• 대한전기학회논문지
• /
• 제39권1호
• /
• pp.16-21
• /
• 1990

A Knowledge based expert system is a computer program that emulates the reasoning process of a human expert in a specific problem domain. Expert system has the potential to solve a wide range of problems which require knowledge about the problem rather than a purely analytical approach. This papaer presents the application of knowledge based expert system to power system fault diagnosis. The contents of expert system develpped in this paper is judgement of fault section from a given alarm sets and production of all possible hypothesis for the single fault. Both relay failures and circuit breaker failures are considered simultaneously. Although many types of relay are used in actual system, experts recognize ones as several typical signals corresponding to the fault types. Therefore relays are classified into several types. The expert system is written in an artificial intelligence language "PROLOG" . Best-first search method is used for problem solving. Both forward chaining and backward chaining schemes are used in reasoning process. The application to a part of actual power system proves the availability of the developed expert system.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제23권1호
• /
• pp.1-12
• /
• 2017

예방정비는 대규모 산업시설에서 설비의 성능을 최적으로 유지하는 활동을 의미하며, 궁극적으로 고장을 미연에 방지하여 생산 효율을 극대화하는 것을 목적으로 한다. 일반적으로 인력에 의한 주기적인 정비가 이루어지지만, 지속적으로 발생하는 고장을 방지할 수 없는 문제가 있다. 또한, 문제를 조기에 해결하기 위한 고장에 대한 조치는 설비 전문가에 의존하기 때문에, 전문가의 부재 상황이나 미숙련된 전문가에 의한 진단 오류로 인한 대응의 한계가 있다. 인력에 의존한 설비 진단과 문제의 조기 발견을 돕기위해 알람 시스템이 활용되고 있지만, 단순 정보 수집을 위해 설계되고, 방대하게 알람을 발생시키므로 실제적인 효용성이 없다. 본 논문에서는 시스템에 의한 고장징후 포착과 문제의 원인 및 향후 발생할 문제를 파악하기 위해서, 전문가의 경험지식을 시스템 지식으로 구축을 통한 자동화된 예방정비시스템을 설계 및 개발하였으며, 전문가 지식을 재이용하기 위한 시스템의 구조와 활용 방안에 대해서 논한다.

• 제어로봇시스템학회논문지
• /
• 제17권11호
• /
• pp.1117-1124
• /
• 2011

An integrated fault detection and isolation method is proposed in this paper. The main objective of this paper is development fault detection, isolation and diagnosis algorithm based on the DKF (Decentralized Kalman Filter) and the bank of IMM (Interacting Multiple Model) filters using penalty scalar for both partial and total faults and the outlier detection algorithm for preventing false alarm also included. The proposed FDI (Fault Detection and Isolation) scheme is developed in four phases. In the first phase, the outlier detection filter is designed to prevent false alarm as a pre-filter. In the second phases, two local filters and master filter are designed to detect sensor faults. In the third phases, the proposed FDI scheme checks sensor residual to isolate sensor faults and 11 EKFs actuator fault models are designed to detect wherever actuator faults occur. In the last phases, four filters are designed to identify the fault type which is either the total fault or partial fault. The developed scheme can deal with not only sensor and actuator faults, but also preventing false alarm. An important feature of the proposed FDI scheme can decreases fault isolation time and figure out not only fault detection and isolation but also fault type identification. To verify the proposed FDI algorithm performance, the Simulator is also developed under the Matlab/Simulink environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.436-438
• /
• 2007

As the sensors and communication technology get advance, the remote health diagnosis for patients and senior persons at home are possible now without visiting doctors in hospitals. A low-power ubiquitous health check device was developed adapting Real-Time Embedded Linux is developed. This ubiquitous device is consisted of three sensors. The wrist type health checking terminal acquires periodically the health data by using a blood pressure sensor, a pulse sensor and a body temperature sensor. It transmits the health data to the access point located at the home center through the ZigBee wireless communication modem. This health data collector or access point device sends the data again to the main server operated in a hospital or health care organization. The health server control continuously the input data and sends an alarm signal to the assigned. doctor and responsible persons using cellular SMS when any dangerous events occur. This wrist type health check device has an embedded linux OS using Intel PAX255 MPU. The developed U-Health system is applicable for checking patients health in remote at home. And their family or related persons in remote site can check the patients health status at any time. They can be assured by receiving SMS record and alarm of emergency case which is transmitted from the health server.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.801-810
• /
• 2011

An open circuit fault diagnostic method in IGBTs for the ac to dc converters used in microgrid applications is developed in this paper. An ac to dc converter is a key technology for microgrids in order to interface both distributed generation (DG) and renewable energy resources (RES). Also, highly reliable ac to dc converters are necessary to keep converters in continuous operation as long as possible during power switch fault conditions. Therefore, the proposed fault diagnostic method is developed to reduce the fault detection time and to avoid any other fault alarms because continuous operation is desired. The proposed diagnostic method is a combination of the absolute normalized dc current technique and the false alarm suppression algorithm to overcome the long fault detection time and fault alarm problems. The simulation and experimental results show that the developed fault diagnostic method can perform fault detection within about one cycle. The results illustrate that the reliability of an ac to dc converter interfaced with a microgrid can be improved by using the proposed fault diagnostic method.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권9호
• /
• pp.449-456
• /
• 2005

