• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.621-626
• /
• 2010

In this study, imidazole-based ionic liquid on polystyrene was prepared and its catalytic performance in the cycloaddition of $CO_2$ with allyl glycidyl ether(AGE) to produce allyl glycidyl carbonate was investigated. The ionic liquid was generated on the polystyrene-based polymer through the immobilization of imidazole. The prepared catalyst was characterized using a number of instrumental analysis including EA, FT-IR, TGA and SEM. The immobilized ionic liquid showed very good catalytic activity for the cycloaddition of $CO_2$ with AGE, having 80% of AGE conversion with over 96% of the carbonate selectivity at $120^{\circ}C$ under 1.48 MPa $CO_2$ pressure. The immobilized ionic liquid can be used for the reaction up to four consecutive runs without significant loss of its catalytic activity.

• Clean Technology
• /
• v.14 no.3
• /
• pp.166-170
• /
• 2008

In this study, imidazolium salt ionic liquid on amorphous silica was prepared and its catalytic performance in the cycloaddition of $CO_2$ with allyl glycidyl ether (AGE) to produce heterocyclic carbonate was investigated. The ionic liquid was generated on chloropropyl functionalized silica through the immobilization of imidazole. The prepared catalyst was characterized using a number of instrumental analysis including XRD, BET, $^{29}Si$ MAS-NMR and SEM. $^{29}Si$ MAS-NMR showed that the ionic liquid formed adduct with the chloropropyl groups attached to the silica surface. The immobilized ionic liquid showed very good catalytic activity for the cycloaddition of $CO_2$ with AGE, showing 55-61% of AGE conversion with over 85% of the carbonate selectivity at $80-120^{\circ}C$. Its AGE conversion and selectivity to the carbonate were even higher than the homogeneous analog, 1-n-butyl-3-methyl imidazolium bromide (BMImBr).

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.86-91
• /
• 2007

Polydimethylsiloxane branched HEMA (SH) was Prepared by reacting polydimethylsilorane prepolymer and 2-hydroxyethyl methacrylate (HEMA). Polyacrylate modified Polyorganosiloxane (SMPA) was prepared by polymerization of methacrylic acid(MA), allyl glycidyl ether(AGE), aminopro- pyltrimethoxysilane (APTS), and SH. Their structures were confirmed by the measurement of FTIR and $^1H-NMR$ and thermal properties of SMPA were studied from TGA. Residual weight of SMPA at $400^{\circ}C$ increased according to increasing content of the APTS to 63 from 55%. SMPA sealant was prepared by adding additives, such as viscosity increasing agent, crosslinking agent, and fillers. Adhesion characteristics of SMPA-3 sealant was determined to be maximum load elongation, 2.01 %, and break load elongation, 2.28%. Adhesion characteristics for SMPA sealant prepared from SMPA-3 were better than those for SMPA sealant prepared from SMPA-1 and SMPA-2.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.1
• /
• pp.87-92
• /
• 2010

Silicone surfactants are widely used in many industrial area because of its thermal stability and lower foaming property. But it has limitation to expand the application because of migration and bubble generation issues when it is mixed with organic surfactant. In this study, epoxy functionalized fluoro-silicone surfactant, perfluoro glycidoxypropyl polyether siloxane(PFGES), was synthesized using hydrosilylation reaction among perfluoro methyl hydrogen siloxane, allyl glycidyl ether, and allyl ployether in order to get lower surface tension, better thermal stability than conventional silicone surfactant, and reactivity with anhydride function.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.1-2
• /
• 2003

While aromatic polyimides and polyamides have found widespread use as high performance polymers, the present work addressed the need for organosoluble materials through the use of a hyperbranching scheme. The $AB_2$ monomers were prepared. The $AB_2$ monomers were then polymerized via aromatic fluoride-displacement and Yamazaki reactions to afford the corresponding hydroxyl-terminated hyperbranched polyimides (HT-PAEKI) and amine-terminated hyperbranched polyamides, respectively. HT-FAEKI was then functionalized with allyl and propargyl bromides as well as epichlorohydrin to afford allyl-terminated AT-PAEKI, propargyl-terminated PT-PAEKI, and epoxy (glycidyl)-terminated ET-PAEKI, in that order. All hyperbranched poly(ether-ketone-imide)s were soluble in common organic solvents. AT-PAEKI was blended with a bisphenol-A-based bismaleimide (BFA-BMI) in various weight ratios. Thermal, rheological, and mechanical properties of these blend systems were evaluated. Two characteristic hyperbranched polyamides, which the one has para-electron donating groups to the surface amine groups and the other has para-electron withdrawing groups to the surface amine groups, were selected to compare BMI curing behaviors. The electron rich polymer displayed ordinary Michael addition type exothermic reaction, while electron deficient polymer did display unusual curing behaviors. Based on analytical data, the later system provided the strong evidences to support room temperature curing of BMI by reactive intermediates instead of reactive primary amine groups on the macromolecule surface.