• 공업화학
• /
• 제10권7호
• /
• pp.1086-1091
• /
• 1999

$K_2O-MgO-Al_2O_3$의 3성분계로부터 $K^+-{\beta}/{\beta}"-Al_2O_3$를 직접 고상반응법에 의하여 합성하였다. 합성시 초기조성, 합성온도, 합성시간 및 분쇄매체가 ${\beta}/{\beta}"-Al_2O_3$ 상형성 및 상관계에 미치는 영향에 대하여 분석하였으며 최대 분율의 ${\beta}"-Al_2O_3$ 상형성을 위한 최적 합성조건을 연구하였다. 조성범위로서 $K_2O$와 $Al_2O_3$상형성의 몰비를 1:5에서 1:6.2로, 안정화제로 사용된 MgO는 4.2 wt % 에서 6.3 wt % 사이에서 변화시켰으며 합성온도는 $1000^{\circ}C$에서 $1500^{\circ}C$까지 취하였다. ${\beta}/{\beta}"-Al_2O_3$상은 ${\alpha}-Al_2O_3$와 $KAlO_2$가 결합하는 $1000^{\circ}C$ 부근에서 형성되기 시작하여 점차 증가하다가 $1200^{\circ}C$ 부근에서 ${\alpha}-Al_2O_3$가 모두 사라지면서 균일화되었다. ${\beta}"-Al_2O_3$ 상분율은 $K_{1.67}Mg_{0.67}Al_{10.33}O_{17}$의 조성과 함께 $1300^{\circ}C$ 부근에서 최대값을 보였다. $1300^{\circ}C$ 이상의 합성 온도에서는 높은 potassium의 증기압에 따른 $K_2O$의 손실에 의하여 ${\beta}"-Al_2O_3$ 상분율이 감소하였으며 합성시간은 5시간 정도가 적당하였다. 분쇄 및 혼합을 위한 분산매체로는 증류수보다는 아세톤의 효과가 뛰어났다.

• 생명과학회지
• /
• 제27권1호
• /
• pp.57-66
• /
• 2017

약용식물의 발효는 새로운 식품의 소재 개발이 가능하나, 발효 균주는 대부분 이스트, 유산균, 박테리아 등이 이용되고 있다. 본 연구에서는 감초와 번데기 단독 또는 감초에 발효원인 번데기를 20%와 50%로 첨가한 혼합물의 배지에 눈꽃 동충하초(Paecilomyces tenuipes)와 밀리타리스 동충하초(Cordyceps militaris)를 이용하여 고체배양방법을 확립하였다. 동충하초 발효물을 식품소재로 개발하기 위하여 식용 가능한 용매인 에탄올 95%, 70%, 50%, 25% 및 물로서 추출한 다음 동충하초로부터 생성된 cordycepin과 감초의 지표성분인 liquiritin, liquiritigenin과 glycirrhizin의 함량 및 NO생성 억제효과를 조사하였다. Cordycepin함량은 감초에 번데기를 50%로 혼합한 배지에 밀리타리스 동충하초 균주을 접종하여 발효한 발효물을 70% EtOH추출하였을 경우에 가장 많았으며, 번데기를 첨가하지 않은 밀리타리스 동충하초 발효물 추출물보다 함량이 33배 정도 증가하였다. 또한 추출용매의 극성이 70% EtOH보다 높거나 낮아지면 감소하는 경향이었으며, 특히 발효원으로서 번데기의 첨가는 cordycepin의 함량을 현저하게 증가시켰다. Liquiritin의 함량은 발효하지 않은 감초보다 눈꽃 동충하초와 밀리타리스 동충하초로 발효한 모든 추출물에서 감소하였다. Liquiritigenin의 함량은 눈꽃 동충하초로 발효한 추출물이 밀리타리스 동충하초 발효 추출물보다 현저히 증가하였으나, 밀리타리스 동충하초 균쥬의 발효 추출물은 발효하지 않은 감초 추출물과 거의 차이가 없었으며, 두 균주 모두 번데기의 첨가량이 증가할수록 liquiritigenin의 함량이 감소하는 경향이었다. 감초에 번데기의 첨가량 또는 추출 용매의 극성이 증가하면 liquiritin과 glycyrrhizin의 함량은 현저히 감소하였다. 이상의 결과로부터, cordycepin 함량은 C. militaris 균주로 liquiritigenin은 P. tenuipes로 발효시에 현저하게 증가하였으나, liquiritin과 glycyrrhizin은 감소하였다. 감초를 동충하초로 발효시에 번데기의 첨가는 주요 성분의 변화를 현저하게 유도하였다. 동충하초 발효 추출물은 NO생성 억제효과가 증가하였으며, 고극성 용매 추출물에서 그 효과가 현저하였다. 감초의 발효시에 생성된 cordycepin과 liquiritin, liquiritigenin 및 glycyrrhizin의 함량은 발효원으로서 첨가되는 번데기, 추출용매의 극성, 발효 균주의 종류 등에 따라서 현저한 차이가 있었다. 이러한 결과는 동충하초 균주를 이용한 기능성 식품 소재를 개발하기 위한 기초 자료로서 활용이 가능할 것으로 기대된다.

