• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.139-143
• /
• 2015

We describe a survey of nearby core-collapse supernova (SN) explosion sites using integral field spectroscopy (IFS) techniques, which is an extension of the work described in Kuncarayakti et al. (2013). The project aims to constrain SN progenitor properties based on the study of the immediate environment of the SN. The stellar populations present at the SN explosion sites are studied by means of integral field spectroscopy, which enables the acquisition of both spatial and spectral information of the object simultaneously. The spectrum of the SN parent stellar population gives an estimate of its age and metallicity. With this information, the initial mass and metallicity of the once coeval SN progenitor star are derived. While the survey is mostly done in optical, the additional utilization of near-infrared integral field spectroscopy assisted with adaptive optics (AO) enables us to examine the explosion sites in high spatial detail, down to a few parsecs. This work is being carried out using multiple 2-8 m class telescopes equipped with integral field spectrographs in Chile and Hawaii.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.591-592
• /
• 2015

X1822-371 is a low mass X-ray binary with an accretion disk corona exhibiting partial eclipses and pulsations in the X-ray band. We update its orbital ephemeris by combining new RXTE observations and historical records, with a total time span of 34 years. There were 11 RXTE observations in 2011 but the eclipsing profile can be seen in only 4 of them. The eclipsing center times were obtained by fitting the profile with the same model as previous studies. Combined with the eclipsing center times reported by Iaria et al. (2011), the O-C analysis was processed. A quadratic model was applied to fit the O-C results and produced a mean orbital period derivative of $\dot{P}_{orb}=1.339(25){\times}10^{-10}s/s$, which is slightly smaller than previous records. In addition to the orbital modulation from the orbital profile, we also present our preliminary results for measuring the orbital parameters using the orbital Doppler effect from the pulsation of the neutron star in X1822-371. The updated orbital parameters from eclipsing profiles will be further compared with the ones from pulsar timing.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.30.2-30.2
• /
• 2009

TiO2는 3가지의 결정구조를 가지고 있으며 결정 입자, 구조, 상의 형태에 따라서 성질 및 기능에 영향을 주고 있다. anatase상의 애너지 밴드갭과 전자와의 재결합 확률이 크기 때문에 Rutile상 보다 우수한 성질을 갖고 있어 산화물 반도체로 이용하는 것이 적합하다. 본 실험에서는 나노로드의 TiO2를 수열처리법에 의해 합성한 후 박막을 제조하여 감응특성을 조사하였다. X선 회절분석기(X-Ray Diffraction)로 분석결과 ph=1의 루타일상을 제외하고, pH=2~7의 더 넓은 구간에서 뚜렷한 회절피크의 anatase 상이 나타났으며 다른 비정질상이 발생되지 않는 결정성이 좋은 단결정임이 나타났다. NaOH solution 을 이용하여 수열처리후 $180^{\circ}C$이상의 특정 온도 구간에서 수십 나노 로드 형태로의 2차 성장된 모습을 TEM과 EDS로 결정구조와 화학조성을 분석하였다. 그리고 BET 측정을 통해 $180^{\circ}C$의 소성온도에서 TiO2 입자의 비표면적이 가장 우수한 것으로 나타났다. 나노로드의 수용액을 Al2O3기판의 감지막 위에 떨어뜨려 네트워크된 막을 형성한후에 센서를 제작하였다. 히터 전압이 $400^{\circ}C$에서 나노 파우더센서에서는 반응이 일어나지 않은 반면, 나노 로드센서는 CH3SH에서 28% 의 높은 감도를 얻었고, Toluene의 반응에서는 15%의 감도가 나타났다. 그 외 NO, CO, H2등의 측정에서 아무런 반응이 일어나지 않았다. 이는 비교적 기공이 큰분자(Size)를 가진 CH3SH=76nm, Toluene=60nm에서 반응이 일어난 반면, H2=28nm, CO=22nm에서 감도가 나타나지 않은 것을 보아 흡착분자크기에 의한 영향이 큰 것으로 나타났다.

