• Journal of Hydrogen and New Energy
• /
• v.7 no.1
• /
• pp.11-18
• /
• 1996

The Laves phase alloy hydrides have some promising properties as electrode materials in reversible metal hydride batteries. In this work, the hydrogen storage performance, crystallographic parameters, surface morphology, surface area and electrochemical characteristics of the non-stoichiometric $ZrMn_{0.3}V_{0.7}Ni_{1.4+{\alpha}}$, $ZrMn_{0.5}V_{0.5}Ni_{1.4+{\alpha}}$($\alpha$ =0.0, 0.2, 0.4, 0.6) alloys were examined. These as-cast alloys were found to have mainly a cubic C15-type Laves phase structure by X -ray diffraction analysis. The equilibrium pressure of the alloy were increased as $\alpha$ increased in both two types alloy. In case of $ZrMn_{0.5}V_{0.5}Ni_{1.4+{\alpha}}$ alloys, discharge efficiency and the rate capability of the alloy were decreased as $\alpha$ increased but, these values were increased in case of $ZrMn_{0.3}V_{0.7}Ni_{1.4+{\alpha}}$ alloys. The differences of these electrode properties observed were dependent on the reaction surface area and the catalytic activity of unit area of the each electrode.

• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.5
• /
• pp.220-226
• /
• 2016

The mechanical properties of Ti-6Al-4V can be improved by microstructural control through the heat treatment in ${\alpha}+{\beta}$ region. The heat treatment was carried out with a variety of heat treatment temperatures and holding times to find the optimized heat treatment conditions and it was analyzed by linking the microstructural characteristics and mechanical properties. The part of ${\beta}$ phase with $10{\pm}2wt%$ vanadium was transformed into ${\alpha}^{{\prime}{\prime}}$ martensite phase after quenched, so the hardness and tensile properties were decreased below $900^{\circ}C$. The higher the heat treatment temperature is, the smaller is the vanadium-rich region, which leads to transformation into hcp ${\alpha}^{\prime}$ martensite above $900^{\circ}C$. The hardness and tensile properties were improved due to the hard ${\alpha}^{\prime}$ martensite. As the holding times were longer, the hardness and tensile properties decreased below $900^{\circ}C$ because of the softening effect by the grain growth. When varying the holding times above $900^{\circ}C$, the change of mechanical properties was slight because the softening effect of grain growth and the strengthening effect of ${\alpha}^{\prime}$ phase were counteractive. Therefore, the best conditions of heat treatment, which is in the range of $920{\sim}960^{\circ}C$, 40 min, WQ, can effectively improve the mechanical properties of Ti-6Al-4V.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.53-63
• /
• 1992

M/BM -series catalysts, $MoO_3$ supported on ${\alpha}-Bi_2Mo_3O_{12}$ were also prepared by impregnation method. BM/M-series catalysts, ${\alpha}-Bi_2Mo_3O_{12}$ supported on $MoO_3$ were also prepared by coprecipitation. Structure and catalytic properties of the two phase catalysts were studied by means of using nitrogen adsorption, X-ray diffraction, and scanning electron microscopy. The reaction test for the selective oxidation of propylene to acrolein over Bi-molybdate catalysts was studied using a fixed-bed reactor system. In M/BM-series catalysts, $MoO_3$ was dispersed on ${\alpha}-Bi_2Mo_3O_{12}$, and the crystal structure of ${\alpha}-Bi_2Mo_3O_{12}$ remains unchanged by the presence of excess $MoO_3$. However the surface morphology and bulk structure of BM/M-series catalysts were altered probably because the precipitated $Bi(OH)_3$ reacted with $MoO_3$ during the calcination to form ${\alpha}-Bi_2Mo_3O_{12}$ phase. The results of propylene oxidation on both series catalysts showed that the reaction took place over the surface of ${\alpha}-Bi_2Mo_3O_{12}$ particle and the role of excess $MoO_3$ was to supply oxygen to ${\alpha}-Bi_2Mo_3O_{12}$. These increasing effects on activity were also observed in the mechanical mixtures of ${\alpha}-Bi_2Mo_3O_{12}$ and $MoO_3$.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.10 no.1
• /
• pp.11-19
• /
• 2007

Purpose: Henoch-Sch$\"{o}$nlein purpura (HSP) is a systemic vasculitis involving the skin, joints, gastrointestinal tract, and kidney. Although the pathogenesis of HSP is still unclear, tumor necrosis factor (TNF-${\alpha}$) is regarded as an important cytokine contributing to the disease. The goal of this study was to determine the role of TNF-${\alpha}$ in the pathogenesis of HSP, and to evaluate the TNF-${\alpha}$ polymorphism for genetic susceptibility to HSP. Methods: From March 2004 to November 2005, 40 children with HSP and 32 healthy controls were included. Serum TNF-${\alpha}$ levels were measured using the ELISA method during the acute and convalescent phase of HSP. The genotypic and allelic frequencies of the TNF-${\alpha}$ gene polymorphisms at positions -308 and -238 were evaluated in patients and controls. Results: Serum TNF-${\alpha}$ levels were $23.17{\pm}11.31$ pg/mL in the acute phase of children with HSP and $10.56{\pm}5.59$ pg/mL in the convalescent phase (p=0.000). There was no significant correlation between the serum TNF-${\alpha}$ levels and the clinical scores of HSP (r=0.310, p=0.070). The genotypic frequency of the TNF-${\alpha}$ -308 polymorphism in children with HSP was not significantly different compared to healthy controls (GG 80%, GA 20% vs. GG 93.8%, GA 6.2%; p=0.094). The genotypic frequency of the TNF-${\alpha}$ -238 polymorphism in children with HSP was not significantly different (GG 97.5%, GA 2.5% vs. GG 93.8%, GA 6.3%; p=0.429). Conclusion: TNF-${\alpha}$ is assumed to be the main cytokine associated with the pathogenesis of HSP during the acute phase. However, the presence of TNF-${\alpha}$ gene polymorphisms at positions -308 and -238 did not distinguish children with HSP from normal controls.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.490-494
• /
• 1991