• 한국초지조사료학회지
• /
• 제37권4호
• /
• pp.290-300
• /
• 2017

본 연구에서는 주스박에 토착하고 있는 미생물을 분리하고 이를 발효에 이용하여 사료적 가치를 평가하고자 하였다. 주스박과 대두박을 원료로 하여 바실러스, 효모 그리고 유산균을 혼합 접종하여 수분 60%에서 고체발효 후의 pH변화, 총 균수의 변화와 같은 발효특성과 원료의 시간대별 일반성분의 변화를 확인하고자 하였다. 사과박, 당근박, 포도박, 감귤박에서 발효에 이용하기 위한 토착균주들을 분리, 동정하였으며 분리균 중 Lactobacillus plantarum, Weissella cibaria 및 Bacillus subtilis를 선택하여 농산부산물 고체발효에 이용하였다. 발효 주스박의 원료로는 사과박, 당근박, 포도박, 감귤박과 각 박을 동일비율로 혼합한 혼합박을 이용하여 5개의 시험구를 구성하였다. 위의 박들을 대두박과 2:3의 비율로 혼합하였으며 수분은 60%로 하여 발효 출발점에 바실러스, 12시간대에 효모 그리고 24시간에 유산균을 단계적으로 접종하여 $35^{\circ}C$에서 총 48시간 동안 발효하였다. 발효에 의한 pH변화는 발효 전후에서 사과박, 당근박, 포도박, 감귤박 그리고 혼합박에서 각각 $6.25{\rightarrow}4.47$, $6.23{\rightarrow}4.41$, $6.12{\rightarrow}4.66$, $5.49{\rightarrow}4.56$ 그리고 $5.45{\rightarrow}4.40$로 낮아지는 변화를 보였다. 발효 시간에 따른 생균수를 조사한 결과 발효 최초 접종시 초기 균수인 $10^7$에 비해 12, 24 그리고 48시간 발효 후에 모든 처리구에서 $10^8{\sim}10^9$로 증식되면서 발효가 지속적으로 진행되어 선별한 균주와 단계별 균주의 접종조건이 주스박을 발효함에 있어 적합한 것으로 판단되었다. 발효 초기인 12시간까지 젖산의 생성이 급격히 진행되었으며 사과박, 당근박, 포도박, 감귤박 그리고 혼합박에서 각각 632.40, 726.74, 674.29, 647.39 그리고 748.77 mMol/g으로 생성되었다. 발효 시간에 따른 건물함량은 초기 건물함량인 60%에서 12, 24시간 발효 후 당근박의 건물함량이 각각 54.84%, 56.66%로 다른 처리구들보다 유의적으로 높은 값을 보였으며(p<0.05), 포도박은 45.3%, 44.15%로 낮은 건물량을 보였다(p<0.05). 전반적으로 건물함량은 원물의 20%정도가 감소되었으며, 발효 시간에 따라서는 크게 변하지 않았다. 발효 시간대별 NDF는 발효 12시간째 모든 주스박에서 많은 감소를 보였으며 24시간부터 서서히 감소 또는 유지를 하였으며, 24시간대에는 포도박과 사과박이 가장 높은 경향을 보였다(p<0.10). ADF는 전반적으로 발효 시간에 따라 큰 변화를 보이지 않았으나, 사과박은 발효초기에 비해 12시간 때부터 급격히 감소하는 경향을 보였다 (p<0.10). 발효 시간에 따른 조회분은 쥬스박 별로 차이를 보이지 않았으나 (p<0.05), 전체적으로 감소되는 경향을 보였다. 주스박을 이용한 말용 사료를 개발하기 위해 사과박, 당근박, 포도박 그리고 말분변을 접종하였을 때 이들을 이용하는 우점 균주를 분리할 수 있었다. 이들 균주 중에서 발효에 유용하게 사용할 수 있는 바실러스와 유산균을 선별하였다. 바실러스, 효모 그리고 유산균을 3단계로 12시간 간격으로 각각 순서에 따라 접종하였다. 각 균주의 접종이후 12시간부터는 총 균수가 각각 $10^8$ 이상으로 유지하였다. 48시간 배양 후는 바실러스, 효모 그리고 유산균이 거의 균등하게 성장하였으며 이러한 주스박 발효물을 이용하여 말 사료로 이용하면 식품부산물을 사료자원으로 이용할 수 있을 뿐만 아니라 말을 위한 생균제의 급여로 말의 장내에서 유익한 균총의 유지에 도움이 될 수 있을 것으로 기대된다.

