• Journal of the Korean institute of surface engineering
• /
• v.28 no.1
• /
• pp.55-63
• /
• 1995

Alkaline solutions such as $NH_4$OH, choline and TMAH (($CH_3$)$_4$NOH) have been introduced in semiconductor wet processing of silicon wafers to control ionic and particulate impurities following etching in acidic solutions. These chemicals usually mixed with hydrogen peroxide and/or surfactants to control the etch rate of silicon. The highest etch rate was observed in $NH_4$OH solutions at a pH in alkaline solutions. It indicates that the etch rate depends on the content of $OH^{-}$ as well as cations of alkaline solutions. STM/AFM techniques were used to characterize the effect of alkaline solutions on silicon surface roughness. In SC1 (mixture of $NH_4$OH : $H_2$$O_2$ : $H_2$O) solutions, the reduction of the ammonium hydroxide proportion from 1 to 0.1 decreased the surface roughness ($R_{rms}$) from 6.4 to $0.8\AA$. The addition of $H_2$$O_2$ and surfactants to choline and TMAH reduced the values of $R_{p-v}$ and $R_{rms}$ significantly. $H_2$$_O2$ and surfactants added in alkaline solutions passivate bare silicon surfaces by the oxidation and adsorption, respectively. The passivation of surfaces in alkaline solutions resulted in lower etch rate of silicon thereby provided smoother surfaces.s.ces.s.

• Journal of Powder Materials
• /
• v.23 no.5
• /
• pp.372-378
• /
• 2016

This study focuses on the development of an alkaline leaching hydrometallurgy process for the recovery of tungsten from WC/Co hardmetal sludge, and an examination of the effect of the process parameters on tungsten recovery. The alkaline leaching hydrometallurgy process has four stages, i.e., oxidation of the sludge, leaching of tungsten by NaOH, refinement of the leaching solution, and precipitation of tungsten. The WC/Co hardmetal sludge oxide consists of $WO_3$ and $CoWO_4$. The leaching of tungsten is most affected by the leaching temperature, followed by the NaOH concentration and the leaching time. About 99% of tungsten in the WC/Co hardmetal sludge is leached at temperatures above $90^{\circ}C$ and a NaOH concentration above 15%. For refinement of the leaching solution, pH control of the solution using HCl is more effective than the addition of $Na_2S{\cdot}9H_2O$. The tungsten is precipitated as high-purity $H_2WO_4{\cdot}H_2O$ by pH control using HCl. With decreasing pH of the solution, the tungsten recovery rate increases and then decrease. About 93% of tungsten in the WC/Co hardmetal sludge is recovered by the alkaline leaching hydrometallurgy process.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.223-229
• /
• 1970

1. The preparation and some enzymatic properties of crude alkaline protease from a thermophilic mold, Myriococcum sp. was investigated. 2. Optimum pH for the hydrolysis of casein was 9.0 at $50^{\circ}C$ for 10 minutes. Optimum temperature was $55^{\circ}C$ at pH 9.0 for 10 minutes. The enzyme was highly stable at the range of pH 6.0 to 11.0 at $30^{\circ}C$ 3. The alkaline protease in the culture filterate was isolated two fractions by elution column chromatography on DEAE-Cellulose.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.9-17
• /
• 2001

The purpose of this study is to present basic data for the enzymatic modification of acetate fabrics. The weight loss and rate of weight loss of acetate fabrics increased with increasing NaOH concentration and treating time. Acetyl value decreased as the weight loss became higher. The weight loss of alkaline-treated acetate fabrics were directly proportional to the concentration and treating time of cellulase. The optimum temperature and pH in cellulase treatment were $55^\circ{C}$ and pH 3.5. The surface shape revealed that density of fiber decreased by alkaline-treatment. With the treating time of cellulase, fibrillation occurred. In case of higher weight loss in alkaline treatment, fibril is removed after 180 min. The tensile strength decreased by alkaline and cellulase treatment. Especially, in case of higher weight loss of alkaline treatment, tensile strength decreased suddenly. Alkaline treatment increased the drapability of acetates, while cellulase treatment increased it initially but decreased gradually with treatment time. The dyeability after alkaline treatment was improved for reactive dye, but deteriorated for disperse dye. The cellulase treatment of acetate lowered the dyeability for both types of dyes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.6
• /
• pp.337-342
• /
• 2007

The formation of lysinoalanine (LAL) in protein recovered from the belanger's croaker, Johnius grypotus, using a pH shifting process was measured by amino acid analysis. The LAL peak was detected at 49.24 min, between phenylalanine and histidine peaks in the amino acid analyzer. LAL was not detected in the fish muscle or in protein recovered using the alkaline pH shifting process. LAL was not formed in protein recovered after storage for up to 9 hrs at pH 11, but was detected in the soluble protein fraction at pH 11, followed heating at $90\;^{\circ}C$. The myosin heavy chain decreased with storage time at pH 11. The results suggest that the alkaline shifting process for recovering fish muscle protein is safe, and that no LAL forms.

