• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권9호
• /
• pp.3458-3481
• /
• 2021

Existing methods for blind identification of linear block codes without a candidate set are mainly built on the Gauss elimination process. However, the fault tolerance will fall short when the intercepted bit error rate (BER) is too high. To address this issue, we apply the reverse algebra approach and propose a novel "two-step-screening" algorithm by solving the linear error equations on the binary Galois field, or GF(2). In the first step, a recursive matrix partition is implemented to solve the system linear error equations where the coefficient matrix is constructed by the full codewords which come from the intercepted noisy bitstream. This process is repeated to derive all those possible parity-checks. In the second step, a check matrix constructed by the intercepted codewords is applied to find the correct parity-checks out of all possible parity-checks solutions. This novel "two-step-screening" algorithm can be used in different codes like Hamming codes, BCH codes, LDPC codes, and quasi-cyclic LDPC codes. The simulation results have shown that it can highly improve the fault tolerance ability compared to the existing Gauss elimination process-based algorithms.

• 수산해양기술연구
• /
• 제51권4호
• /
• pp.520-526
• /
• 2015

A tragic disaster happened by capsizing O-Ryong 501 trawler at Western Bering Sea in 1st, Dec. 2014. The disaster was caused by the severe weather and the long deferred escape from the storm in fully developed high sea. Lots of sea water from poop deck rushed into the fish ponder with fishes all together after hauling net and then remove the fishes from codend. The vessel became to incline to the one side caused by the weight and the free surface effect of flood sea waters and fishes at initial stage. In spite of crews all effort to discharge the waters, but the work was not achieved successfully. For the worse thing, the order of abandon ship was issued too late. After all, the ship capsized and sank, then almost crews became to the victims of the casualty including captain. In this paper, author carried out restrictively the calculation of dynamic factors influenced on the disaster including the weather condition and effects of the flood sea waters, and found out that the most important causes of the disaster were the decrease of stabilities, GM was decreased from 0.9m to 0.08 m, and the high waves which led to the vessel disaster.

• 오토저널
• /
• 제15권2호
• /
• pp.84-91
• /
• 1993

The dynamic behaviors of a launcher under impulsive forces are analyzed. All the components of the system, ie ; chassis, turret, cage and suspension parts, are modeled as rigid. The dynamic analysis code, which is developed with the formulae describing the system equations of motion in terms of relative quantities, is used to carry out the analysis. The results show the dynamic responses of chassis and cage when the driving constraints are imposed on turret and cage.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2004년도 추계 학술대회 논문집
• /
• pp.105-110
• /
• 2004

This study suggests a trial system for facility monitoring technology on ubiquitous environment. The trial system can be used for integrated various collection and sending data by bluetooth and wireless network from bridge. We used smart sensor and wireless network for it. Especially, we analyzed out all appliable technologies at monitoring part on ubiquitous environment and gave a standard spec to build the system. We wanted it as a guideline to apply ubiquitous in smart facility monitoring part.

• 환경영향평가
• /
• 제13권2호
• /
• pp.41-55
• /
• 2004

The purpose of this study is to consider for the introduction of the school eco-audit system as an educational method for sustainable development. First of all, the concept and objective of the education for sustainable development(ESD) are reviewed in order to advance a theory on school eco-audit system. ESD which under the premise of global inter and intra generation justice, resolves to address a mixture of ecological, economical and social aspects, as well as safeguarding limited resources and protecting the environment from pollution and energy. In order to effectively structure uncoordinated environmental activities carried out by schools, the introduction of school eco-audit system in Korea is suggested, which as the model for long-term development, has since been integrated into the school's programme. Activities related to waste, heating, electricity and water are run by a 'Management Team'. By combining all 3 fields of action - i.e. establishing basic organizational conditions, education, and individual ecological measures - the eco-audit proves to be the key to success. In particular, administration agency and method, institutional improvement are presented.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.73-76
• /
• 2000

