• 대한화학회지
• /
• 제59권2호
• /
• pp.125-131
• /
• 2015

공기를 제거한 상태에서 0.5M HCl과 0.5M $H_2SO_4$ 용액에서 일어나는 니켈의 부식에 대하여 히스티딘 과 메티오닌의 부식억제 효과를 연구하였다. 각 경우에 니켈의 부식은 산화반응 속도가 감소되어 억제되었다. HCl 용액에서 니켈 표면에 일어나는 아미노산의 흡착은 수정된 Langmuir 흡착 등온식을 따르지만, $H_2SO_4$ 용액에서는 흡착된 분자들 간의 상호 작용에 영향을 받아 Temkin의 대수함수 등온식이 잘 적용되었다. HCl 용액에서 흡착되는 히스티딘의 경우만 히스티딘의 {$-NH{_3}{^+}$}, {$-NH^+=$}와 니켈 표면의 {$Ni-Cl^-$}사이의 정전기적 인력에 의해 물리흡착으로, 다른 경우는 Ni의 빈 d-orbital과 히스티딘 또는 메티오닌에 존재하는 비결합 전자쌍 사이에 화학흡착으로 설명할 수 있었다.

• 멤브레인
• /
• 제15권1호
• /
• pp.34-43
• /
• 2005

Poly(vinyl alcohol) (PVA)이 폴리술폰 한외여과 막, 술폰화된 폴리에테르술폰, 폴리아미드 나노 막 위에 코팅된 나노 복합막을 가압법에 의해서 제조되었다. PVA는 글루터알데하이드 수용액으로 가교되었다. 모든 지지층위에 PVA 희박용액이 성공적으로 코팅되어 나노복합막이 제조되었다. 지지막 위의 친수화도가 높아짐에 따라 수투과 유량이 증가하였다. 특히 음하전을 띠는 폴리아미드 나노 복합막의 제타전위는 PVA로 코팅함으로서 감소되었다. 막 오염 실험은 양이온을 띠는 계면활성제, 휴민산, 휴민산과 칼슘이온 복합체 및 bovine serum albumin을 사용하여 실행하였다. PVA로 코팅되지 않은 폴리아미드 나노복합막은 각각의 오염물질에 의해서 심하게 오염되었다. 휴민산과 단백질에 의한 오염은 오염물질의 등전점에서 가장 심하게 발생하였다. 휴민산에 이가 양이온을 첨가함으로서 오염이 심각하게 일어났다. PVA 수용액으로 폴리아미드 나노 복합막을 코팅함으로서 막 오염이 감소되었다. PVA로 코팅된 폴리아미드 나노 복합막은 산, 염기용액에 대해 저항성을 보였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권6호
• /
• pp.37-48
• /
• 2014

Lab scale rhizofiltration by using four plants was performed to investigate the uranium removal efficiency from groundwater. Lettuce (Lactuca sativa L.), Chinese cabbage (Brassica campestris L.), radish sprouts (Raphanus sativus L.) and buttercup (Oenanthe javanica) were cultivated during 3 weeks in the phytotron. Glass jar ($12cm{\times}12cm{\times}8cm$ for each), containing 350 ml of the artificially uranium contaminated solution was used for 72 hours of the rhizofiltration. In experiments with different initial uranium concentration ($18.00{\mu}g/L$, $31.00{\mu}g/L$, $84.00{\mu}g/L$ and $116.00{\mu}g/L$) in solution, more than 70% of the initial uranium were removed by using lettuce, Chinese cabbage and radish sprouts and the residual uranium concentration in solution maintained lower than USEPA water tolerance limit ($30{\mu}g/L$). From the rhizofiltration experiments at various pH conditions, the highest uranium removal for all four plants was acquired at pH 3 in solution. Rhizofiltration experiments testing two field samples of groundwaters having high uranium concentrations ($86.00{\mu}g/L$ and $173.00{\mu}g/L$) were duplicated and more than 83% of the initial uranium were removed from the groundwater within 72 hours of rhizofiltration by using radish sprouts, which, suggests that the rhizofiltration can be a useful process to remediate uranium contaminated groundwater in the field. After the rhizofiltration experiment, the SEM and EDS analyses for the root surface of the radish sprouts were conducted, suggesting that the main mechanism of the rhizofiltration for the removal of uranium from groundwater would be surface precipitation on the root surface of the plant.