The preventive diagnostic technique prevents transformers from power failure through giving alarm and observing transformers in service. And it helps to establish the plan for optimum maintenance of the transformer as well as to find location or cause of fault using accumulated data. Data detection and experience of the preventive diagnostic system need to establish the preventive diagnostic algorithm regarding interrelationship between detected data and deterioration of equipment. Therefore in-depth analysis about the preventive diagnosis system is required. KEPCO has adopted the preventive diagnostic system at nine 345kV substations since 1997. Techniques for component sensors of the preventive diagnosis system were settled but diagnosis algorithm, diagnostic criteria and practical use of accumulated data are not yet established. This paper, to build up the base of preventive diagnostic algorithm for the Power transformer. investigated the preventive diagnostic criteria for the power transformer.

• 품질경영학회지
• /
• 제21권2호
• /
• pp.1-16
• /
• 1993

Early generations of products had little to no inherent capability to test themselves. The technologies involved often required only visual inspection and limited probing to troubleshoot the system once it was turned over to maintenance personnel. However, as the complexity of military and commercial systems grew, symptoms of failure became less noticeable to the operator. Therefore, the procedure to access, inspect, repair and replace a component became complicated, the requirements for personnel skill and testing equipment increased. and it took too long of a time to maintain a system. Meanwhile, the need for availability became more mission-critical and maintenance become very expensive. The obvious solution was to design in-system circuits or devices to self-test the primary system, the Built-In-Test(BIT) was born. This approach has continued right on up through present systems and is an integral part of systems now being designed. The object of this paper is to present a state-of-the-art research for filtering out the BIT diagnosis mistakes using Bayesian analysis and develop the algorithm for Redundant systems with BIT to improve BIT diagnosis.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권6호
• /
• pp.5-11
• /
• 2003

The number of the enterprises which utilize network technology has been increasing for solving problems such as productivity improvement, market trend analysis, and material collection for making decision. Especially, the management of equipment and the recovery time reduction when machines break down are very important factors in productivity improvement of the enterprise. Currently, most of the remote trouble diagnosis of equipment using the internet have just one function of transmitting the trouble information to the user. Therefore it does not directly reflect the user's recovery experience or the developer's new recovery methods. If the user's experienced recovery methods or the developer's recovery methods as well as the basic recovery methods are reflected online or on the internet, it makes it possible to recover faster than before. In this paper, we develop a Remote Monitoring Server (RMS) for chip mounters, and make it possible to reduce the recovery time by reflecting the user's experience and developer's new methods in addition to presenting the basic recovery methods. For this, trouble recovery concept will be defined. Based on this, many functions(trouble diagnosis, the presentation of the basic recovery methods, user's and developer's recovery method, counting function of the trouble number of each code, and presentation of usage number of each recovery methods) were developed. By utilizing the reports of the actual results of chip mounter and the notice function of the parts change time, the rate of operation of the chip mounter can be improved.

• Korean Journal of Acupuncture
• /
• 제27권4호
• /
• pp.97-109
• /
• 2010

Objective : To examine whether any correlation between tendency towards depression and tenderness at special acupuncture points exists, thus to explore the potential diagnostic property of acupuncture points. Methods : A total 31 subjects were included in this study. They filled out questionnaires about their mental [Beck Depression Inventory (BDI), Stress Response Inventory (SRI), Profile of Mood States (POMS)] and physical (fatigue due to overexertion, and food accumulation) symptoms. Identical weight around Alarm points (CV17, CV12, ST25, CV5, CV4, and LR13) and transport points (BL14, BL20, BL21, BL22, BL25, and BL27) was given using an algometer and the subjects rated their pain on an 11-point numerical rating scale. Heart rate variability (HRV) was also measured. Results : The subjects were divided into two groups, normal and depressive tendency groups with a cut-off point of nine on BDI. The depressive tendency group reported significantly higher values in SRI, POMS, and questionnaire for fatigue due to overexertion. In the pressure pain measurement, depressive tendency group had more pressure pain at CV12, left side of BL20, BL14, BL22 and both sides of BL21, BL25, BL27, significantly (each p<0.05). The data of HRV did not show significant differences between groups. Conclusions : People with a tendency towards depression may be prone to stress, negative mood, and fatigue due to overexertion. In addition, they may be more likely to develop tenderness at alarm points and transport points compared with healthy people. Further research is needed to confirm this finding.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제10권1호
• /
• pp.39-56
• /
• 2010

Statistical process control (SPC) is a powerful technique for monitoring, managing, analysing and improving the process performance. However, its has limitations such as lack of engineering, statistical skill and training, and lesser importance of activity. To solve the problems, this study proposes an intelligent SPC system using specified agents which are derived through analysis and evaluation of the SPC activities. The activities investigated by the relevant researches are categorized as collection, process analysis, diagnosis, detection, cause analysis and rule generation. Also, the evaluation criteria are established as feasibility of automation, frequency, level and time. The requirements of the agent functions are derived by the evaluation, and the types of customized agents are as data collection, store, analysis, diagnosis, monitoring, alarm and reporting. A prototype SPC system represents that the functions of the proposed agents are successfully validated.