• 한국산업보건학회지
• /
• 제26권4호
• /
• pp.445-453
• /
• 2016

Objectives: The objective of this study is to assess relative safety level of the decompression tables in Ministry of Employment and Labor Public Notice No. 2014-28 in comparison with overseas decompression tables. Methods: Decompression tables in the Public Notice No. 2014-28 were compared with examples from Japan, the USA, Canada, and France in terms of ascent rate, surface intervals after exceptional exposures, oxygen decompression and allowable partial pressure, depth limits in air diving, no-decompression limits, and decompression time and methods. Results: Public Notice No. 2014-28 does not include air diving depth limits, exceptional exposure limits, mandatory surface intervals after exceptional exposures, oxygen decompression, and surface decompression schedules. Its decompression time was found to be the shortest among the five decompression tables. Conclusions: Public Notice No. 2014-28 has the lowest safety level in comparison with overseas decompression tables. Deck decompression chambers are not applicable due to no regulations on surface interval and oxygen use in the chamber for decompression.

• 대한조선학회논문집
• /
• 제28권1호
• /
• pp.189-196
• /
• 1991

본 논문에서는 SWATH선의 횡 구조물에 신뢰성 해석법을 적용하였다. cross-structure와 strut의 윗부분에 있는 판부재를 선정하여 그 압축 최종강도에 대한 신뢰성해석을 수행하였고, 또한 cross-structure와 strut, sponson과 strut의 연결부에 대한 피로 신뢰성해석을 수행하였다. 피로손상의 허용수준의 설정에 대한 일례를 보여주었으며, 최종강도와 피로강도를 동시에 고려한 일종의 series system에 대한 신뢰성해석을 포함하였다. 이는 구조의 안전성 평가시 보다 정확한 결과를 얻을 수 있다는 점에서 바람직하다고 하겠다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.261-267
• /
• 2006

소요장치량은 컨테이너터미널의 장치능력을 결정짓는 매우 중요한 의사결정 변수이다. 일반적으로 소요장치량은 모선의 배선간격, 장치허용기간, 본선작업시간 등 여러 요인들에 좌우된다. 그러나 지금까지는 이들 요인이 확정적이라는 가정 하에 다양한 방법들을 소요장치량 산정에 적용해왔다. 본 연구는 본선작업 물량이 확률적인 것으로 가정하고 서비스수준을 만족시키는 소요장치량의 산정 방법을 제시했다. 시뮬레이션을 이용한 수치실험은 제시된 방법이 다른 방법들에 비해 확률적 상황에서 더욱 정확한 소요장치량을 산정할 수 있음을 보여주었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.435-440
• /
• 2006

The Reduced Vertical Separation Minimum (RVSM), which is the reduced minimum from 2,000 ft to 1,000 ft at flight levels (FL) between 290 and FL410 inclusive, was implemented in 30 September 2005 within the Japanese domestic airspace. Prior to the implementation, safety assessment for the airspace in assumed RVSM environments was carried out. Some model parameter values of collision risk model were estimated using flight plan (progress) data and radar data. An estimate of vertical collision risk including operational risk was calculated using these together with given parameter values. The results obtained from this analysis are as follows. (1) Contribution of the vertical collision risk for the crossing routes is about 9 percents of the total technical risk. (2) The estimate of the collision risk is $4.1{\times}10^{-9}$ [fatal accidents / flight hour] and the value is smaller than a maximum allowable level of collision risk, i.e. $5{\times}10^{-9}$ [fatal accidents / flight hour], called the Target Level of Safety.

• Steel and Composite Structures
• /
• 제33권3호
• /
• pp.389-402
• /
• 2019

Reinforced concrete walls and buckling restrained braces are effective structural elements that are used to resist seismic loads. In this paper, the behavior of the reinforced concrete walls coupled with buckling restrained braces is investigated. In such a system, there is not any conventional reinforced concrete coupling beam. The coupling action is provided only by buckling restrained braces that dissipate energy and also cause coupling forces in the wall piers. The studied structures are 10-, 20- and 30-story ones designed according to the ASCE, ACI-318 and AISC codes. Wall nonlinear model is then prepared using the fiber elements in PERFORM-3D software. The responses of the systems subjected to the forward directivity near-fault (NF) and ordinary far-fault (FF) ground motions at maximum considered earthquake (MCE) level are studied. The seismic responses of the structures corresponding to the inter-story drift demand, curvature ductility of wall piers, and coupling ratio of the walls are compared. On average, the results show that the inter-story drift ratio for the examined systems subjected to the far-fault events at MCE level is less than allowable value of 3%. Besides, incremental dynamic analysis is used to examine the considered systems. Results of studied systems show that, the taller the structures, the higher the probability of their collapse. Also, for a certain peak ground acceleration of 1 g, the probability of collapse under NF records is more than twice this probability under FF records.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2606-2613
• /
• 2022