• BMB Reports
• /
• v.30 no.4
• /
• pp.262-268
• /
• 1997

The thermophilic and thermostable alkaline phosphatase was purified to near homogeneity from the osmotic lysis of Thermus caldophilus GK24, The purified enzyme had an apparent molecular mass of 108, 000 Da and consisted of two subunits of 54,000 Da. lsoelectric-focusing analysis of the purified enzyme showed a pi of 7.3. The enzyme contained two Cys residues, and its amino acids composition was quite different from that of Thermus aquaticus YT-1 alkaline phosphatase and Escherichia coli alkaline phosphatase, The optimum pH and temperature of the enzyme were 11.0-11.5 and $80^{\circ}C$ respectively. The enzyme was stable in the pH range of 9.0-12.0 at $25^{\circ}C$ for 36 h. and the half-life at $80^{\circ}C$ (pH 11.0) was 6 h. The enzyme was activated by $MgCl_2$ and inhibited by EDTA. With ${\rho}-nitrophenyl\;phosphate\;({\rho}NPP)$ as the substrate, the enzyme had a Michaelis constant $(K_m) $of $3.6{\times}10^{-5}M$, The enzyme preferentially hydrolyzed the phosphomonoester bond of AMP in ribonucleotides and glycerophosphate.

• YAKHAK HOEJI
• /
• v.20 no.1
• /
• pp.76-82
• /
• 1976

The base-catalyzed hydrolysis of indomethacin over a range of pH 8,2 to 10.0 was investigated, according to the first order kinetic equation. The energy of activation for the reaction was calculated 20, 18 kcal/mole from the Arrhenius plot. And the optimal pH of indomethacin in aqueous solution was estimated as pH 4.93 by the extrapolation of the log k-pH profiles in strong acidic and alkaline regions. And the influences of alkaline earth metals, heavy metals and some other compounds on the degradation of indomethacin were observed with no effect.

• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.931-939
• /
• 2008

The objective of this study was to investigate the enolization reaction and the antioxidant activity of caramelization products (CPs) obtained by caramelization browning of glucose and fructose solutions prepared at a pH ranging from 7.0 to 12.0 at varying temperatures ($80-180^{\circ}C$). The degradation of sugars rapidly increased at a high alkaline pH (10.0-12.0), and fructose degraded more rapidly than glucose (p<0.05). As the pH increased, the degree of sugar enolization was higher in fructose than in glucose. Browning and the formation of intermediate degradation products increased with the increase in heating temperatures. The browning development was dependent upon the type of sugar, and it was generally higher at alkaline pH than at neutral pH. The reducing power and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity of the CPs increased with the increase in browning and formation of large amounts of intermediates. Therefore, the CPs with pronounced antioxidant activity can be prepared by heating fructose or glucose solutions that have a very alkaline pH to high temperatures.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.4
• /
• pp.378-386
• /
• 2009

A sequential optimization strategy, based on statistical experimental designs, is employed to enhance the production of alkaline protease by a Bacillus pseudofirmus local isolate. To screen the bioprocess parameters significantly influencing the alkaline protease activity, a 2-level Plackett-Burman design was applied. Among 15 variables tested, the pH, peptone, and incubation time were selected based on their high positive significant effect on the protease activity. A near-optimum medium formulation was then obtained that increased the protease yield by more than 5-fold. Thereafter, the response surface methodology(RSM) was adopted to acquire the best process conditions among the selected variables, where a 3-level Box-Behnken design was utilized to create a polynomial quadratic model correlating the relationship between the three variables and the protease activity. The optimal combination of the major medium constituents for alkaline protease production, evaluated using the nonlinear optimization algorithm of EXCEL-Solver, was as follows: pH of 9.5, 2% peptone, and incubation time of 60 h. The predicted optimum alkaline protease activity was 3,213 U/ml/min, which was 6.4 times the activity with the basal medium.

• The Korean Journal of Mycology
• /
• v.16 no.3
• /
• pp.135-143
• /
• 1988

The treatments of $H_2O_2$ were more effective on the degradation of difficult digestible materials by increasing the treatment concentration and adjusting the pH to alkaline. The smaller particle size of rice straw was, the more these effect. $2N_2CO_3{\cdot}3H_2O_2$, didn't need to adjust on pH, but the effect of treatment was lower than $H_2O_2$(pH 11.5) treatment. Lignin and hemicellulose content were decreased by the alkaline peroxide treatments. The fermentation of rice straw which pretreated with alkaline peroxide, the content of total nitrogen and ash increased. And NDF, hemicellulose and lignin were decreased, and ADF and cellulose decreased as the lower concentra­tion of treatment. The digestibility of rice straw which treated alkaline peroxide was increased with increasing the treatment concentration. The treatment of 12% $H_2O_2$(pH 11.5) and 12% $2Na_2^-CO_3{\cdot}3H_2O_2$ increased the digestibility from 31.1% to 89.4% and 76.8% compared with nontreated rice straw, respectively. The digestibility of fermented rice straw which pretreated with alkaline peroxide was effectively increased as the pretreatment concentration was low. Semi-dry treat­ment of $H_2O_2$ decreased the ADF and cellulose, and exhibited the 57.5% of digestjbility. Fer­mentation of rice straw which semi-dry treated with 4% $H_2O_2$, increased the digestibility from 33.4% to 63.4% compared with control.