• 한국자기학회지
• /
• 제14권2호
• /
• pp.76-82
• /
• 2004

Brownmillerite 산화물 $Ca_{1-x}$Sr$_{x}$FeO$_{2.5}$ (x = 0, 0.3, 0.5, 0.7, 1.0)의 결정학적 및 자기적 성질을 알아보기 위해 x-선회절 분석법과 Mossbauer 분광법을 이용하였다. 먼저 적정 조성의 전구체(precursor)를 합성한 후 산소가 결핍된 분위기에서 열처리함으로서 여분의 산소가 제거된 다결정 시료분말을 얻었다. Rietveld방법을 사용한 x-선 분석 결과, 시료의 결정구조는 공간군 Pcmn(x = 0, 0.3), Icmm(x = 0.5, 0.7, 1.0)인 orthorhombic 구조를 가지며, Sr의 함량이 증가함에 따라 격자상수가 모두 증가하였다. Neel 온도(T$_{N}$)이하에서의 Mossbauer 스펙트럼은 조성에 관계없이 면적비 1:1인 날카로운 12선이 관측되었다. 분석 결과 이들은 팔면체 자리와 사면체 자리의 Fe 이온에 기인하며 각각 -0.3 mm/s와 0.4 mm/s 정도의 전기4중극자 분열 값을 갖는 것으로 나타났다. T$_{N}$ 이상에서의 Mossbauer 스펙트럼은 조성에 관계없이 1.6 mm/s 정도의 전기4중극자 분열 값을 갖는 이중선으로 나타났다. T$_{N}$은 Sr의 함량이 증가함에 따라 760K에서 710K까지 단조 감소하였다. 두 공명흡수선의 면적 비는 조성에 관계없이 거의 1:1로 나타났다. Debye온도 분석결과 Fe이온이 사면체자리에서 더 견고하게 결합되어 있음을 알았다.어 있음을 알았다.

• Korean Chemical Engineering Research
• /
• 제55권3호
• /
• pp.385-394
• /
• 2017

도계부산물인 닭털(CF)의 알칼리 및 산 가수분해물과 폼알데히드계 가교제를 혼합하여 조제한 접착제의 반응기작 및 경화특성을 조사하였다, 또한 이를 적용시켜 제조한 중밀도섬유판(MDF)의 물성 및 폼알데히드 방산량 측정 결과를 토대로 CF 접착제의 목질계 판상재 제조를 위한 분사형 접착제로서 적용 가능성을 확인하기 위하여 본 연구를 수행하였다. 고형분 함량이 40% 이상인 CF 접착제는 상온에서 점도가 높았으나, $50^{\circ}C$에서 측정한 점도는 $300{\sim}660m{\cdot}Pa{\cdot}s$로 측정되어 낮은 점도를 요구하는 분사형 접착제로 적용이 가능하였다. 적외선 분광기 분석을 통하여 폼알데히드계 가교제의 사용에 따른 methylol기의 부가 및 축합반응을 확인하였다. 시차주사 열량계 분석을 통하여 CF 접착제가 현재 목질계 판상재 제조에 사용되고 있는 요소수지(C-UF)와 비교하여 높은 열압온도 또는 긴 경화시간이 필요한 것으로 조사되었다. 5% NaOH 농도의 수용액에서 가수분해된 CF 가수분해물(이하 CF-AK-5%)과 formaldehyde/phenol 몰비가 2.5인 phenol-formaldehyde prepolymer (PF-2.5)로 조제한 접착제를 사용하고 8분간 열압하여 제조한 MDF에서 높은 휨강도(MOR)와 박리강도(IB)를 보였다. 또한 이 접착제로 제조한 MDF의 MOR과 IB는 대부분의 접착제 조제 및 열압 조건에서 C-UF로 제조한 MDF보다 높았다. 이 측정치를 KS 규격과 비교하였을 때, IB는 모든 조건에서 기준을 상회하였으나, MOR은 CF-AK-5%와 PF-2.5로 조제한 접착제를 사용하고 8분간 열압하여 제조한 MDF를 제외하고 그 기준을 만족하지 못하였으며, 24-TS도 모든 조건에서 기준을 만족하지 못하였다. 그러나 MDF 제조시 보드의 목표밀도를 높이거나 내수성 부여를 위하여 접착제에 첨가하는 wax emulsion의 양을 증가시킬 경우 MOR과 24-TS는 충분히 향상될 것으로 생각한다. 한편, MDF 제조에 있어 CF 접착제의 사용은 폼알데히드 방산량을 크게 감소시켰으며, 따라서 적절한 조건에서 조제된 CF 접착제는 목질계 판상재 제조를 위한 분사형 접착제로서 적용이 가능할 것으로 판단된다.

