• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.41-46
• /
• 2003

Flow-Accelerated Corrosion behavior concerning both activation and mass transfer process of SA106 Gr.C steel was studied using rotating cylinder electrode in room temperature alkaline solution by DC and AC electrochemical techniques. Passive film was tanned from pH 9.8 by step oxidation of ferrous product into hydroxyl compound. Corrosion potential shifted slightly upward with rotating velocity through the diffusion of cathodic species. Corrosion current density increased with rotating velocity in pH 6.98, while it soon saturated from 1000 rpm at above pH 9.8. On the other hand the limiting current increased with rotating speed regardless of pH values. It seems that activation process, which represents formation of passive film on the bare metal surface, controls the entire corrosion kinetics

• Nuclear Engineering and Technology
• /
• 제32권6호
• /
• pp.595-604
• /
• 2000

Flow-Accelerated Corrosion Behavior of SA106 Gr.C steel in room temperature alkaline solution simulating the CANDU primary water condition was studied using Rotating Cylinder Electrode. Systems of RCE were set up and electrochemical parameters were applied at various rotating speeds. Corrosion current density decreased up to pH 10.4 then it increased rapidly at higher pH. This is due to the increasing tendency of cathodic and anodic exchange half-cell current. Corrosion potential shifted slightly upward with rotating velocity. Passive film was formed from pH 9.8 by the mechanism of step oxidation and the subsequent precipitation of ferrous species into hydroxyl compound. Above pH 10.4, the film formation process was active and the film became stable. Corrosion current density showed increment in pH 6.98 with the rotating velocity, while it soon saturated from 1000 rpm above pH 9.8. This seems that activation process which represents formation of passive film on the bare metal surface controls the entire corrosion process

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.601-607
• /
• 2012

The alkali-activation reaction of two types of typical kaolin calcined at various lower temperatures was investigated at room temperature and at elevated temperatures. For the assessment of the reactivity, the temperature increase and the setting time of pastes prepared with calcined kaolin and sodium/potassium hydroxide solution were measured. Unlike raw kaolin, calcined kaolin samples prepared at various temperature showed an alkali-activation reaction according to the different aspects of the changes in the mineral phases. The reactivity with alkaline solutions was exceedingly activated in the samples calcined at $600-650^{\circ}C$, but the reactivity gradually decreased as the temperature increased in a higher temperature range, most likely due to the changes in the crystal structure of the dehydrated kaolin. The activation effect of the calcination treatment was achieved at reaction temperatures that exceeded $60^{\circ}C$ and was enhanced as the temperature increased. The reactivity of the calcined kaolin with an alkaline solution was more enhanced with the solution of a higher concentration and with a solution prepared from sodium hydroxide rather than potassium hydroxide.

• 한국염색가공학회지
• /
• 제14권4호
• /
• pp.214-222
• /
• 2002

In order to give a silk-like touch to PET fabrics, the PET fabrics were treated with NaOH alkaline solution in various conditions. In alkaline treatment, the liquor flow type pilot weight reduction apparatus with magnetostrictive ultrasonic transducer was used for the study. The weight loss of PET fabrics hydrolyzed in 4% and 6% NaOH solution, at $95^\circ{C}$ and $99^\circ{C}$ for 60min. with ultrasonic application showed 3.7~4.6% higher than that of treated fabric without ultrasonic application. From the difference of specific weight loss, the treatment condition of the maximum of hydrolyzation effect appeared at $95^\circ{C}$ in $4^\circ{C}$ and at $90^\circ{C}$ in 6% NaOH solution, respectively. During the alkali hydrolysis of PET fabrics, the decomposition rate constant(k) increased exponentially with the treatment temperature and were not related with ultrasonic cavitation. The activation energy$(E_a)$ in decomposition of PET fabrics were 21.06kcal/mol with ultrasonic application and 21.10kcal/mol without ultrasonic application. The ultrasonic application gave a little higher value of the activation entropy$(\Delta{S}^\neq)$ and a little lower value of Gibbs free energy$(\Delta{S}^\neq)$ compared with not used ultrasonic apparatus.

• Journal of Preventive Medicine and Public Health
• /
• 제16권1호
• /
• pp.25-30
• /
• 1983

