• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.75-84
• /
• 2023

Many developing countries face challenges in estimating long-term discharge due to the lack of hydrological data for water supply planning, making it difficult to establish a rational water supply plan for decision-making on water distribution. The study area, the Bandung region in Indonesia, is experiencing rapid urbanization and population concentration, leading to a severe shortage of freshwater. The absence of water reservoir prediction methods has resulted in a water supply rate of approximately 20%. In this study, we aimed to propose an approach for predicting water reservoirs in developing countries by analyzing water safety and potential water supply using the MODSIM (Modified SIMYLD) network model. To assess the suitability of the MODSIM model, we applied the unit hydrograph method to calculate long-term discharge based on 19 years of discharge data (2002-2020) from the Pataruman observation station. The analysis confirmed alignment with the existing monthly optimal operation curve. The analysis of power plant capacity revealed a difference of approximately 0.30% to 0.50%, and the water intake safety at the Pataruman point showed 1.64% for Q95% flow and 0.47% for Q355 flow higher. Operational efficiency, compared to the existing reservoir optimal operation curve, was measured at around 1%, confirming the potential of using the MODSIM network model for water supply evaluation and the need for water supply facilities.

• Journal of Animal Science and Technology
• /
• v.49 no.5
• /
• pp.549-558
• /
• 2007

C4B and BAT2, assigned to the SLA class III region, were recently reported on relation with human diseases. The primers for RT-PCR and RACE-PCR for CDS analysis of these genes of pig were designed by aligning the CDSs of humans and mice from GenBank. After we amplified and sequenced with these primers and cDNAs, the full-length CDSs of pig were determined. The CDS lengths of C4B and BAT2 were shown as 5226 bp and 6501 bp. In addition, the identities of nucleotide sequences with human and mouse were 76% to 87%, and the identities of amino acids were 72% to 90%. After we carried out the alignment with determined CDSs in this study and pig genomic sequences from GenBank, the primers for cSNP detection in genome were designed in intron regions that flanked one or more exons. Then, we amplified and directly sequenced with genomic DNAs of six pig breeds. Four cSNPs from C4B and three 3 cSNPs from BAT2 were identified. In addition, amino acid substitution occurred in six cSNP positions except for C4248T of C4B. By the Multiplex-ARMS method, we genotyped seven cSNPs with DNA samples used for direct sequencing. We verified that this result was the same as that analyzed using direct sequencing. To demonstrate recrudescence, we performed both direct sequencing and Multiplex-ARMS on two randomly selected DNA samples. The genotype of each sample showed the same result from both methods. Therefore, seven cSNPs were identified from C4B and BAT2 and could be used as the basic data for haplotype analysis of SLA class III region. Moreover, the Multiplex-ARMS method should be powerful for genotyping of genes assigned to the whole SLA region for the xenograft study.

• Asia pacific journal of information systems
• /
• v.20 no.3
• /
• pp.191-204
• /
• 2010

