• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.317-320
• /
• 2016

2011년 NH농협 전산망마비 사건, 2013년 3.20 사이버테러 및 2015년 12월의 한국수력원자력 원전 중요자료 유출사건이 있었다. 이러한 사이버테러는 해외(북한)에서 조직적이고 장기간의 걸친 고도화된 APT공격을 감행하여 발생한 사이버테러 사건이다. 하지만, 이러한 APT공격(Advanced Persistent Threat Attack)을 방어하기 위한 탁월한 방안 아직 마련되지 못했다. APT공격은 현재의 관제 방식으로는 방어하기가 힘들다. 따라서, 본 논문에서는 빅데이터 분석을 통해 APT공격을 예측할 수 있는 방안을 연구한다. 본 연구는 대한민국 3계층 보안관제 체계 중, 정보공유분석센터(ISAC)를 기준으로 하여 빅데이터 분석, APT공격 및 취약점 분석에 대해서 연구와 조사를 한다. 그리고 외부의 블랙리스트 IP 및 DNS Log를 이용한 APT공격 예측 방안의 설계 방법, 그리고 전조현상 분석 방법 및 APT 공격에 대한 대응방안에 대해 연구한다.

• 한국통신학회논문지
• /
• 제30권4A호
• /
• pp.350-357
• /
• 2005

근거리무선통신 (Dedicated Short Range Communication, DSRC)은 지능형교통시스템 서비스 제공을 위한 통신 수단으로, 수 미터에서 수백 미터인 근거리 영역의 노변장치(Road Side Equipment, RSE)와 차량탑재장치(On-Board Equipment, OBE)와의 양방향 고속통신을 수행하는 통신시스템이다. 본 논문에서는 SiGe HBT 공정을 이용하여 근거리무선통신 송신기용 5.8 GHz 상향믹서를 설계 및 제작하였다. 설계된 상향믹서는 믹서코어 회로와 더불어 IF/LO/RF 입출력 정합 회로, IF/LO 입력 발룬 회로와 RF 출력 발룬 회로가 단일칩으로 구현되었다. 제작된 상향믹서는 $2.7 mm\times1.6mm$의 크기를 가지며, 3.5 dB의 전력변환이득과 -12.5 dBm의 OIP3, 42 dB의 LO to E isolation, 38 dB의 LO to RF isolation, 3.0 V의 공급전압 하에서 29 mA의 전류소모로 측정되었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권1호
• /
• pp.95-102
• /
• 2018

This paper proposes a dual lifting and its cooperative control system with two different kinds of floating cranes. The Mega-erection and Giga-erection in the ship building are used to handle heavier and wider blocks and modules as ships and off-shore platforms are enlarged. However, there is no equipment to handle such Tera-blocks. In order to overcome the limit on performance of existing floating cranes, the dual lifting is proposed in this research. In the dual lifting, two floating cranes are well-coordinated to add up the lift capabilities of both cranes without any loss such that virtually a single crane is lifting, maneuvering and unloading. Two main constraints for the dual lifting are as follows: First, two barges of floating cranes should be constrained as a rigid body not to cause a relative motion between two barges and main hooks of the two cranes should be controlled as main hooks of a single crane. In order words, it is necessary to develop the cooperative control of two floating cranes in order to sustain a center of gravity of the module and minimize the tilting angle during the lifting and unloading by the two floating cranes. Two floating cranes are handled as a master-slave system. The master crane is able to gather information about all working conditions and make a decision to control the individual hook speed, which communicates the slave crane by TCP/IP. The developed control system has been embedded in the real floating crane systems and the dual lifting has been demonstrated five times at SHI shipyard in 2015. The moving angles of the lifting module are analyzed and verified to be suitable for hoisting control. It is verified that the dual lifting can be applied for many heavier and wider blocks and modules to shorten the construction time of ships and off-shore platforms.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권4호
• /
• pp.185-192
• /
• 2005

This paper proposes a DRMS(Distribution Remote Management System) which can enhance highly the economics of automatic metering system and the power quality supplied to the electric customer improving the efficiency of the meter reading, voltage management and load management work by realizing the remote meter reading, the remote voltage management and the remote load management based on the ADWHM(Advanced Digital Watt Hour Meter). The DRMS is designed so that the voltage management and load management work in remote site can be processed by collecting the voltage pattern and current pattern as well as watt hour data from all ADWHMs one time every month regularly or from special ADWHMS several time irregularly, A new on-line voltage and load management strategy based on the ADWHM is designed by analyzing the existing voltage management and load management process. Also, DRMS is designed so that watt-hour data, voltage pattern data, load pattern data and power factor data can be collected selectively according to the selection of user to assist effectively the methodology. Remote management program and database of the DRMS are implemented based on Visual C++, MFC and database library of MS. Also, DRMS is designed so as to communicate with the ADWHM using RS232C-TCP/IP converter and ADSL. The effectiveness of the remote metering function is proven by collecting and analyzing the data after ADWHMs installed in any site. The developed strategy and program also is verified through the simulation of voltage management and load management.