This research is to examine the detoxication effect of methionine on cadmium intoxication For this purpose, this paper provides an analysis of the data on the groups of mice (ICR), one group of mice treated with 40 ppm of cadmium only. and other groups of mice combined-treated with cadmium and 0.1%, 0.25%, 0.5% and 1% methionine. After breeding for 40 days, the data on the growth of mice, changes in activation of alkaline phosphatase in blood, and the cadmium content in the liver and kidney, are analysed. The results were as follows: 1) The growth-rate of mice, in the cadmium only injected group, was declined by 9% in comparison with the control group after 40 days. But the two groups of cadmium with 0.5% and 1% methionine showed the rise of 9% ana 14% respectively above the growth-rate of the control group. The results from the groups of cadmium with 0.1% and 0.25%, methionine were similar to that from the cadmium only injected group. 3) Changes in activation of alkaline phosphatase in blood decreased to 86.45% in the cadmium only injected group behind the 100% activation of the control group. The groups of cadmium with 0.1% and 0.25% methionine showed no difference with the former group. But the groups of cadmium with 0.5% and 1% methionine recovered to the 93.14% and 96.08% of activation respectively. 3) The mean content of cadmium in the liver was $0.028{\pm}0.001{\mu}g/g$ in the control group. The cadmium only injected group showed the mean cadmium content of $2.80{\pm}0.62{\mu}g/g$ in the liver, which was similar to $2.82{\pm}1.03{\mu}g/g$ in the group of cadmium with 0.1% methionine, and $2.56{\pm}0.77{\mu}g/g$ in the group of cadmium with 0.25% methionine. But the groups of cadmium with 0.5% and 1% methionine showed the reduction of cadmium contents in the liver to $1.84{\pm}0.56{\mu}g/g$ and $1.74{\pm}0.35{\mu}g/g$ respectively. In the kidney, the groups of cadmium with 0.1%, 0.25% and 0.5% methionine shelved the similar cadmium content to the group treated with cadmium only. But the group of cadmium with 1% methionine showed a small increase to $4.13{\pm}1.00{\mu}g/g$ in comparison with the group treated with cadmium only. This analysis proves that the mobility and diffusion of cadmium in tile tissues advance faster ill the group treated with cadmium and methionine than in the group treated with cadmium only.

• 한국염색가공학회지
• /
• 제19권4호
• /
• pp.18-25
• /
• 2007

Kinetics and mechanism for alkaline hydrolysis of C. I. Disperse Green 9(G-9) of dinitrothiophene disperse dye were investigated. As soon as G-9 contacted with alkali, instant and continuous decreases of color strength of G-9 followed with increasing time. The hydrolysis rate of G-9 increased with increasing alkali, and it was found that alkali appeared first order dependence. The observed rate constants obtained from hydrolysis of various amount of dye were similar values, and calculation of initial rates showed that G-9 hydrolyzed by first order reaction for dye. Therefore it was confirmed that the overall reaction was second order, $SN_2$ of nucleophilic substitution reaction. Increasing temperature enhanced the hydrolysis of G-9. From the results of hydrolysis performed at various temperatures, it was obtained that activation energy(Ea) was 12.6 kcal/mole, enthalpy of reaction(${\triangle}H$) was 12.0 kcal/mole, and entropy of reaction(${\triangle}S$) was $29.8J/mol{\cdot}K$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.397-398
• /
• 2009

최근 알칼리 활성 콘크리트에 관한 연구가 활발히 진행되고 있는 실정이다. 본 연구에서는 여러 종류의 알칼리 활성화제가 플라이애시 기반 시멘트 ZERO 모르타르에 미치는 영향을 검토하였다.

• 약학회지
• /
• 제20권1호
• /
• pp.76-82
• /
• 1976

The base-catalyzed hydrolysis of indomethacin over a range of pH 8,2 to 10.0 was investigated, according to the first order kinetic equation. The energy of activation for the reaction was calculated 20, 18 kcal/mole from the Arrhenius plot. And the optimal pH of indomethacin in aqueous solution was estimated as pH 4.93 by the extrapolation of the log k-pH profiles in strong acidic and alkaline regions. And the influences of alkaline earth metals, heavy metals and some other compounds on the degradation of indomethacin were observed with no effect.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.328.1-328.1
• /
• 2002

A major lipid-signaling pathway in mammalian cells implicated the activation of sphingomyelinase (SMase), which hydrolyses sphingomyeline to generate ceramide and phosphocholine. Sphingomyelinase is divided into many isoform groups dependent on optimal pH, and essential cation especially magnesium in their activation. Such as acidic sphingomyelinase, neutral sphingomyelinase and alkaline sphingomyelinase. Ceramide is known as a crucial second messenger in cell responses like cell proliferation. cell cycle arrest. cellular senescence, and apoptosis. (omitted)

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.610-616
• /
• 2011

The effect of curing temperature on basic geopolymeric reactivity and hardening behaviour of blast furnace slag were investigated using the mixture of pulverized slag and several alkaline solutions of relatively high concentration. For the pastes prepared at several different temperatures between 20$^{\circ}C$ and 90$^{\circ}C$, setting time and heat of reaction were examined while mineralogical and morphological examinations were performed for the hardened paste after curing period at same temperature. The geopolymeric reaction of slag was revealed to be accelerated strongly according to the curing temperature regardless of the sort and concentration of the alkaline solution. The increase of concentration of the alkaline solution within 9M and the existence of silicic ion in the solution also promoted the reaction severely. The mineral component and their ratio of the hardened paste were revealed to be influenced by the chemical species and silicic ion contained in alkaline solution rather than by the curing temperature. The higher temperature and longer period of curing stage were effective for the sustained formation of geopolymer and succeed improvement of density and uniformity of morphology of the final hardened body.