Recently, the CO2 emission and energy consumption have become critical global issues to decide the future of nations. Especially, the spread of IT products and the increased use of internet and web applications result in the energy consumption and CO2 emission of IT industry though information technologies drive global economic growth. EU, the United States, Japan and other developed countries are using IT related environmental regulations such as WEEE(Waste Electrical and Electronic Equipment), RoHS(Restriction of the use of Certain Hazardous Substance), REACH(Registration, Evaluation, Authorization and Restriction of CHemicals) and EuP(Energy using Product), and have established systematic green business/IT strategies to enhance the competitiveness of IT industry. For example, the Japan government proposed the "Green IT initiative" for being compatible with economic growth and environmental protection. Not only energy saving technologies but energy saving systems have been developed for accomplishing sustainable development. Korea's CO2 emission and energy consumption continuously have grown at comparatively high rates. They are related to its industrial structure depending on high energy-consuming industries such as iron and steel Industry, automotive industry, shipbuilding industry, semiconductor industry, and so on. In particular, export proportion of IT manufacturing is quite high in Korea. For example, the global market share of the semiconductor such as DRAM was about 80% in 2008. Accordingly, Korea needs to establish a systematic strategy to respond to the global environmental regulations and to maintain competitiveness in the IT industry. However, green competitiveness of Korea ranked 11th among 15 major countries and R&D budget for green technology is not large enough to develop energy-saving technologies for infrastructure and value chain of low-carbon society though that grows at high rates. Moreover, there are no concrete action plans in Korea. This research aims to deduce the priorities of the Korean green business/IT strategies to use multi attribute weighted average method. We selected a panel of 19 experts who work at the green business related firms such as HP, IBM, Fujitsu and so on, and selected six assessment indices such as the urgency of the technology development, the technology gap between Korea and the developed countries, the effect of import substitution, the spillover effect of technology, the market growth, and the export potential of the package or stand-alone products by existing literature review. We submitted questionnaires at approximately weekly intervals to them for priorities of the green business/IT strategies. The strategies broadly classify as follows. The first strategy which consists of the green business/IT policy and standardization, process and performance management and IT industry and legislative alignment relates to government's role in the green economy. The second strategy relates to IT to support environment sustainability such as the travel and ways of working management, printer output and recycling, intelligent building, printer rationalization and collaboration and connectivity. The last strategy relates to green IT systems, services and usage such as the data center consolidation and energy management, hardware recycle decommission, server and storage virtualization, device power management, and service supplier management. All the questionnaires were assessed via a five-point Likert scale ranging from "very little" to "very large." Our findings show that the IT to support environment sustainability is prior to the other strategies. In detail, the green business /IT policy and standardization is the most important in the government's role. The strategies of intelligent building and the travel and ways of working management are prior to the others for supporting environment sustainability. Finally, the strategies for the data center consolidation and energy management and server and storage virtualization have the huge influence for green IT systems, services and usage This research results the following implications. The amount of energy consumption and CO2 emissions of IT equipment including electrical business equipment will need to be clearly indicated in order to manage the effect of green business/IT strategy. And it is necessary to develop tools that measure the performance of green business/IT by each step. Additionally, intelligent building could grow up in energy-saving, growth of low carbon and related industries together. It is necessary to expand the affect of virtualization though adjusting and controlling the relationship between the management teams.

• Korean Journal of Optics and Photonics
• /
• v.28 no.3
• /
• pp.108-115
• /
• 2017

We report the assembly procedure and performance evaluation of a visible and near-infrared spectrometer in the wavelength region of 400-900 nm, which is later to be combined with fore-optics (a telescope) to form a f/2.5 imaging spectrometer with a field of view of ${\pm}7.68^{\circ}$. The detector at the final image plane is a $640{\times}480$ charge-coupled device with a $24{\mu}m$ pixel size. The spectrometer is in an Offner relay configuration consisting of two concentric, spherical mirrors, the secondary of which is replaced by a convex grating mirror. A double-pass test method with an interferometer is often applied in the assembly process of precision optics, but was excluded from our study due to a large residual wavefront error (WFE) in optical design of 210 nm ($0.35{\lambda}$ at 600 nm) root-mean-square (RMS). This results in a single-path test method with a Shack-Hartmann sensor. The final assembly was tested to have a RMS WFE increase of less than 90 nm over the entire field of view, a keystone of 0.08 pixels, a smile of 1.13 pixels and a spectral resolution of 4.32 nm. During the procedure, we confirmed the validity of using a Shack-Hartmann wavefront sensor to monitor alignment in the assembly of an Offner-like spectrometer.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.60-68
• /
• 2005