• Journal of the Speleological Society of Korea
• /
• v.45 no.46
• /
• pp.9-31
• /
• 1996

The Mt. Peakdu is situated in north of the main peninsula, commanding geographically coordinated between longitude W($127^{\circ}$ 15' - $128^{\circ}$ 00') to E($128^{\circ}$ 15'- $129^{\circ}$ 00'), between latitude from S($41^{\circ}$ 15'- $42^{\circ}$ 00') to N($42^{\circ}$ 10'- $42^{\circ}$ 40'). The Manjyang-Gul in Cheju volcanic island is situated in the south of the main peninsula, commanding the Korean Strait, geographically coordinated longitude N($33^{\circ}$ 32' 26") and E($126^{\circ}$ 46' 48"). The quantitative analysis using XRF of volcanic rock samples for the north of Lu- Ming- Feng in Mt. Peakdu Group and the Manjang-Gul in Cheju island was Performed. The major chemical components by group analysis are as follows; Peakdu-Mt. Cheju Peakdu-Mt. Cheju (1) $Na_2O$(3.29Wt% and 3.27Wt%) (2) MgO (3.95Wt% and 6.l5Wt%) (3) $Al_2O_3$((17.64Wt% and 15.l7Wt%) (4) $SiO_2$((50.62Wt% and 50.99Wt%) (5) $P_2O_5$ (0.36Wt% and 0.30Wt%) (6) $K_2O$ (1.37Wt% and 1.04Wt%) (7) CaO (8.56Wt% and 8.06Wt%) (8) $TiO_2$ (2.37Wt% and 2.l5Wt%) (9) MnO (0.llWt% and 0.l6Wt%) (10) $Fe_2O_3$(9.l2Wt% and 12.56Wt%) The Group analysis data were compared in the relation within the age of formation for $0.16{\pm}0.08Ma$ in Mt. Peakdu Group, and $0.42{\pm}42Ma$ or $0.42{\pm}42Ma$ in Cheju island for K-Ar age. The crystal structure are mixed crystal of monoclinic, hexagonal and triclinic system in Mt. Peakdu Group and mixed structure of triclinic and cubic system in Cheju volcanic island.ic island.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.966-970
• /
• 2010

본 연구의 대상지인 인천광역시, 부천시, 서울특별시, 김포시를 걸쳐서 흐르는 굴포천은 산업화와 도시화로 인한 생활하수 및 공장폐수의 유입, 느린 유속과 하천 복개 등과 같은 유입오염원과 하천 구조적 문제로 인하여 수질이 악화되어 왔다. 특히 하천변의 소규모 영세 공장, 중 상류에 형성된 대규모 공업단지, 지역개발에 따른 인구증가로 인한 생활하수 등은 굴포천의 주 오염원이다. 또한 직강화된 하도와 느린 유속 등 하천의 구조적인 문제점 등은 하천의 자정능력을 저하시키고 있어 현재 굴포천의 수질수준은 전국 최하위에 머물러 있다. 더욱이 입자상 오염물질의 퇴적으로 인하여 굴포천의 하상은 대부분 퇴적오니가 형성되어 있다. 이러한 퇴적오니는 다량의 유기 물질 및 중금속 등을 흡착하고 있고, 재용출에 의한 내부오염 가능성을 내포하고 있기 때문에 오염원이 제거된 후에도 계속적인 수질오염을 일으킬 수 있다(Alloway et al, 1988). 따라서 본 연구에서는 굴포천 본류 전 구간 및 유입지천에 대하여 수질 오염도와 오염부하량을 산정하였으며, 본류 하상 퇴적물의 오염도 및 퇴적물의 용출특성에 관한 조사를 수행하였다. 본 연구는 굴포천 본류 구간을 최상류(GP-1)부터 최하류(GP-7)구간까지 총 7개 구간으로 구분하여 실시하였으며 각 지점별 수질 및 퇴적물 오염도를 조사하였다. 또한 3개의 유입지천에 대하여 수질 오염도 및 오염부하량을 산정하였다. 굴포천 하상의 경우 최상류의 GP-1지점을 제외하고는 전 구간이 대부분 오염된 오니가 퇴적되어 있으며, 이러한 퇴적오니의 퇴적물 오염도를 분석해본 결과 상류부인 GP-1, GP-2와 유속이 비교적 빠른 GP-7지점에 비하여 나머지 지점들의 오염도가 매우 높은 것으로 나타났다. 이러한 하상퇴적물의 영양염류 용출특성을 알아보기 위하여 호기 및 혐기조건에서 용출실험을 실시한 결과 호기와 혐기 조건에서 T-N은 각각 34.84 $mg/m^2/day$, 66.93 $mg/m^2/day$의 용출속도를 보였고, T-P의 경우 호기 조건 시 5.33 $mg/m^2/day$, 혐기 조건 시 6.84 $mg/m^2/day$의 용출속도를 보임으로서 퇴적물 용출에 의한 내부오염의 가능성이 있음을 보였다.