• 한국통신학회논문지
• /
• 제38B권9호
• /
• pp.707-714
• /
• 2013

사물인터넷(IoT) 기술은 M2M 통신의 확장 기술로 구성 장치(사물)들을 인터넷에 연결시켜 사물지능통신을 실체화하기 위해 제안되었다. IoT를 구성하는 다양한 사물들은 일반적으로 자원이 제한적이고, 이기종 장치들은 저용량 네트워크로 상호 연결된다. 이러한 IoT 환경에서 보안 서비스를 제공하기 위해서는 기밀성, 상호인증, 메시지 송신 인증 등이 제공되어야 한다. 그러나 자원이 제한적인 환경 특성상 기존 인터넷 환경에 적용했던 보안 기술들을 그대로 적용하기에는 무리가 있다. IETF 표준화 그룹에서는 안전한 IoT 서비스를 위해 경량화된 DTLS(Datagram TLS) 프로토콜의 적용을 제안하고 있지만 초경량 장치까지 모든 장치를 수용할 수는 없다. 이를 해결하기 위해 본 논문에서는 자원 제약의 이유로 해쉬 함수 혹은 암호 함수와 같은 단일 보안 모듈만을 탑재할 수 있는 경량화 장치들이 상호 인증하고 세션키를 합의할 수 있는 방안을 제안한다. 제안 기술은 세션키 생성 시 사전 계산 방식을 통해 성능을 향상시킬 수 있고 다양한 보안 공격에 대응 할 수 있다.

• 한국인쇄학회지
• /
• 제26권2호
• /
• pp.1-13
• /
• 2008

Printed mottle of coated paper is one of the most common phenomenon and the most difficult problem in offset printing. Offset printing is processed mainly processed by the attractive properties between water and oil, so all inks for off-printing must work with dampening solution(water). It may cause the emulsion on the printing nip from the printing pressure. This study aimed to investigate the effect of emulsified inks on print mottle from emulsified cyan ink by force with each different IP A contents. We measured the print mottle by densitometer and image analysis method. The emulsified inks also give effect to now properties of inks and it caused more ink transfer rate, however, it caused low density of inks. Moreover the emulsified inks were spreaded to around of dots and cause the thinning density on the non-printing area like print mottle. The results showed that the emulsified inks also cause scumming on the printing result with little mistake of adjusting dampening solution and mostly decreasing dot reproduction. So we could find out the obvious effect of emulsified inks to print mottle.

• 방송과미디어
• /
• 제18권1호
• /
• pp.89-104
• /
• 2013

다양한 스마트기기 간 및 앱(Application) 간 연동을 통한 스마트미디어 생태계 환경에서 애플(Apple), 구글(Google), 마이크로소프트(Microsoft) 등 SW(Software) 기반 OS(Operating System) 플랫폼들은 개별 체제 강화를 더욱 견고히 하고 있다. 생태계 내 타(他) 구성원들은 이들에 의한 제약이 더욱 심해지자, 웹 문서의 표준화(HTML5)나 클라우드 컴퓨팅(Cloud computing) 같은 개방화된 기술들을 환영한다. 실제로 최근 웹 애플리케이션(Web application) 개발과 개발자들의 OS 플랫폼 이탈은 이러한 변화의 단면을 보여주기 시작했다. 본 고는 SW 중심에서 서비스 중심으로 이동 중인 플랫폼 경쟁 환경에서 네트워크를 보유 중인 방송통신사업자들의 새로운 스마트미디어 전략 방향을 제시하는데 그 목적을 둔다. 이를 위해 두 가지 기술적 배경인 HTML5와 클라우드 컴퓨팅 기술들을 살펴본 후, 그 동안 SW 중심 플랫폼 경쟁 환경에서 주도권을 빼앗겼다고 깨달은 방송통신사업자가 취해야 할, 두 가지 새로운 기술적 환경에서의 스마트미디어 전략을 제시하였다. 분석 결과, HTML5가 모바일 분야의 핵심 기술이 될 전망이지만, 단기적으로는 여전히 미성숙 문제가 제기될 것으로 보이며, 기존 경쟁력을 유지하려는 OS 사업자들의 가치사슬 통합 전략이 가시화되고 있는 환경이 목격된다. 또한, 클라우드 서비스 제공도 이미 이들 OS사업자들의 기존 생태계 유지를 위한 핵심 툴로 이미 활용되기 시작했다. 그럼에도 불구하고 HTML5와 클라우드 컴퓨팅은 방송통신사업자들에게 생태계 주도권을 탈환할 수 있는 중요한 기술로 인식되고 있다. 따라서 본 연구에서는 이를 기반으로 세 가지 이용자 경험인 '경계 없는', '동질적인', '끊김 없는' 이용자 경험(User Experience) 제공을 위해 노력하는 선도적인 사례 탐색이 시도되었으며, 이를 통해 방송통신사업자들의 미래 스마트미디어 전략 방향이 도출되었다. '경계 없는' 서비스에서는 구글, 애플 외의 멀티OS 전략과 기존 OS의 앱 서비스 대항마인 아마존(Amazon), 페이스북(Facebook) 등과의 적극적 서비스 제휴, '동질적인' 서비스에서는 클라우드 기반 주요 콘텐츠 플랫폼 제휴와 방송통신 가입자 기반의 All-IP기반으로의 확대, 마지막으로 '끊김 없는' 서비스에서는 SNS, LBS, 가상현실 등과의 매쉬업(Mash-up)과 의료, 금융 등과의 융합서비스 개발을 통한 스마트홈 전략 추진, 인증 및 결제시스템의 개방화 등이 제시되었다.