The ${\beta} to {\alpha}$ phase transition in silver iodide is studied with the (N, V, E) and (N, P, T) molecular dynamics (MD) method. In experiments, the phase transition temperature is 420 K. Upon heating of ${\beta}$ form, the iodine ions undergo hcp to bcc transformation and silver ions become mobile. MD simulations for the ${\beta}$ and ${\alpha}$ phases are carried out at several temperatures and the radial distribution functions (rdf) are obtained at those temperatures in the (N, V, E) ensemble. But the phase transition is not found in our calculation. Next the phase transition is studied with the (N, P, T) MD and we find some evidences of phase transition. At 3 Kbars and 2 Kbars the phase transition temperatu re is about 300 K. For 3.55 Kbars, the phase transition is higher (420 K) than the low pressure case. The phase transition temperature is somewhat dependent on the pressure in our calculations.

• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.242-246
• /
• 2004

Nano-sized a-alumina with a narrow distribution was prepared by using Flame Spray Pyrolysis (FSP). The microemulsion of water in oil (W/O) was prepared to make ultrafine droplets for FSP process. Kerosene (fuel) as a continuos phase and Al(NO$_3$)$_3$$.$9$H_2O$ (oxidizer) aqueous solution as a dispersed phase were prepared for microemulsification. The microemulsion with dispersion stability was obtained by adjusting the composition of 80 vol% kerosene, 10 vol% aqueous solution, and 10 vol% emulsifying agent. Microemulsion was sprayed onto the flame by using two-fluid nozzle spray gun under the condition of 0.03 ㎫ air pressure. The synthesized products were $\alpha$-alumina phase with the size of 20 to 30 nm.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.37-42
• /
• 2007

The biotransformation of monoterpenic agro-industrial wastes (turpentine oil and essential orange oil) was studied. More than 40 fungal strains were isolated from Brazilian tropical fruits and eucalyptus trees and screened for biotransformation of the waste substrates. Solid phase microextraction was used to monitor the presence of volatile compounds in the headspaces of sporulated surface cultures. The selected strains were submitted to submerged liquid culture. The biotransformation of R-(+)-limonene and ${\alpha},\;{\beta}-$ pinenes from the oils resulted in ${\alpha}-terpineol$ and perillyl alcohol, and verbenol and verbenone, respectively, as the main products. The selected strains were also placed in contact with ${\alpha}-$ and ${\beta}-$ pinenes standards. It was confirmed that verbenol, verbenone, and ${\alpha}-terpineol$ were biotransformation products from the terpenes. A concentration of 90 mg/L of verbenone was achieved by Penicillium sp. 2360 after 3 days of biotransformation.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.11a
• /
• pp.52-53
• /
• 1993

• Preventive Nutrition and Food Science
• /
• v.12 no.2
• /
• pp.115-118
• /
• 2007

Tocopherols are important lipid-phase antioxidants that are subject to heat degradation. Therefore, kinetic analyses for oxidative degradation of tocopherols as a function of temperatures and times were performed. Alpha-, gamma- and delta-tocopherols dissolved in glycerol were heated at 100${\sim}$250$^{\circ}C$ for 5～60 min. Oxidized tocopherols were analyzed by HPLC using a reversed phase ${\mu}$-Bondapak C$_{18}$-column with two kinds of elution solvent systems in a gradient mode. The degradation kinetics for tocopherols followed a first-order kinetic model. The rate of tocopherol degradation was dependent on heating temperatures. The degradation rate constants for ${\gamma}$- and ${\delta}$-tocopherols were higher than those for ${\alpha}$-tocopherol. The experimental activation energies of ${\alpha}$-, ${\gamma}$- and ${\delta}$- tocopherols were 2.51, 6.05 and 5.34 kcal/mole, respectively. The experimental activation energies for the oxidative degradation of ${\gamma}$- and ${\delta}$-tocopherols were higher than that of ${\alpha}$-tocopherol.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1370-1373
• /
• 2003

Specimens of Ti-10Ta-10Nb have been tested for Rockwall hardness after heating to either the $\alpha$+$\beta$ and $\beta$-phase field. And the specific heat and the dilatometer of Ti-10Ta-103Nb swaged have been measured. From the result, the $\beta$ transus of the alloy was determined to be 82$0^{\circ}C$. The hot deformation behavior of Ti-10Ta-10Nb with an $\alpha$+$\beta$ microstructure is modeled in the temperature 75$0^{\circ}C$ and strain rate range 0.001-10$^{-1}$