• Korean Journal of Microbiology
• /
• v.6 no.4
• /
• pp.131-140
• /
• 1968

The soil of the reclaimed tidal land, located in Chogi-ri, Is. Kanghwa, Korea was used in this experiment. The experimented soil samples were collected from 18 sites with its time elapsed after the shore-protection works, soil-depth and the vegetation of saline plants, and at each site samplings were conducted monthly from March through October, 1968, for the purposes of examining the changes of microbial populations for the microbes such as bacteria, actinomycetes and fungi, by using the dilution plate method. The numbers of the microbes in these soils generally showed lower levels comparing with those of other soils. The more time elapsed after the reclamation, the higher numbers of the microbes inhibited the soils. Higher populations were there in the surface soils than in the lower part of the area. The surface soils included comparatively better conditions in aeration and contents of organic matter than in the lower part, and this fact was. same as in general soils. However, not so was this in the case of March, April and October due to the higher soil temperatures in the lows. At the experimental sites where the halophytes such as Salicorniu were grown vigourously, the more densly the plants grew, the higher populations of actinomycetes and fungi were, but not in the case of bacterial population. This means, in this soil with dense Salicornia, it is difficult to obtain good-natured soils in short time without a higher population of bacteria. For the rapid utilization of the land soil, in this view of point, the methods increasing the number of bacteria in the soil are needed as well as the cultivation and harvesting Salicorniu which indicated in the privious paper(Hong, et al., 1969a). According to the results of this experiment, the changes of soil-microbial populations in the reclaimed tidal land soil containing high salinity depend deeply upon the interrelations of many environmental factors such as soil-salinity, soil-components and contents, concentration of organic matters, pH, aeration, and air and soil temperatures, as in the general soils.

• Journal of Environmental Health Sciences
• /
• v.10 no.2
• /
• pp.41-51
• /
• 1984

