me-thylotrophic yeast, Pichia pastoris. The recombinant shLkn-1 was purified from the culture supernatant using a simple two-step procedure consisting of cation exchange and reverse phase chromatography(RPC), in which shLkn-1 was highly purified (99.5%) with a high recovery yield of 82.7%. The C-terminal truncated derivative of shLkn-1 was found in the supernatant and was separated by RPC. The physicochemical properties of the purified shLkn-1 were verified to be the same as expected. The biological activity of the purified recombinant shLkn-1 was also quantified using a chemotaxis assay. It was observed that the recombinant shLkn-1 had the maximum migration activity at a concentration of 10nM, as potent as MIP-1${\alpha}$.

Fabrication of an Optical Hydrogen Sensor Based on 3C-SiC Photovoltaic Effect and Its Characteristics (3C-SiC 광기전 특성 기반 광학식 수소센서의 제작과 그 특성)

  • Kim, Kang-San;Chung, Gwiy-Sang
    • Journal of Sensor Science and Technology
    • /
    • v.21 no.4
    • /
    • pp.283-286
    • /
    • 2012
  • This paper presents the optical hydrogen sensor based on transparent 3C-SiC membrane and photovoltaic effect. Gasochromic materials of Pd and Pd/$WO_3$ were deposited by sputter on 3C-SiC membrane for gas sensing area. Gasochromic materials change to transparency by exposure to hydrogen. The variations of light intensity by hydrogen generate the photovoltaic of P-N junction between N-type 3C-SiC and P-type Si. Single layer of Pd shows higher photovoltaic compared with Pd/$WO_3$. However, phase transition from ${\alpha}$ to ${\beta}$ is shown at 6 %. Pd/$WO_3$ structure show the more linear response to hydrogen range of 2 % ~10 %. Also, almost 2 times fast response and recovery characteristics are shown at Pd/$WO_3$. These fast performances are come from the fact that Pd promoted the chemical reaction between hydrogen and $WO_3$.

Isolation and Characterization of an Anti-listerial Bacteriocin from Leuconostoc lactis SD501

  • Hwang, In-Chan;Oh, Ju Kyoung;Kim, Sang Hoon;Oh, Sejong;Kang, Dae-Kyung
    • Food Science of Animal Resources
    • /
    • v.38 no.5
    • /
    • pp.1008-1018
    • /
    • 2018
  • Although bacteriocins with anti-listerial activity have been isolated from a wide variety of lactic acid bacteria, little is known about those from Leuconostoc lactis, a heterofermentative bacterium that produces diacetyl and exopolysaccharides in dairy foods. In this study, an anti-listerial bacteriocin was isolated from Leuc. lactis SD501 and characterized. It was particularly potent against Listeria monocytogenes and also inhibited Enterococcus faecalis. Anti-listerial activity reached a maximum during the early stationary phase and then decreased gradually. The anti-listerial substance was sensitive to proteinase K and ${\alpha}$-chymotrypsin, confirming its proteinaceous nature. Its activity remained stable at pH values ranging from 1 to 10. In addition, it was strongly resistant to high temperatures, retaining its activity even after incubation for 15 min at $121^{\circ}C$. The apparent molecular mass of the partially purified anti-listerial bacteriocin was approximately 7 kDa. The characteristics of the SD501 bacteriocin, including its small molecular size (<10 kDa), strong anti-listerial activity, wide pH stability and good thermostability, indicate its classification as a Class IIa bacteriocin.

Characterization of tantalum silicide films formed by composite sputtering and rapid thermal annealing

  • Cho, Hyun-Choon;Paek, Su-Hyon;Choi, Jin-Seok;Mah, Jae-Pyung;Ko, Chul-Gi;Kim, Dong-Won
    • Korean Journal of Materials Research
    • /
    • v.2 no.1
    • /
    • pp.27-34
    • /
    • 1992
  • Tantalum silicide films are prepared from a composite $TaSi_{28}$ target source and subjected to rapid thermal annealing($500-1100^{\circ}C$, 20sec) in Ar ambient. The formation and the properties of tantalum silicides have been investigated by using 4-point probe, x-ray diffraction, scanning electron microscope(SEM), Auger electron spectroscope(AES), and ${\alpha}$-step. It has been found that the sample annealed above $700^{\circ}C$ forms a polycrystalline $TaSi_2$ phase, and grains grow in granular form regardless of the kind of substrates. The mechanism of the formation of tantalum silicide is the nucleation and growth by Ta-Si short range reaction. The tantalum silicide film has the relatively low resistivity($70-72.5{\mu}{\Omega}-cm$) and smooth surface roughness.