Spent resin often exceeds radiation limits for safe disposal, creating a need for commercial-scale treatment techniques to reduce resin radioactivity. In this study, the radiological safety of a commercialized spent resin treatment device with a treatment capacity of 1 ton/day was evaluated. The results confirm that the device is radiologically safe in the event of an accident. This device desorbs ¹⁴C from the spent resin, allowing disposal as low-level waste instead of intermediate-level waste. The device also reduces overall waste by recycling the extracted ¹⁴C. Potential accident scenarios were explored to enable dose assessments for both internal and external exposure while preventing further spillage of the device and processing the spilled resin. The scenarios involved the development of a surface fracture on the resin mixture separator and microwave systems, which were operated under pressure and temperature of 0-6 bar and 0-150 ℃, respectively. In the case of accidents with separator and microwave device, the maximum allowable working time of worker were derived, respectively, considering external and internal exposures. When wearing the respirator corresponding to APF 50, in the case of the microwave device accident scenario, the radiological safety was confirmed when the maximum worker worked within 132.1 h.

• 한국정보처리학회논문지
• /
• 제2권4호
• /
• pp.561-566
• /
• 1995

동기식통신망에 장애가 발생하여 각 노드내의 클럭들이 서로 다른 주파수로 동작 되는 비정상적인 모드에서는 클럭간의 위상차가 급격하게 변화한다.야 그러므로 데이 터가 노드를 통하여 전송될 때 노드클럭간의 이러한 위상시간차를 보정하여 주기 위하 여 각 노드에서 포인터조정이 빈번하게 행하여지며 이 과정에서 비교적 높은 주파수의 지터가 발생한다. 포인터조정이 여러번 연속적으로 행하여지면 발생되는 지터는 축적 되어 그 크기가 점점 더 증가한다. 연속적으로 연결된 포인터조정시스템에서 발생되는 지터를 컴퓨터 시뮬레이션을 이용하여 분석하였으며 하드웨어 시뮬레이터에서 측정된 결과와 비교하였다.

• 한국산림과학회지
• /
• 제31권1호
• /
• pp.62-77
• /
• 1976

적정벌채량(適正伐採量)을 결정(決定)하는 일은 삼림경리(森林經理)의 주요임무(主要任務)라 할 수 있다. 그러므로 이제까지 많은 수확예정법(收穫豫定法)이 소개되었다. 그것들 중(中)에는 임업경영(林業經營)에 실제로 채용된 것도 있으나 대부분(大部分)의 방법(方法)들은 채용되지 않고 있다. 여기에서는 감단율법(減段率法)이라는 새로운 수확예정법(收穫豫定法)을 소개한다. 이 방법(方法)은 이론적(理論的)으로 흥미(興味)있고 실용성(實用性)있는 방법(方法)이라고 알려져 있다.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1087-1094
• /
• 2003

The piston slap phenomenon occurs when the piston collides with the internal wall of the cylinder. Impact force caused by piston slap is one of the major mechanical noise sources in reciprocating compressors. In response to public demand, strict regulations are increasingly being imposed on the allowable noise level which is caused mostly by household electric appliances. In this paper, forces acting on piston by considering the dynamic behavior of suction and discharge valves are analytically calculated and the piston slap caused by the piston secondary motion is investigated by the finite element method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.160-165
• /
• 2008

Kriging interpolation technique has been proposed by Danny Krige of South Africa to find the mineral distribution grade from information of geography and space. It is one of the generally used prediction technique for the mineral distribution grade and underground water level in wide scope also used in computer graphics fields by the ability for the surface regeneration This paper comprises two specific objectives. The first is to examine the applicability of Ordinary Kriging interpolation(OK) to finite element method that is based on variogram modeling in conjunction with different allowable limits of separation distance. The second is to investigate the accuracy according to theoretical variogram such as polynomial, Gauss, and spherical models.