• 대한수학교육학회지:수학교육학연구
• /
• 제17권1호
• /
• pp.67-90
• /
• 2007

본 연구의 목적은 문제해결의 결과로 나타나는 성공과 실패에 대한 학생들의 사고 과정을 유사성의 관점에서 이해하고자 하는 것이다. 따라서 사례연구 방법을 사용하여 정답을 제시한 학생들의 사고과정이 반드시 바람직하지 않을 수 있다는 의사(擬似) 분석적 사고와 분석적 사고에 대한 Vinner(1997a, 1997b)의 연구내용을 근거로 학생들의 사고과정을 분석하고자 하였다. 본 사례 연구 분석 결과, 학교 성적이 중상위권인 2명의 연구대상자들은 각각 의사(擬似) 분석적 사고와 분석적 사고를 함으로써 대수 문장제 해결에서 성공하거나 실패하였다. 학생들의 의사(擬似) 분석적 사고와 분석적 사고의 특징은 구조적 유사성의 구성에서 각 연구 대상자들이 인식한 해법 공식이 변형이 가능한 것인가의 여부와 해법을 적용하는 과정에서 학생 자신의 사고를 통제하거나 조절할 수 있는가의 여부에 따라 구분된다는 것이었다. 따라서 본 연구에서는 학생들이 해법으로 인식하는 공식의 형태가 어떠한 것이며, 그러한 해법을 어떻게 적용하는가를 유사성의 관점에서 문제 해결의 성공 여부와 관련하여 분석할 수 있었다.

• 한국건설관리학회논문집
• /
• 제12권4호
• /
• pp.50-58
• /
• 2011

린은 고객이 정하는 가치를 정의하고 가치의 흐름에 방해되는 불필요하고 낭비되는 요소를 없애는 과정을 기본으로 하는 경영철학이다. 생산관리에서 출발한 린이라는 경영철학은 건설 산업에서“린 건설”이라는 이름으로 건설단계에서 시작되었으며 이제는 생산성 향상을 효과적으로 이룰 수 있는 설계단계로의 확장이 필요한 시점이다. 현재 국내의 구조설계업무방식은 순차적 공학 개념의 Point-based Design 방식으로 설계자의 경험과 판단에 의존하여 초기 설계안을 결정하고 이후 상세설계를 진행하는 과정으로 설계업무가 진행되었다. 이에 반해 동시공학 개념의 Set-based Design 방식은 전체 프로젝트 관점에서 낭비요소를 없애고 프로젝트 생산성 향상을 위해 다양한 설계안을 제한된 범위 내에서 바로 선택하지 않고 더 확실한 정보가 나올 때까지 설계안의 선택을 유보하여 합리적이고 경제적인 설계안을 결정하는 린 기반의 설계 프로세스이다. 본 연구에서는 전통적인 구조설계방식에 대해 SBD방식을 도입하고, SBD프로세스의 의사결정기법으로 계층화분석법(AHP)을 적용하여, 후행업무단계들에 대한 사전 고려로 프로젝트 전체 관점에서의 낭비를 최소화하고 생산성을 향상할 수 있는 설계 방법론을 제안하고 하고자 한다. 이를 위해 PBD와 SBD방식에 대한 분석 및 의사결정방안을 모색하였고, 제안된 SBD프로세스의 사례연구를 통해 실무에서의 활용방안을 제시하였다.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.407-415
• /
• 2022

Surface coating of cathodes is an essential process for all-solid-state batteries (ASSBs) based on sulfide electrolytes as it efficiently suppresses interfacial reactions between oxide cathodes and sulfide electrolytes. Based on computational calculations, Li₃PO₄ has been suggested as a promising coating material because of its higher stability with sulfides and its optimal ionic conductivity. However, it has hardly been applied to the coating of ASSBs due to the absence of a suitable coating process, including the selection of source material that is compatible with ASSBs. In this study, polyphosphoric acid (PPA) and (NH₄)₂HPO₄ were used as source materials for preparing a Li₃PO₄ coating for ASSBs, and the properties of the coating layer and coated cathodes were compared. The Li₃PO₄ layer fabricated using the (NH₄)₂HPO₄ source was rough and inhomogeneous, which is not suitable for the protection of the cathodes. Moreover, the water-based coating solution with the (NH₄)₂HPO₄ source can deteriorate the electrochemical performance of high-Ni cathodes that are vulnerable to water. In contrast, when an alcohol-based solvent was used, the PPA source enabled the formation of a thin and homogeneous coating layer on the cathode surface. As a consequence, the ASSBs containing the Li₃PO₄-coated cathode prepared by the PPA source exhibited significantly enhanced discharge and rate capabilities compared to ASSBs containing a pristine cathode or Li₃PO₄-coated cathode prepared by the (NH₄)₂HPO₄ source.