The evaluation of malocclusion has to be done quantitatively and qualitatively. This will be lead toward an analysis of malocclusion severity as well as treatment difficulty. The method of proper evaluation of malocclusion severity and treatment difficulty is necessary to assess treatment effect and efficiency for the orthodontists and to establish fundamentals for planning and executing the health-related policies in private and public institutions. The purposes of this study as the first part of the objective and quantitative analysis of malocclusion were 1) to measure treatment difficulty based on the opinions of several orthodontists. and 2) to investigate the relationships between objective malocclusion severity and subjective treatment difficulty 100 pairs of dental casts that had various types and severity of malocclusion were selected from the orthodontic departments of Kyurghee University and Samsung Medical Center The objective malocclusion severity was measured with the PAR (Peer Assessment Rating) index and the subjective treatment difficulty was evaluated by 8 experienced orthodontists. The relationships between objective malocclusion severity and subjective treatment difficulty were statistically evaluated. There were significant relationships between objective malocclusion severity and subjective treatment difficulty especially in the measurements of the upper anterior alignment, the buccal occlusion. the overjet, the overbite and the midline discrepancy en the malocclusion components. The results of this study can provide the background knowledge to develop a new occlusal index. which contains both the malocclusion severity and treatment difficulty for Korean orthodontists.

• The Journal of Korean society of community based occupational therapy
• /
• v.4 no.1
• /
• pp.75-84
• /
• 2014

Objective : This study intends to suggest an effective clinical intervention method for stroke patients by applying a trunk stabilization training program to a single stroke patient and investigating and analyzing the effects of the program on postural control and activities of daily living. Methods : The subject of this study was a 75 year-old female stroke patient hospitalized in C Hospital located in Gyeongju, Gyeongsangbuk-do. As for the research design, A-B-A reversal design was used with a single subject design; and the research period was a total of five weeks from April 21, 2014 to May 23, 2014. As for the research process, a total of 15 sessions were carried out including three sessions of baseline(A), nine sessions of an intervention period(B), and three sessions of maintenance(A'); and the trunk stabilization program was applied during the intervention period. To evaluate the participant's postural control and activities of living life, the Postural Assessment Scale for Stroke(PASS) and the modified Barthel Index(MBI) were used. Visual analysis was used in which collected data were plotted on a graph, using Microsoft Office Excel 2013. Results : In the postural control test, the mean scores improved from 11.7 in the baseline phase to 14.8 in the intervention phase and 15.3 in the maintenance phase. In the evaluation of activities of daily living, the score improved from 66(medium dependence) during the baseline period to 80(low dependence) after intervention and at the maintenance phase. Conclusion : It was found that the trunk stabilization training program showed effects on the stroke patient's postural control or alignment, and furthermore a beneficial improvement in the patient's performing the activities of daily living, as well.

• Journal of Chest Surgery
• /
• v.39 no.5 s.262
• /
• pp.347-353
• /
• 2006

Background: Despite recent advances in surgical technique and perioperative care of total anomalous pulmonary venous return (TAPVR), post-repair pulmonary vein stenosis (PVS) remains as a serious complication. We thought that the most important factors of TAPVR repair to prevent PVS were good exposure, proper alignment, and sufficient stoma size. We analyzed our experience retrospectively. Material and Method: Between Jan. 1995 and Feb. 2005, we studied 74 patients diagnosed with TAPVR suitable for biventricular repair. Supra-cardiac type (n=41, 55.4%) was the most common. Mean CPB time, ACC time, and TCA (40.5%, 30/74) time were $92.1{\pm}25.9\;min,\;39.1{\pm}10.6\;min$, and $30.2{\pm}10.7\;min$, respectively. Mean follow-up duration was $41.4{\pm}29.1$ months and follow-up was possible in all patients. Result: The median age and body weight at operation were 28.5 days ($0{\sim}478$ days) and 3.4 kg $(1.4{\sim}9\;kg)$. Early mortality was 4.1% (3/74). Causes of death were pulmonary hypertensive crisis, sepsis, and sudden death. There was PR-PVS in 2 patients (early: 1, late: 1). Both patients were cardiac type TAPVR drained to coronary sinus. Re-operations were done but only one patient survived. Cumulative survival rate in 5 year and percent freedom from PVS were $94.5{\pm}2.7%\;and\;97.2{\pm}2.0%$, respectively. Conclusion: There was no PVS in patients who underwent extra-cardiac anatomosis between LA and CPVC. Therefore it could be said that our principle might be effective in preventing PR-PVS in patients suitable two-ventricle.