• 대한방사선치료학회지
• /
• 제25권2호
• /
• pp.115-121
• /
• 2013

목 적: 최신 선형가속기와 새로운 평가 장비를 도입하게 되어 이를 임상에 적용하기 위한 준비과정 중 몇 가지 문제가 발생하여 유용성을 확인하는 과정을 분석함으로써 앞으로 이 장비를 도입하는 기관에 도움이 되고자 한다. 대상 및 방법: 모든 측정은 TrueBEAM STX (Varian, USA)를 이용하였으며, 전산화치료계획장비(Eclipse ver 10.0.39, Varian, USA)를 이용하여 각 에너지 별, 조사조건 별 선량분포파일을 산출하였다. MapCHECK 2의 고유의 성능과 오차로 발생 할 수 있는 원인에 대하여 측정 및 분석하였다. MapCHECK 2의 성능 확인을 위해 6X, 6X-FFF (Flattening Filter Free), 10X, 10X-FFF, 15X의 에너지별로 필드사이즈 $10{\times}10$ cm, gantry $0^{\circ}$, $180^{\circ}$ 방향에서 측정을 하였다. 또한 기존 IGRT couch의 CT값이 volumetric dosimetry에 영향을 주는지 확인을 위해서, CT 넘버 값: -800 (Carbon) & -950 (COUCH안의 공기), -100 & -950을 지정해준 상태에서 6X-FFF, 15X의 에너지별로 필드사이즈 $10{\times}10$ cm, gantry $0^{\circ}$, $180^{\circ}$, $135^{\circ}$, $275^{\circ}$ 방향에서 측정을 하였고, MapPHAN에 할당된 HU 값 확인을 위해 Solid water phantom 3 cm을 위로 얹은 MapCHECK 2와 치료계획용 컴퓨터를 이용해 비교하였고, MapPHAN의 각진 모서리에 의한 측정오류문제, MapPHAN의 gantry 방향 의존성을 알아보기 위해 3가지 방법으로 측정 하였다. 세로로 세운 세팅 상태에서 6X-FFF, 15X를 GANTRY $90^{\circ}$, $270^{\circ}$ 방향에서 각각 측정하고, 가로로 세운 세팅상태에서 에너지 6X-FFF, 15X를 필드사이즈 $10{\times}10$ cm, $90^{\circ}$, $45^{\circ}$, $315^{\circ}$, $270^{\circ}$의 방향에서 각각 측정하였다. 세 번째로 빔의 세기조절을 하지 않은 상태에서 open arc를 조사하였다. 결 과: MapCHECK의 기본 성능을 확인, Couch에 의한 감약 측정, MAP-PHAN에 할당하는 HU값 측정, MapPHAN의 각진 모서리에 대한 계산 정확도 확인을 위한 측정에서 모두 유효한 범위에 들어와 측정오류에 영향을 미치지 않는 것을 확인 할 수 있었다. Gantry 방향의존성 확인하기 위한 3가지 방법 중 첫 번째로 측정기를 세운 상태에서의 값은 Gantry $270^{\circ}$ (상대적 $0^{\circ}$), $90^{\circ}$ (상대적 $180^{\circ}$)에서 6X-FFF, 15X에서 각각 -1.51, 0.83%와 -0.63, -0.22%를 나타내어 AP/PA 방향에 의한 영향이 없음을 나타냈다. 측정기를 가로로 세팅한 상태에서는 Gantry $90^{\circ}$, $270^{\circ}$에서 에너지 6X-FFF 4.37, 2.84%, 15X에서는 -9.63, -13.32%의 차이가 측정되어 gamma pass rate 3%의 값보다 큰 값을 나타내므로 MapPHAN에 의한 측방향 측정값이 유효범위 안에 들지 못하는 것을 확인 할 수 있었다. 마지막 Open Arc에서 6X-FFF, 15X 에너지를 필드사이즈 $10{\times}10$ cm에 $360^{\circ}$ 회전상태에서의 선량분포를 보면 pass rate가 90% 가까이 나오는 것을 확인 할 수 있다. 결 론: 위 결과를 토대로 MapPHAN은 상대등선량분포 감마값 측정에는 적합 하지만, 측방향 빔에 대한 gantry 방향의 의존성 때문에 절대선량은 정확한 측정을 할 수 없는 것으로 판단되어진다. 본 논문에서는 더욱 정확한 치료계획 확인을 위해서 VMAT 같은 회전조사시 측방향에 대한 오차를 줄이고 정확한 절대선량을 측정하기 위해서 MapCHEK 2와 IMF (Isocentric Mounting Fixture)의 조합을 사용하여 gantry 방향 의존성에 의한 영향을 최소화 할 수 있을 것이라 판단된다.

