• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.78-91
• /
• 2002

In the thermal power plant, there are six manipulated variables: main steam flow, feedwater flow, fuel flow, air flow, spray flow, and gas recirculation flow. There are five controlled variables: generator output, main steam pressure, main steam temperature, exhaust gas density, and reheater steam temperature. Therefore, the thermal power plant control system is a multinput and output system. In the control system, the main steam temperature is typically regulated by the fuel flow rate and the spray flow rate, and the reheater steam temperature is regulated by the gas recirculation flow rate. However, strict control of the steam temperature must be maintained to avoid thermal stress. Maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature versus changes in fuel flow rate, difficulty of control of the main steam temperature control and the reheater steam temperature control system owing to the dynamic response characteristics of changes in steam temperature and the reheater steam temperature, and the fluctuation of inner fluid water and steam flow rates during the load-following operation. Up to the present time, the Proportional-Integral-Derivative Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on the characteristic comparison of the PID controller and the modified 2-DOF PID Controller (Two-Degrees-Freedom Proportional-Integral-Derivative) on the DCS (Distributed Control System). The method is to design an optimal controller that can be operated on the thermal generating plant in Seoul, Korea. The modified 2-DOF PID controller is designed to enable parameters to fit into the thermal plant during disturbances. To attain an optimal control method, transfer function and operating data from start-up, running, and stop procedures of the thermal plant have been acquired. Through this research, the stable range of a 2-DOF parameter for only this system could be found for the start-up procedure and this parameter could be used for the tuning problem. Also, this paper addressed whether an intelligent tuning method based on immune network algorithms can be used effectively in tuning these controllers.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.159-165
• /
• 2010

In this paper the TRMS (Tilting Rolling-stock Maintenance System) that applies the concept of RAM (Reliability, Availability, and Maintainability) and RCM (Reliability Centered Maintenance) to Preventive and Corrective Maintenance Policy for TTX (Tilting Train Express) will be discussed. We will briefly introduce the RCM concepts and discus show these concepts and procedures are implemented in the TRMS S/W. In the TRMS S/W there are four modules, System and Operations Information Module, FMECA(Failure Modes, Effects, and Criticality Analysis)module, RAM Information Module, and RCM Analysis Module. The System and Operations Information Module provides the user interface for collection of systems and operations related data and the FMECA module provides a groundwork for the RCM analysis. The algorithms to calculate the reliability and failure rate for Weibull distribution and formulae to calculate the task intervals and task costs are proposed in the RAM and RCM Analysis Module respectively. There is a good possibility of applying RCM to other rolling stock maintenance systems if the benefit that RCM can brings to the maintenance world is fully recognized.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.6
• /
• pp.463-470
• /
• 2022

Intravenous injection is widely used for patient treatment, including injection drugs, fluids, parenteral nutrition, and blood products, and is the most frequently performed invasive treatment for inpatients, including blood collection, peripheral catheter insertion, and other IV therapy, and more than 1 billion cases per year. Intravenous injection is one of the difficult procedures performed only by experienced nurses who have been trained in intravenous injection, and failure can lead to thrombosis and hematoma or nerve damage to the vein. Nurses who frequently perform intravenous injections may also make mistakes because it is not easy to detect veins due to factors such as obesity, skin color, and age. Accordingly, studies on auxiliary equipment capable of visualizing the venous structure of the back of the hand or arm have been published to reduce mistakes during intravenous injection. This paper is about the development of venous detection equipment that visualizes venous structure during intravenous injection, and the optimal combination was selected by comparing the brightness of acquired images according to the combination of near-infrared (NIR) LED and Filter with different wavelength bands. In addition, an image processing algorithm was derived to threshehold and making blood vessel part to green through grayscale conversion, histogram equilzation, and sharpening filters for clarity of vein images obtained through the implemented venous detection experimental module.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.239-261
• /
• 2001