• The Korean Journal of Malacology
• /
• v.24 no.1
• /
• pp.73-80
• /
• 2008

Numerous morphological studies on N. samarangae have been well conducted over the last ten years. In this context, we have attemtped to do molecular phylogenetic analysis by using metallothionein (MT) gene from N. samarangae. To this end, we cloned the full length cDNA of MT from cDNA library of N. samarangae. The complete cDNA sequences were obtained from the expressed sequence tag (EST) sequencing project of N. samarangae, The coding region of 195 bp gives an amino acid sequence of 65 residues including methionine. There are 5' (61 bp) and 3' (48 bp) untranslated region at both ends of the Ns-MT cDNA sequence. The combined results from BLAST analyses, multiple sequence alignment and molecular phylogenetic study of Ns-MT cDNA indicate that N. samarangae has similarity to land snails such as Helix pomatia, Helix aspersa and Arianta arbustorum.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.215-222
• /
• 2015

In this work, we performed a proof-of-concept experiment for phase-contrast x-ray imaging (PCXI) based on a single antiscatter grid and a polychromatic x-ray source. We established a table-top setup which consists of a focused-linear grid having a strip density of 200 lines/inch, a microfocus x-ray tube having a focal-spot size of about $5{\mu}m$, and a CMOS-type flat-panel detector having a pixel size of $48{\mu}m$. By using our prototype PCXI system and the Fourier demodulation technique, we successfully obtained attenuation, scattering, and differential phase-contrast images of improved visibility from the raw images of several selected samples at x-ray tube conditions of $90kV_p$ and 0.1 mAs. Further, fusion image (e.g., the attenuation+the scattering) may have an advantage in displaying details of the sample's structures that are not clearly visible in the conventional attenuation image. Our experimental results indicate that single-grid-based approach seems a useful method for PCXI with great simplicity and minimal requirements on the setup alignment.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.43-61
• /
• 2004

Purpose : For qualify improvement in radiotherapy, it is important to set up and evaluate equipment (linac) accurately. In addition, technicians are needed to be fully aware of the equipment's detailed quality and its manual. Therefore, the result of ATP is evaluated and introduced, in order that the technicians are skilled by participating in quality assurance (QA) and understanding the quality of the equipment before clinical use. Method and Material : QA for LINAC 21EX (Varian, US) was done with suppliers its procedure was divided into radiation survey, mechanical test, radiation isocenter test, bean performance, dosimetry, and enhanced dynamic wedge and using X-omat film (Kodak), multidata, densitometer, and electrometer. QA of MLC (Millennium, 120 leaf) attached to LINAC and EPID (Portal vision) were done separately. Result : The leakage dose by survey meter was below the tolerance. In mechanical test, collimater, gantry, and couch rotation were less than 1mm, and the angles were ${\pm}0.1^{\circ}$ for digital and ${\pm}0.5^{\circ}$ for mechanical. The alignment test of the light field and crosshair were evaluated less than 1mm. The (a)symmetrical jaw field was less than ${\pm}0.5mm$. The radiation isocenter test using X-mat film was less than 1mm. The consistency of light field and radiation field was less than ${\pm}0.1mm$. PDD for photon energy was less than ${\pm}1\%$ and for electron energy of $90\%,\;80\%,\;50\%,\;and\;30\%$ were evaluated within the tolerance. Flatness for photon and electron energy was evaluated $2.3\%$ (tolerance $3\%$) and $3\%$ (tolerance $4.5\%$), respectively, and symmetry was $0.45\%$ (tolerance $2\%$) and $0.3\%$ (tolerance $2\%$), respectively. Dosimetry test for short term, MU setting, rep rate, and dose rate accuracy of photon and electron energy was within the tolerance depending on energy, MU, and gantry angle. Conclusion : Accuracy and safety for clinical use of Clinac 21EX was verified through customer acceptance procedure and the quality of the equipment was found out. These can reduce the difficulties in using the equipment. Furthermore, it is useful for clinically treatment of patients by technicians' active participations.