• 한국항해항만학회지
• /
• 제41권5호
• /
• pp.353-358
• /
• 2017

This study aims to propose an assessment tool of port service quality (PSQ) in the context of container transport logistics (CTLs), by taking the perspectives from port users. The CTLs defined in this study are the relevant activities of serving the physical flows of a container box from a point of origin via a container port to a point of destination. To address the ports' role in collaboration between its channel members in CTLs, the PSQ measures for all port user groups (i.e. common PSQ measures) are selected based on the relevant CTLs activities involved by port, and its users within terminal/port area as well as throughout the CTLs chain. An importance-performance analysis (IPA) is applied as a diagnostic tool to analyse the status quo of Busan Port in CTLs contexts, by comparing the importance and performance (IP ) scores against each individual CTLs criterion. The findings from the IPA reveal that port managers and policy makers at the Busan Port should concentrate on six PSQ measures (i.e. SR1, SR4, ITS1, VAS1, VAS4, ICI3) to enhance PSQ in CTLs. However, four measures (i.e. ITS2, ITS3, ITS4, VAS2) are identified as a possible overkill, indicating an area of inefficiency where a remedial action of the cost-cutting decision is necessary. On the other hand, the Busan port shows an outstanding performance on four measures such as SR2, SR3, ICI1 and ICI2. The measures are not only important but also high performance. The study findings provide managerial guidance to port managers in Busan Port, in view of searching for managerial and operational strategies for sustainable port growth.

• 한국운동역학회지
• /
• 제22권4호
• /
• pp.429-435
• /
• 2012

The purpose of this study was to determine the biomechanical effect of wearing carbon nanotube-based insole on cushioning and muscle tuning during drop landing. Twenty male university students(age: $21.2{\pm}1.5yrs$, height: $175.4{\pm}4.7cm$, weight: $70.2{\pm}5.8kg$) who have no musculoskeletal disorder were recruited as the subjects. Average axial strain, average shear strain, inversion angle, linear velocity, angular velocity, vertical GRF and loading rate were determined for each trial. For each dependent variable, a one-way analysis of variance(ANOVA) with repeated measures was performed to test if significant difference existed among different three conditions(p<.05). The results showed that Average axial strain of line 4 was significantly less in CNT compared with EVA and PU during IP phase. The average shear strain was less in CNT compared with EVA and PU during other phases. The inversion angle was increased in CNT compared with EVA and PU during all phase. In linear velocity, angular velocity, vertical GRF and loading rate, there were no significant difference between the three groups. This result seems that fine particle of carbon nanotube couldn't make geometric form which can absolve impact force by increasing density through eliminating voids of forms. Thus, searching for methods that keep voids of forms may play a pivotal role in developing of insole. This has led to suggestions of the need for further biomechanical analysis to these factors.

• 한국운동역학회지
• /
• 제22권4호
• /
• pp.387-394
• /
• 2012

The purpose of this study was to compare and analyze the finger pressure and kinematic variables in the forehand hairpin net shot between skilled elite players and less skilled recreational players. Eight elite players(age: $18.1{\pm}0.8yrs$, height: $176.8{\pm}1.5cm$, weight: $640.9{\pm}48.6N$) with minimum of 6 years of experience and eight recreational players(age: $27.9{\pm}1.6yrs$, height: $177.1{\pm}6.1cm$, weight: $820.5{\pm}62.8N$) with less than one year experience were recruited in this study. For each trial being analyzed, four critical instants were identified from the video recordings: Right heel contact1 (E1), Right toe-off (E2), Right heel contact2 (E3), and Shuttlecock Impact (E4). Each hairpin net shot was broken into consecutive phases: E1~E2 (Right Landing Phase: RLP), E2~E3 (Sliding Step Phase: SSP), and E3~E4 (Impact Phase: IP). Temporal parameters, shuttlecock speed, linear and angular kinematics of body segments, and finger pressures were computed for this study. The results showed that The finger pressure of the ring finger and the middle finger for the skilled group during an impact had significantly greater than those of unskilled group. It is possible that all fingers were not used in the same manner when the racket was gripped in forehand hairpin. The result also suggested that the ring finger and the middle finger pushed the racket from top to bottom while having the mid-phalanx and proximal phalanx of index finger as an axis.