  • PDF

On the Reaction Kinetics of GaN Particles Formation from GaOOH (GaOOH로부터 GaN 분말 형성의 반응역학에 관하여)

  • Lee Jaebum;Kim Seontai
    • Korean Journal of Materials Research
    • /
    • v.15 no.5
    • /
    • pp.348-352
    • /
    • 2005
  • Gallium oxyhydroxide (GaOOH) powders were heat-treated in a flowing ammonia gas to form GaN, and the reaction kinetics of the oxide to nitride was quantitatively determined by X-ray diffraction analysis. GaOOH turned into intermediate mixed phases of $\alpha-\;and\;\beta-Ga_2O_3$, and then single phase of GaN. The reaction time for full conversion $(t_c)$ decreased as the temperature increased. There were two-types of rapid reaction processes with the reaction temperature in the initial stage of nitridation at below $t_c$, and a relatively slow processes followed over $t_c$ does not depends on temperatures. The nitridation process was found to be limited by the rate of an interfacial reaction with the reaction order n value of 1 at $800^{\circ}C$ and by the diffusion-limited reaction with the n of 2 at above $1000^{\circ}C$, respectively, at below $t_c$. The activation energy for the reaction was calculated to be 1.84 eV in the temperature of below $830^{\circ}C$, and decreased to 0.38 eV above $830^{\circ}C$. From the comparative analysis of data, it strongly suggest the rate-controlling step changed from chemical reaction to mass transport above $830^{\circ}C$.

Processing and Properties of 30 wt% β-Tricalcium Phosphate/Al2O3 Composites (30 wt% β-Tricalcium Phosphate/Al2O3 복합재료의 제조 및 특성)

  • Jeong, Heecheol;Ha, Jung-Soo
    • Korean Journal of Materials Research
    • /
    • v.28 no.3
    • /
    • pp.142-147
    • /
    • 2018
  • ${\beta}-Tricalcium$ phosphate (TCP) was added to $Al_2O_3$ to make a biomaterial with good mechanical properties. Using a TCP powder synthesized by a polymer complexation method, $Al_2O_3$ composites containing 30 wt% TCP were fabricated and characterized for densification, phase, microstructure, strength, and fracture toughness. With optimizing the powder preparation conditions, a high densification of 97 % was obtained by sintering at $1350^{\circ}C$ for 2 h. No reaction between the two components occurred and there was no transition to ${\alpha}-TCP$. TCP grains with a size of $2-4{\mu}m$ were well surrounded by $Al_2O_3$ grains with a size of $1{\mu}m$ or less. Strength 61(Brazilian) or 187(3-p MOR) MPa, and fracture toughness 1.7 (notched beam) or 2.5 (indentation) $MPa{\cdot}m^{1/2}$ were obtained, which are large improvements over the strength of $TCP/Al_2O_3$ composites and toughness of TCP and hydroxyapatite in previous studies.

Sintering and Electrical Properties of Cr2O3-doped ZnO (Cr2O3를 첨가한 ZnO의 소결과 전기적 특성)

  • Hong, Youn-Woo;Shin, Hyo-Soon;Yeo, Dong-Hun;Kim, Jin-Ho
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.23 no.11
    • /
    • pp.875-879
    • /
    • 2010
  • In this study, we have characterized the roles of $Cr_2O_3$ on the sintering and electrical properties of ZnO. The densification and grain growth of Cr-doped ZnO (ZCr) system was mainly influenced by Cr contents. In the beginning of sintering, the densification of ZnO was retarded as reducing the Zni concentration in ZnO lattice with Cr doping. And the densification and grain growth of ZnO was more retarded due to a formation of spinel phase with increasing the Cr contents. ZCr system revealed varistor behavior with nonlinear coefficient $\alpha$ of 3~23 depending on the sintering temperature, implying double Schottky barrier formation on the grain boundary of ZnO. Especially the best varistor characteristics should be developed with 0.1~0.5 at% Cr contents and under $1100^{\circ}C$ in ZCr systems.

A Study of the Anticoagulatory DNA from the Earthworm, Lumbricus rubellus, and its Regulatory DNA-Binding Protein

  • Kim, Gyoung-Mi;Yu, Kyoung-Hee;Woo, Jeong-Im;Bahk, Yun-Kyoung;Paik, Seung R.;Kim, Jung-Gyu;Chang, Chung-Soon
    • BMB Reports
    • /
    • v.32 no.6
    • /
    • pp.567-572
    • /
    • 1999
  • We have previously shown that a DNA fragment is responsible for the anticoagulatory effect of an earthworm, Lumbricus rubellus. The anticoagluant increased the activated partial thromboplastin time (APTT) and also inhibited the thrombin activity observed with either N-${\alpha}$-p-tosyl-L-arginine methyl ester (TAME) or H-D-phenyl-alanyl-L-pipecoil-L-arginine-p-nitroanilide (S-2238). Since trypsin digestion of the anticoagulant further increased the APTT, the possible presence of a regulatory protein for the anticoagulatory DNA was investigated by digesting the anticoagulant with trypsin and isolating the DNA fragment with C4-reversed phase HPLC. The DNA fragment lacking a regulatory protein was eluted in the flow-through fraction, and analyzed with thrombin and activated factor X. Activated factor X activity was more strongly inhibited than thrombin activity. For DNA digestion, we treated the anticoagulant with DNase and purified the DNA-binding protein with a FPLC Resource-S cation exchange column. The regulatory protein, with an $M_r$ of 55.0 kDa, reduced the anticoagulatory effect of the DNA fragment.

  • PDF