• 한국재료학회지
• /
• 제14권3호
• /
• pp.229-234
• /
• 2004

All the applications of natural zeolites make use of one or more of their physical and chemical properties: adsorption, ion-exchange and related molecular sieve properties, dehydration and rehydration, and siliceous composition. Accordingly, the applications of zeolite have been carried out in the various aspects because of its large cation exchange capacity and adsorption properties. In this paper, the adsorption effect of heavy metal ions in wastewater on zeolite mineral by batch adsorption process is studied. The amounts of adsorbed ions were variable by original pH and ionic concentration, especially original pH of solution had an important effect on the adsorption. In case of low pH solution, e.g. below 3.0, clinoptilolite adsorbed $Pb^{2+}$ ,$ Cd ^{2+ }$ , $Cu^{2+}$ and $Zn^{ 2+}$ , but mordenite almost did not adsorb except $Pb^{2+}$ . Under the same conditions, these ions were more adsorbed on clinoptilolite than on mordenite mineral. The velocity of adsorption was relatively fast and it was confirmed by shaking test that the equilibrium of adsorption could be attained in about one hour. The species of exchangeable cation of zeolite had an effect on its removing ability and zeolite of the sodium-exchanged type was the best.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.424-429
• /
• 2014

YAG:$Ce^{3+}$ phosphor powders were synthesized using $Al(OH)_3$ seeds by means of a PVA-polymer-solution route. Various types of PVA with different molecular weights (different polymerization) were used. All dried precursor gels were calcined at $500^{\circ}C$ and then heated at $1500^{\circ}C$ in a mix of nitrogen and hydrogen gases. The final powders were characterized via XRD, SEM, PSA, PL, and PKG analyses. The phosphor properties and morphologies of the synthesized powders were dependent on the PVA type. As the molecular weight of the PVA was increased, the particle size gradually decreased with agglomeration, and the luminous intensity of the phosphor increased. However, the phosphor powder prepared from the PVA exhibiting very high molecular weight, showed a 531 nm (blue) shift from the 541 nm (yellow) wavelength of the YAG:$Ce^{3+}$ phosphor. Finally, the synthesized YAG:$Ce^{3+}$ phosphor powder prepared from the PVA with 89,000 - 98,000 molecular weight showed phosphor properties similar to those of a commercial phosphor powder, but without a post-treatment process.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.945-956
• /
• 1999

This work reports a set of approximate analytical solutions describing the initial transient process of close-contact melting between a rectangular parallelepiped solid and a flat plate on which either constant temperature or constant heat flux is imposed. Not only relative motion of the solid block tangential to the heating plate, but also the density difference between the solid and liquid phase is incorporated in the model. The thin film approximation reduces the force balance between the solid weight and liquid pressure, and the energy balance at the melting front into a simultaneous ordinary differential equation system. The normalized model equations admit compactly expressed analytical solutions which include the already approved two-dimensional solutions as a subset. In particular, the normalized liquid film thickness is independent of all pertinent parameters, thereby facilitating to define the transition period of close-contact melting. A unique behavior of the solid descending velocity due to the density difference is also resolved by the present solution. A new geometric function which alone represents the three-dimensional effect is introduced, and its properties are clarified. One of the representative results is that heat transfer is at least enhanced at the expense of the increase in friction as the cross-sectional shape deviates from the square under the same contact area.

• 한국세라믹학회지
• /
• 제35권4호
• /
• pp.319-324
• /
• 1998

Sol-gel derived phosphate water-sioluble glasses containing Cu were prepared. Powder-shape of glasses were added in D.I water used polyethylene bottle. After solution contained glass powder were submerged in water bath on 25$^{\circ}C$ their dissolution behavior/characteristics bactericidal effect and cytotoxicity test were evaluated. The maximum amount of Cu(35 mol%) via sol-gel method was more 5 mol% increased than that with melting process. The stage of total dissolution was more dominant than that of selective leaching dur-ing dissolution due to dissolved amount of glasses increased linearly with time. The ratio of Cu+ to {{{{ {Cu }^{2+ } }} was 3:7 so that the structure of glasses is more predominant 2-dimension chain structure than 3-dimenshion po-lymeric structue. The stage of total dissolution was more dominant than that of selective leaching during dissolution. Bactericidal effect against all bacteria showed that solutions which contained 40 ppm and 100 ppm of Cu killed 80 percentages of bacteria within 2 hours and 100 percentages of those within 12 hours. The results of cytotoxicity test for L929 cells showed no cytotoxicity were observed within 96 hours for dis-solved solution that contains 40 ppm and 100 ppm of Cu.