A novel, continuous bioreactor system combining a bubble column (absorption section) and a two-phase bioreactor (degradation section) has been designed to treat a gas stream containing benzene. The bubble column contained hexadecane as an absorbent for benzene, and was systemically chosen considering physical, biological, environmental, operational and economic factors. This solvent has infinite solubility for benzene and very low volatility. After absorbing benzene in the bubble column, the hexadecane served as the organic phase of the two-phase partitioning bioreactor, transferring benzene into the aqueous phase where it was degraded by Alcaligenes xylosoxidans Y234. The hexadecane was then continuously recirculated back to the absorber section for the removal of additional benzene. All mass transfer and biodegradation characteristics in this system were investigated prior to operation of the integrated unit, and these included: the mass transfer rate of benzene in the absorption column, the mass transfer rate of benzene from the organic phase into the aqueous phase in the two-phase bioreactor, the stripping rate of benzene out of the two-phase bioreactor, etc. All of these parameters were incorporated into model equations, which were used to investigate the effects of operating conditions on the performance of the system. Several experiments were conducted to show the feasibility of this system. This process is believed to be very practical for the treatment of high concentrations of gaseous pollutants.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.484-487
• /
• 1997

The dicing is a process of gaining chip from a wafer. It is done by some mechanism to lengthwise and crosswise. Here, it is focused on measuring a depth of the wafer hefore a process of the dicing. First of all, it checks a precise outer position for the wafer on table to gain the chip. Second, the xafer should he lined after Imowing how much depth, it is in out of the outer position of the wafer. Here suggests that there are a composition of mechanical system, how to measure a depth out of scriber axis, a result from testing.

• 동의신경정신과학회지
• /
• 제7권1호
• /
• pp.39-48
• /
• 1996

This study was performed to investigate the effects of Qigong training after physical training stress in untrained college students For this study, 6 voluntary subjects(male 4, female 2) were chosen in untrained students of K University. they were trained by teachers during 6 weeks and tested just before Qingong training and after 6 weeks. Each subject was performed a treadmill exercise(model Q65, Quinton Co, U.S.A.) to the all-out state. During exercise stress test, electrocardiogram, heart rate were checked by stress test monitor(model Q4500, Quinton Co, U.S.A) and also oxygen uptake, maximal oxygen uptake analyzed continuously by automatic gas analysis(model QMC, Quinton Co, U.S.A). During physical training the serum were collected 3 times, pre-experimental rest time, and serum catecholamine were measured by HPLC.T-test of statistical analysis system was used in every experiment for statistical assessment. The results of T-test on these data were summarized as follow:1.Heart rate change during exercise stress test after Qigong training was shown more decreasing tendency than before training. Especially, heart rate change after Qigong training during resting periods was decreased significantly than before training.2. Oxygen uptake change during exercise stress test after Qigong training was shown more increasing tendency than before training, And also maximal oxygen uptake after Qigong training was shown more increasing tendency than before 6 weeks.3. Epinephrine level of after Qigong training was more decreased significantly than before training in all-out state. And norepinephrine level of after Qigong training was shown more decreasing tendency than before training in all-out state and after 30 minutes rest time. Above results indicate that Qigong training for 6 weeks could be effective to elevate the cardiopulmonary functions and diminish the stress responses of the physical stress.

• 에너지공학
• /
• 제26권4호
• /
• pp.23-28
• /
• 2017

Hazard evaluation and FTA are performed as the first and the second step of QRA for a LNG storage tank. Hazards are identified using HAZOP. Each segment of the system is examined, and we list all possible deviations from normal operating conditions and how they might occur. The consequences on the process are assessed, and the means available to detect and correct the deviations are reviewed. The FTA is carried out to analyse the hazards identified from the HAZOP study. A top event is selected to be release of LNG. Then all combinations of individual failures that can lead to the hazardous event are shown in the logical format of the fault tree system.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.160-170
• /
• 1997

The objective of this study is to investigate the atomization characteristics and the performance characteristics of a C. I. engine by using the changes of the injection nozzle type and the ultrasonic-energy-added system. In order to evaluate the effect of ultrasonic energy and of change of injection nozzle type in the performance characte- ristics of a diesel engine, measurements of droplet size of diesel fuel were carried out by using Malvern system. In all types of injection nozzles, SMD of the ultrasonic- energy -added diesel fuel was smaller than that of the conventional diesel fuel and the more injection pressure increased, the more SMD decreased. There was a small increase in SMD with the distance from injection nozzle under all conditions of the injection nozzle types. The minimum SMD was found in the injection nozzle of B type. In the diesel engine test, there were three results about the engine performance. Compared with the injection nozzle of A type, B type had excellent effects in the engine performance. The most excellent effects about the engine performance were obtained in the case of ultrasonic-energy-added diesel fuel. In addition, the torque diagram in the case of ultrasonic-energy-added diesel fuel was more stable and periodical than others.