• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.220-224
• /
• 1999

Sliding wear test was employed to determine the effect of whisker content and orientation on the firiction and wear behavior of SiC whisker reinforced alumina. Composites containing unidirectionally oriented whiskers were prepared by a modified tape casting followed by lamination, binder removal and hot pressing in order to align the whiskers in the tape casting direction. Wear coefficients on three directions were measured; parallel and normal to the tape casting direction on the tape casting surface and normal to lamination direction on surfnce normal to the tape casting direction. In the effect of whisker orientation, the highest wear rate was obtained in the direction parallel tape casting direction and the lowest in the direction normal to lamination direction at all temperatures. Silicon oxide layer amoothing the surface was detected by energy dispersive X-ray analysis on the worn surface.

• 한국소음진동공학회논문집
• /
• 제19권8호
• /
• pp.838-842
• /
• 2009

Vibrational analysis is presented for a visual alignment system of nano-imprint process in this study. For a nano-imprinting equipment, the visual alignment system is one of the essential parts in order to align the mold into the target panel. For the precision alignment, the vibration from inside and outside of the vision system should be avoided, and the elimination of the vibration should be considered in the design process of the visual alignment design. In this work, vibrational characteristics for the vision system frame is analyzed and topology optimization of a frame section area is carried out. With the results of the analysis, a new frame design are suggested. Design consideration for constructing a visual alignment system in view of optimal design is also discussed.

• 제어로봇시스템학회논문지
• /
• 제17권11호
• /
• pp.1159-1167
• /
• 2011

A novel 3D tube scanning technique is proposed. The proposed tube scanning technique is developed for a special tube inspection module which consists of four line-lasers and one camera. Using the scanning module, we can reconstruct the 360 degree shapes of the inner surfaces of a cylindrical tube. From an image frame captured by the camera, we reconstruct a partial tube model based on four laser triangulations. Then by aligning such partial models with respect to a reference tube axis, a complete 3D shape of the tube is reconstructed. The tube axis in each reconstructed frame is aligned with a 3D Euclidean transformation to the reference axis. Several experiments show that the proposed method can align multiple tube axes very accurately and reconstruct 3D shapes of a tube with very low shape distortion.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권2호
• /
• pp.540-546
• /
• 2014

Recently a new government has announced an action plan known as the government 3.0, which aims to provide customized services for individual people, generate more jobs and support creative economy. Leading on from previous similar initiatives, the new scheme seeks to focus on open, share, communicate, and collaborate. In promoting Government 3.0, the crucial factor might be how to align the core services and policies of Government 3.0 with correspoding technologies. The paper describes the concepts and features of Government 3.0, identifies emerging Internet-based technologies and services toward the initiative, and finally provides improvement plans for Government 3.0. As a result, 10 issues to be brought together include: Smart Phone Applications and Service, Mobile Internet Computing and Application, Wireless and Sensor Network, Security & Privacy in Internet, Energy-efficient Computing & Smart Grid, Multimedia & Image Processing, Data Mining and Big Data, Software Engineering, Internet Business related Policy, and Management of Internet Application.

• 대한기계학회논문집A
• /
• 제31권10호
• /
• pp.993-998
• /
• 2007

To verify the 2D or 3D positioning accuracy of a multi-axes stage is not easy, particularly, in the case the moving path of the stage is not linear. This paper is a study on a measuring method for the curved path accurately. A machine vision technique is used to trace the moving path of two-axes stage. To improve the accuracy of machine vision, a zoom lens is used for the 2D micro moving path. The accuracy of this method depends of the CCD resolution and array align accuracy with the zoom lens system. Also, a further study for software algorithm is required to increase the tracing speed. This technique will be useful to trace a small object in the 2D micro path in real-time accurately.

• ETRI Journal
• /
• 제29권3호
• /
• pp.305-310
• /
• 2007

If a virtual object in a virtual environment represented by a stereo vision system could be touched by a user with some tactile feeling on his/her fingertip, the sense of reality would be heightened. To create a visual impression as if the user were directly pointing to a desired point on a virtual object with his/her own finger, we need to align virtual space coordinates and physical space coordinates. Also, if there is no tactile feeling when the user touches a virtual object, the virtual object would seem to be a ghost. Therefore, a haptic interface device is required to give some tactile sensation to the user. We have constructed such a human-computer interaction system in the form of a simple virtual reality game using a stereo vision system, a vibro-tactile device module, and two position/orientation sensors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1668-1671
• /
• 2003

A novel dual-frequency microstrip printed-dipole antenna operating at 5 GHz and 10 GHz is presented. This antenna is designed for wireless and mobile communication. The balance step coplanar strip is used to be a transmission line at the center of dipole with matching impedance at 50 ohm. Using the conductor strip align on the other side of antenna and adjust the width of step coplanar strip line to improved input impedance matching. By modification for matching impedance of dual frequency antenna are not affected to the radiation patterns. The Finite Difference Time Domain (FDTD) technique is applying to analyze the basic characteristic properties such as $S_{11}$ , input impedance , VSWR and radiation patterns. And these parameters are discussed. The analyze problem space are $51{\times}197{\times}175$ cells and cell dimension are ${\Delta}x=0.3\;mm$ and ${\Delta}y={\Delta}z=0.15\;mm$.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.76-90
• /
• 1994

In this paper, an efficient algorithm is proposed which recognizes the mixed document consisting of the printed Korean/alphanumeric texts and graphic images. In the preprocessing step an input document is aligned if necessary by rotating it. We obtain the rotation angle using the Hough transform and align the input document horizontally. Then we separate graphic image parts from text parts by considering chain codes of connected components. We further separate each character using vertical and horizontal projections. In the recognition step Korean and alphanumeric characters are classified and each of them is recognized hierarchically using several features. In summary an efficient recognition algorithm for mixed documents is proposed and its performance is demonstrated via computer simulations.

• 한국전기전자재료학회논문지
• /
• 제33권1호
• /
• pp.21-24
• /
• 2020

We investigated a solution-driven Yttrium Tin Oxide (YSnO) film that was imprinted using a parallel nanostructure as a liquid crystal (LC) alignment layer. The imprinting process was conducted at the annealing temperature of 100℃. To evaluate the effect of this process, we conducted surface analyses including atomic force microscopy (AFM). During imprinting, the surface roughness was reduced, and anisotropic characteristics were observed. Planar LC alignment was observed at a pretilt angle of 0.22° on YSnO film. Surface anisotropy induced by imprinting method forces LC to align along the direction of the parallel nanostructure, which is an alternative to conventional polyimide treated using a rubbing process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1229-1232
• /
• 2004

The ratio of optimized concentration on optical characteristics for phase-separated composite organic films (PSCOF) liquid crystal display is 30% of pre-polymer (NOA65) and 70% of ferroelectric liquid crystal (Felix). The layer structure in ferroelectric liquid crystal cell made by 30% NOA65 and 70% Felix materials is tilt-bookshelf layer structure. The angle of tilt-bookshelf structure are 17$^{\circ}$, 12$^{\circ}$ which are almost same of tilt angle of ferroelectric liquid crystal in Sm $C^{\ast}$ phase. We know that this result is from compensating the layer buckling. In this paper, we will discuss the effect of layer structure in PSCOF cell on ratio of concentration between pre-polymer and liquid crystal by x-ray measurements. We believe that technology of PSCOF is a good solution to solve the problems of align-defect and mechanical shock for future TV application and plastic LCD.