• Archives of Plastic Surgery
• /
• 제33권1호
• /
• pp.21-30
• /
• 2006

Alginate, a polymer of guluronic and mannuronic acid, is used as a scaffolding material in biomedical applications. The research was to produce highly-purified alginate from seaweeds and to evaluate the efficacy of alginate as dermal substrate. Our alginate purification method showed a production rate as high as 25%. The purified alginate contained little polyphenol contents and endotoxin, proteins. For study of wound healing, full thickness skin defects were made on the dorsal area of the animal models. And then alginate, fibroblast-growth-factor mixed alginate, alginate-collagen complex, vaseline gauze as control were applied on the wound, respectively, and were evaluated grossly and histopathologically. For biocompatibility test, alginate and alginate-collagen complex discs were implanted on the back of Sprague-Dawly rats. Four weeks after implantation, the animals were examined immunologically against alginate and collagen. Alginate and FGF-mixed alginate, alginate-collagen complex group showed statistically higher percentage of wound contraction and wound healing than control group(p<0.05). Alginate-collagen complex group and FGF-mixed alginate group showed statistically higher percentage of wound healing than alginate group. The experiment of biocompatibility and immunologic reaction against impanted alginate or collagen needs more investigation. Highly-purified alginate from seaweeds by our purification method, showed the effect of wound healing, and addition of FGF or collagen increases the alginate's wound healing effect. It shows the possibility of alginate as a dermal substrate.

• Archives of Plastic Surgery
• /
• 제33권1호
• /
• pp.13-20
• /
• 2006

Alginate, which is isolated from brown seaweed, is a bioabsorbable long chain polysaccharides, ${\beta}$-D-mannuronic acid and ${\alpha}$-L-guluronic acid. The authors produced alginates and alginate-colllagen as a disc form. Then, to evaluate the efficacy of alginate and alginate-collagen complex as a wound healing material, three full-thickness skin defects of 2 cm in diameter were made at the back of the New Zealand white rabbits. Three groups of dressing materials-alginate, alginate-collagen complex and vaseline gauze as control group - were applied on the wound and the results were evaluated grossly and histopathologically. The authors compared gross findings of sizes of healed wound, wound epithelization and wound contraction by tracing the remaining wound area at 5th, 10th, 15th, 20th, 25th day after wound introduction, and wound biopsy was performed at 3rd, 7th, 14th, 21st day, respectively. Alginate and alginate-collagen complex showed statistically higher percentage of wound contraction and wound healing compared to control group(p<0.05). Alginate-collagen complex showed statistically higher percentage of wound contraction, epithelization and wound healing compared to alginate alone. In conclusion, the result suggests that alginate has a good effect of wound healing and that alginate-collagen complex is more effective in wound healing than alginate alone.

• Journal of Pharmaceutical Investigation
• /
• 제31권2호
• /
• pp.101-106
• /
• 2001

Alginate-chitosan (anion-cationic polymeric complex) was prepared to control the release rate of silver sulfadiazine (AgSD). Na-alginate (2%) solution containing AgSD was gelled in $CaCl_2$ solution. The gel beads formed were immediately encapsulated with chitosan (CS). The gel matrix and membrane were then reinforced with chondroitin-6-sulfate (Ch6S). Release rate of AgSD from the gel matrix was investigated by placing alginate beads in the sac of cellulose membrane simmered in HEPES-buffer solution. The concentration of AgSD released was analyzed by UV at 264 nm. Incorporation capacity of AgSD in Ca-alginate gel was more than 90%. Alginate-Ch6S-CS could control the release rate of AgSD. The amount of AgSD release was dependent on the AgSD loading dose. Incorporation of tripolyphosphate (polyanionic crosslinker) onto the alginate-Ch6S-CS bead increased the release rate of AgSD. Collagen-coating had no influence on the AgSD release rate. Alginate-Ch6S-CS beads with a sufficiently high AgSD encapsulation were capable of controlling the release of the drug over 10 days. In summary, alginate-Ch6S-CS beads could be used as a sustained delivery for AgSD and provide local targeting with low silver toxicity and patient discomfort.

• 한국임상수의학회지
• /
• 제32권3호
• /
• pp.224-230
• /
• 2015

본 연구는 키토산 알지네이트 수화겔을 사용하여 제작된 연골세포의 3차원 구조를 유지하며 생물학적, 생리학적인 기능을 유지하는데 적합한 poly (L-Lactic-co-${\varepsilon}$-Caprolactone) (PLCL) 지지체의 효과에 대한 연구이다. 체내에서 수화겔은 단독으로 지지체 역할을 하기에는 부하를 견디기에 약하다. 이에 본 연구에서는 연골세포와 유사한 세포, 세포외 기질의 3차원적 구성을 만들기 위해 PLCL 지지체와 수화겔을 사용하여 합성 지지체를 제작하였다. 염화나트륨을 사용한 입자 침출 기법으로 85%의 다공성, $300-500{\mu}m$ 크기의 구멍을 가진 탄성력 높은 지지체를 제작하였다. 소의 연골세포와 키토산 알지네이트 겔 혼합물이 PLCL 지지체에 적용되었고 대조군의 알지네이트와 비교 연구하였다. 키토산 알지네이트 수화겔과 연골세포가 혼합된 경우에 알지네이트 단독 사용에 비해 세포 성숙, 증식, 세포외 기질의 합성, sGAG 생성과 II 형 콜라겐의 발현 등의 효과가 좋은 것으로 확인되었다. 본 연구 결과를 통해 PLCL 지지체에 연골세포와 키토산 알지네이트 겔 혼합물을 적용할 경우 세포 증식과 기질의 합성에 적합한 환경을 만들 수 있으며 연골의 복구와 재생에 효과적으로 사용될 수 있을 것으로 기대된다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.3-23
• /
• 2017

The achievement of tissue engineering can be highly depending on the capability to generate complicated, cell seeded three dimensional (3D) micro/nano-structures. So, various fabrication techniques that can be used to precisely design the architecture and topography of scaffolding materials will signify a key aspect of multi-functional tissue engineering. Previous methods for obtaining scaffolds based on top-down are often not satisfactory to produce complex micro/nano-structures due to the lack of control on scaffold architecture, porosity, and cellular interactions. However, a bioprinting method can be used to design sophisticated 3D tissue scaffolds that can be engineered to mimic the tissue architecture using computer aided approach. Also, in recent, the method has been modified and optimized to fabricate scaffolds using various natural biopolymers (collagen, alginate, and chitosan etc.). Variation of the topological structure and polymer concentration allowed tailoring the physical and biological properties of the scaffolds. In this presentation, the 3D bioprinting supplemented with a newly designed plasma treatment for attaining highly bioactive and functional scaffolds for tissue engineering applications will be introduced. Moreover, various in vivo and in vitro results will show that the fabricated scaffolds can carry out their structural and biological functionality.