This study was performed using samples collected at Myungryundong and at Reservoirs. The purpose of this study was to investigate the differences of water quality between tap and raw water, and to analyse drinking water quality by Fe, Zn from corroded galvanized steel pipe. Results were as follows 1. The older the pipe was, the higher the concentration of Ferrum and Zinc was (t-test : p<0.05). Ferrum and Zinc also exceeded the limits in the older galvanized steel pipe. I think that this comes from the corrosion of pipe. 2. Mercury, Arsenic, Cadmium, Lead, Chomium, Argentum and Aurum not detected in raw water were not detected in tap water. Cobalt, Bismuth and Molybudenum detected in raw water were not detected in tap water. I think that this comes from the quality of raw water, the result of water treatment and the improbability of detection of above metals in water delivery system. 3. Silicon measured 2.4698ppm in raw water, but it ranged from 0.4769ppm to 1.982 ppm in tap water. Manganese measured 0.0638ppm in raw water, but it ranged from 0.0026ppm to 0.0198ppm in 17cases(31%) out of 55samples in tap water. I think that this comes from the water treatment. 4. Aluminium not detected in raw water was found in 17 cases (31%) out of the samples (55cases). It may be considered as the use of coagulants $Al_2(SO_4)_3$. $18H_2O$ and PAC (Poly Aluminium Chloride). The concentration of copper in tap water was much higher in 2 cases(3.6%) out of the samples(55) than that of copper in raw water. I think that this may come from the use of ${CuSO}_4$, the preventive of algae growth, and the result of chlorination, but further study must be necoessary to support the proof.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.5
• /
• pp.1039-1055
• /
• 2014

The distribution of a test statistic under a null hypothesis depends on the unknown distribution of the data and thus is unknown as well. Conditional tests replace the unknown null distribution by the conditional null distribution, that is, the distribution of the test statistic given the observed data. This approach is known as permutation tests and was developed by Fisher (Fisher, 1935). Theoretical framework for permutation tests was given by Strasser and Weber(1999). The coin package developed by Hothon et al. (2006, 2008) implements a unified approach for conditional inference via the generic independence test. Because convenient functions for the most prominent problems are available, users will not have to use the extremely flexible procedure. In this article we briefly review the underlying theory from Strasser and Weber (1999) and explain how to transform the data to perform the generic function independence test. Finally it was illustrated with a few real data sets.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.45-48
• /
• 2003

The polishing mechanism of W-CMP process has been reported as the repeated process of passive layer formation by oxidizer and abrasion action by slurry abrasives. Thus, it is important to understand the effect of oxidizer on tungsten passivation layer in order to obtain higher removal rate (RR) and very low non-uniformity (NU%) during W-CMP process. In this paper, we investigated the effects of oxidizer on W-CMP process with three different kinds of oxidizers, such as $H_2O_2$, $Fe(NO_3)_3$, and $KIO_3$. In order to compare the removal rate and non-uniformity of three oxidizers, we used alumina-based slurry of pH 4. According to the CMP tests, three oxidizers showed different removal mechanism on tungsten surface. Also, the microstructures of surface layer by AFM image were greatly influenced by the slurry chemical, composition of oxidizers. The difference in removal rate and roughness of tungsten surface are believed to caused by modification in the mechanical behavior of $Al_2O_3$ abrasive particles in CMP slurry. Our stabilized slurries can be used a guideline and promising method for improved W-CMP process.

• Analytical Science and Technology
• /
• v.15 no.6
• /
• pp.540-549
• /
• 2002

The arrangement of encapsulated Ar atoms in the molecular-dimensioned cavities of fully dehydrated zeolite A of unit-cell composition $Cs_3Na_8HSi_{12}Al_{12}O_{48}$ ($Cs_3$-A) has been studied crystallographically to probe the confinement effect of guest species in microporous environment. Atoms of Ar were encapsulated in the cavities of $Cs_3$-A by treatment with 410 atm of Ar at $400^{\circ}C$ for two days, followed by cooling at room temperature. The crystal structure of $Cs_3Na_8H$-A(4Ar) ($P_e$ = 410 atm, $a=12.245(2){\AA}$, $R_1=0.0543$, and $R_2=0.0552$) has been determined by single crystal X-ray diffraction technique in the cubic space group $Pm\bar{3}m$ at 21 (1) $^{\circ}C$ and 1 atm. Encapsulated Ar atoms are distributed in three crystallographic distinct positions: 1.5 Ar atoms per unit cell opposite 6-rings, 1.5 opposite four-rings in the large cavity, and finally 1.0 in the sodalite-unit. The possible structures of argon clusters, such as $Ar_2$, $Ar_3$, and $Ar_4$, are proposed.