• 항공우주정책ㆍ법학회지
• /
• 제21권1호
• /
• pp.215-236
• /
• 2006

1979년에 제정된 '달조약'(Moon Treaty)이 5개의 우주관련조약중에서 중요한 부분을 차지하고 있음에도 불구하고 우주개발국가들에게 외면당하고 있고, 국내에서도 이를 다루는 문헌을 찾기 힘든 점을 고려해볼 때 달조약의 국제법과 우주법상 의미를 살펴보고 이를 전망해 보는데 이 논문의 의의가 있다고 할 수 있다. 따라서 이 논문에서는 우선 달조약의 주요내용을 설명하고 특히 1967년 '우주조약'(Space Traty)과의 관계를 분석한 후 달조약에 명시된 '인류공동유산'(Common Heritage of Mankind)개념이 국제법상 어떠한 의미를 가지는가를 살펴보았다. 아울러 달조약의 현재와 미래에 관하여 그리고 한국이 현재 달조약에 가입하고 있지 않은데, 달조약에 가입하는 것이 국익에 유리한가 하는 문제도 다루었다. 1979년 달조약은 1967년 우주조약과는 근본적으로 다른 입장을 취하고 있다. 1967년 우주조약의 경우에는 우주를 자유지역, 즉 공해(公海)와 같은 res extra commercium국제공역(國際公域)으로 파악하여 모든 국가가 자유롭게 탐사하고 이용할 수 있는 반면, 달조약은 우주를 '인류공동유산'으로 파악함으로써 마치 1982년 "UN해양법협약'에서 심해저 개발을 위한 국제심해저기구(International Sea-Bed Authority)가 제시되었듯이 달의 천연자원의 개발이 가능할 시기에 국제기구를 통하여 개발할 것을 예정하고 있다. 현재 국가들은 달에 관하여 그것의 천연자원이 배분문제를 다루는 국제기구를 설정할 정도로 가치있는 것인가에 관하여 확신을 갖고 있지 못하다. 실제로 달개발은 거의 30여년 동안 제자리 걸음에 그치고 있는데 만일 달에서 인간 생존에 필요한 물로 전환되는 얼음과 지구에 필요한 자원이 다량 발견된다면 자원개발과 우주기지건설을 위한 국가들의 경쟁은 치열할 것이고 마치 1982년 해양법협약 이전 심해저자원 개발의 상황이 예견될 것이다. 해양법상 심해저자원과 달조약상 달과 다른 천체의 천연자원은 바로 후자의 자원이 전자의 자원보다 아직 국가들에는 접근하기에는 너무나 멀리 있고 많은 재원과 기술이 필요하므로 심해저자원개발의 접근성을 우주자원개발과 같은 선상에서 판단할 수는 없는 것이다. 주목할 것은 현재 COPUOS내에서 달조약을 포함한 현행 우주관련 5개 조약은 1960-70년대에 채택된 것으로서 우주탐사 및 개발기술의 급격한 발전과 급증하는 우주의 상업적 이용추세에 비추어 그 현실성이 다소 뒤쳐지는 문제가 있다고 여러번 제기된 바 있는데, 1995년 멕시코대표가 비공식적인 협의과정에서 우주관련 5개조약의 지위검토를 법률소위원회에 의제로 포함시킬 것을 제의하여 1998년 제37차 법률 소위원회부터 정식으로 승인받아 현재까지 논의되고 있다는 것이다. 현재 한국의 우주개발 수준은 세계 20위권내에 들고 있으면서 달조약에 아직 가입하지 않고 있는데, 우리보다 우주산업이 발달한 프랑스가 달조약에 서명국이 된 점을 주목해야 한다. 달의 천연자원의 개발이 가능해질 시기에 국제제도를 수립해야 한다는 규정은 국제제도의 수립 전에는 자원개발을 금지하는 것을 의미하는 것이 아니므로 달조약에 가입하고 자원개발을 추구하는 방법도 좋을 듯하다. 오히려 달조약 제 11조 7항에서 동 자원으로부터 파생하는 이익을 모든 당사국에게 공펑하게 분배하되 달의 개발에 직접 또는 간접적으로 공헌한 국가의 노력은 물론 개발도상국의 이익과 필요에 대한 특별한 고려가 있어야 한다는 규정을 고려하면 달조약에 가입하고 달개발에 착수하는 방법이 국익에 도움이 될 것으로 생각한다. 또한 한국이 조만간 세계 10위권내 우주개발국을 희망한다면 우리가 먼저 달조약에 가입한 후 다른 국가들에게 달조약의 가입을 장려하는 것도 우주법과 국제법발전에 큰 기여를 하는 것이라고 생각한다.