A large suite of official statistical data sets has been compiled for geographical units under the national directives, and it is the quantitative regional analysis procedures that could add values to them. This paper reports our attempts at prototyping a statistical GIS which is capable of serving over the Web a variety of regional analysis routines as well as value-added statistics and maps. A pilot database of some major statistical data was ingested for the city of Seoul. The baseline subset of regional analysis methods of practical usage was selected and accommodated into the business logic of the target system, which ranges from descriptive statistics, regional structure/inequality measures, spatial ANOVA, spatial (auto) correlation to regression and residual analysis. The leading-edge information technologies including the application server were adopted in the system design and implementation so that the database, analysis modules and analytic mapping components may cooperate seamlessly behind the Web front-end. The prototyped system supports tables, maps, and files of downloadable format for input and output of the analyses. One of the most salient features of out proposed system is that both the database and analysis modules are extensible via the bi-directional interface for end users; The system provides users with operators and parsers for algebraic formulae such that the stored statistical variables may be transformed and combined into the newly-derived set of variables. This functionality eventually leads to on-the-fly fabrication of user-defined regional analysis algorithms. The stored dataset may also be temporarily augmented by user-uploaded dataset; The extension of this form, in essence, results in a virtual database which awaits for users commands as usual. An initial evaluation of the proposed system confirms that the issues involving the usage and dissemination of information can be addressed with success.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.119-125
• /
• 2023

IT infrastructure operation has advanced, and the methods for managing systems have become widely adopted. Recently, research has focused on improving system management using Syslog. However, utilizing log data collected through these methods presents challenges, as logs are extracted in various formats that require expert analysis. This paper proposes a system that utilizes edge computing to distribute the collection of Syslog data and preprocesses duplicate data before storing it in a central database. Additionally, the system constructs a data dictionary to classify and count data in real-time, with restrictions on transmitting registered data to the central database. This approach ensures the maintenance of predefined patterns in the data dictionary, controls duplicate data and temporal duplicates, and enables the storage of refined data in the central database, thereby securing fundamental data for big data analysis. The proposed algorithms and procedures are demonstrated through simulations and examples. Real syslog data, including extracted examples, is used to accurately extract necessary information from log data and verify the successful execution of the classification and storage processes. This system can serve as an efficient solution for collecting and managing log data in edge environments, offering potential benefits in terms of technology diffusion.

• Restorative Dentistry and Endodontics
• /
• v.36 no.2
• /
• pp.98-107
• /
• 2011

Caries remains prevalent throughout modern society and is the main disease in the field of dentistry. Although studies of this disease have used diverse methodology, recently, X-ray microtomography has gained popularity as a non-destructive, 3-dimensional (3D) analytical technique, and has several advantages over the conventional methods. According to X-ray source, it is classified as monochromatic or polychromatic with the latter being more widely used due to the high cost of the monochromatic source despite some advantages. The determination of mineral density profiles based on changes in X-ray attenuation is the principle of this method and calibration and image processing procedures are needed for the better image and reproducible measurements. Using this tool, 3D reconstruction is also possible and it enables to visualize the internal structures of dental caries. With the advances in the computer technology, more diverse applications are being studied, such automated caries assessment algorithms.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.12
• /
• pp.831-840
• /
• 2019

Flush Air Data Sensing system (FADS) estimates air data states using pressure data measured at the surface of flight vehicles. The FADS system does not require intrusive probes, so it is suitable for high performance aircrafts, stealth vehicles, and hypersonic flight vehicles. In this study, calibration procedures and solution algorithms of the FADS for a sphere-cone shape vehicle are presented for the prediction of air data from subsonic to supersonic flights. Five flush pressure ports are arranged on the surface of nose section in order to measure surface pressure data. The algorithm selects the concept of separation for the prediction of flow angles and the prediction of pressure related variables, and it uses the pressure model which combines the potential flow solution for a subsonic flow with the modified Newtonian flow theory for a hypersonic flow. The CFD code which solves Euler equations is developed and used for the construction of calibration pressure data in the Mach number range of 0.5~3.0. Tests are conducted with various flight conditions for flight Mach numbers in the range of 0.6~3.0 and flow angles in the range of -10°~+10°. Air data such as angle of attack, angle of sideslip, Mach number, and freestream static pressure are predicted and their accuracies are analyzed by comparing predicted data with reference data.