• 대한환경공학회지
• /
• 제22권1호
• /
• pp.33-42
• /
• 2000

중금속은 토양 내에서 비보존성 화학물질로 작용하므로 흡착에 의해 지연효과가 발생할 수 있고 흡착은 pH에 영향을 받는다고 보고된 바 있다. 그러므로 토양 및 지하수 오염을 예방하고 복구하기 위해서는 다양한 pH조건에서 중금속의 이동형태를 파악하는 것이 중요한 연구과제가 된다. 본 연구에서는 사질토양에서 pH에 따른 중금속의 이동특성을 연구하기 위하여 배치실험과 주상실험올 수행하였다. 배치실험의 경우 초기농도별로 11가지의 $ZnCl_2$ 40 mL 용액과 사질토양 10g을 교반기에서 72시간 반응시켜 평형상태에 도달하게 한 후 용액을 채취하여 Zn, Ca, Mg의 세 가지 양이온을 ICP-AES로 분석하였다. 주상실험은 3가지 pH조건 (7.7, 5.8, 4.1)에서 10 g/L의 KCl과 $ZnCl_2$를 추적자로 사용하여 순간주입 (pulse injection) 형태로 토양시료 상부에 투입한 후 Time Domain Reflectometry (TDR)를 사용하여 10 cm 깊이에서 잔존수농도를, EC-meter와 ICP분석을 통하여 20 cm 깊이의 하부 경계면에서 침출수농도를 분석하였다. 배치실험 결과, Zn은 Ca, Mg와 이온교환의 형태로 흡착이 발생하였고 등온 흡착방정식의 각 모델 (Linear, Freundlich, Langmuir)별로 최저 1.2에서 최고 614.1의 지연계수를 나타냈다. 주상실험에서도 모든 pH조건에서 Zn이온이 이온교환을 하여 흡착이 발생하였으나, 잔존수와 침출수 형태의 파과곡선 모두에서 Zn이용의 첨두농도 도달시간이 K이온과 일치하여 지연효과는 발생하지 않은 것으로 나타났다. 이는 정상류 상태로 부과한 낮은 배경농도의 용탈수내에 Zn보다 강한 이온교환능을 가지는 원소가 존재하지 않아 Zn의 탈착이 발생하지 않았기 때문이다. pH가 낮을수록 Zn는 용액내 수소이온 ($H^+$)의 증가로 치환능이 감소하여 첨두농도가 높게 나타났고, 상대적으로 치환되는 Ca, Mg의 양은 줄어들었다. 따라서 본 연구에 적용된 배치실험과 주상실험의 조건하에서는 Zn이온이 이온교환반응에 의한 흡착이 발생하였으나 지연효과는 발생하지 않았고 가장 낮은 pH에서 첨두농도가 최고 12.7배까지 증가하였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.