• Journal of Environmental Impact Assessment
• /
• v.31 no.4
• /
• pp.214-225
• /
• 2022

This study emphasized the soil of environmental impact assessment to devise measures to minimize the negative impact of project implementation on the environment. As a series of efforts for impact assessment procedures, a national inventory-based database was established for urban development projects, and three machine learning model performance evaluation as well as soil pollutant concentration distribution mapping were conducted. Here, nine soil pollutants were mapped to the metropolitan area of South Korea using the Random Forest model, which showed the best performance. The results of this study found that concentrations of Zn, F, and Cd were relatively concerned in Seoul, where urbanization is the most active. In addition, in the case of Hg and Cr6+, concentrations were detected below the standard, which was derived from a lack of pollutants such as industrial and industrial complexes that affect contents of heavy metals. A significant correlation between land cover and pollutants was inferred through the spatial distribution mapping of soil pollutants. Through this, it is expected that efficient soil management measures for minimizing soil pollution and planning decisions regarding the location of the project site can be established.

• Journal of Elementary Mathematics Education in Korea
• /
• v.14 no.2
• /
• pp.287-314
• /
• 2010

The algorithm is a chain of mechanical procedures, capable of solving a problem. In modern mathematics educations, the teaching algorithm is performing an important role, even though contracted than in the past. The conspicuous characteristic of current elementary mathematics textbook's manner of manipulating multiplication algorithm is exceeding converge to 'standard algorithm.' But there are many algorithm other than standard algorithm in calculating multiplication, and this diversity is important with respect to didactical dimension. In this thesis, we have reconstructed the experimental learning and teaching plan of multiplication algorithm unit by making the best use of diversity of multiplication algorithm. It's core contents are as follows. Firstly, It handled various modified algorithms in addition to standard algorithm. Secondly, It did not order children to use standard algorithm exclusively, but encouraged children to select algorithm according to his interest. As stated above, we have performed teaching experiment which is ruled by new lesson design and analysed the effects of teaching experiment. Through this study, we obtained the following results and suggestions. Firstly, the experimental learning and teaching plan was effective on understanding of the place-value principle and the distributive law. The experimental group which was learned through various modified algorithm in addition to standard algorithm displayed higher degree of understanding than the control group. Secondly, as for computational ability, the experimental group did not show better achievement than the control group. It's cause is, in my guess, that we taught the children the various modified algorithm and allowed the children to select a algorithm by preference. The experimental group was more interested in diversity of algorithm and it's application itself than correct computation. Thirdly, the lattice method was not adopted in the majority of present mathematics school textbooks, but ranked high in the children's preference. I suggest that the mathematics school textbooks which will be developed henceforth should accept the lattice method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.9-17
• /
• 2021

Curved beams are increasingly used in buildings, vehicles, ships, and aircraft, which has resulted in considerable effort being directed toward developing an accurate method for analyzing the dynamic behavior of such structures. The stability behavior of elastic circular arches has been the subject of a large number of investigations. One of the efficient procedures for the solution of ordinary differential equations or partial differential equations is the differential quadrature method DQM. This method has been applied to a large number of cases to overcome the difficulties of the complex computer algorithms, as well as excessive use of storage due to conditions of non-linear geometries, loadings, or material properties. This study uses DQM to analyze the in-plane vibration of the circular arches considering the effects of midsurface extension and rotatory inertia. Fundamental frequency parameters are calculated for the member with various parameter ratios, boundary conditions, and opening angles. The solutions from DQM are compared with exact solutions or other numerical solutions for cases in which they are available and given to analyze the effects of midsurface extension and rotatory inertia on the frequency parameters of the circular arches.