• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.151-151
• /
• 2012

A new plasma process, i.e., the combination of PIII&D and HIPIMS, was developed to implant non-gaseous ions into materials surface. HIPIMS is a special mode of operation of pulsed-DC magnetron sputtering, in which high pulsed DC power exceeding ~1 kW/$cm^2$ of its peak power density is applied to the magnetron sputtering target while the average power density remains manageable to the cooling capacity of the equipment by using a very small duty ratio of operation. Due to the high peak power density applied to the sputtering target, a large fraction of sputtered atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed plasma of sputtered target material by HIPIMS operation, the implantation of non-gaseous ions can be successfully accomplished. The new process has great advantage that thin film deposition and non-gaseous ion implantation along with in-situ film modification can be achieved in a single plasma chamber. Even broader application areas of PIII&D technology are believed to be envisaged by this newly developed process. In one application of non-gaseous plasma immersion ion implantation, Ge ions were implanted into SiO2 thin film at 60 keV to form Ge quantum dots embedded in SiO2 dielectric material. The crystalline Ge quantum dots were shown to be 5~10 nm in size and well dispersed in SiO2 matrix. In another application, Ag ions were implanted into SS-304 substrate to endow the anti-microbial property of the surface. Yet another bio-application was Mg ion implantation into Ti to improve its osteointegration property for bone implants. Catalyst is another promising application field of nongaseous plasma immersion ion implantation because ion implantation results in atomically dispersed catalytic agents with high surface to volume ratio. Pt ions were implanted into the surface of Al2O3 catalytic supporter and its H2 generation property was measured for DME reforming catalyst. In this talk, a newly developed, non-gaseous plasma immersion ion implantation technique and its applications would be shown and discussed.

• Applied Biological Chemistry
• /
• v.21 no.1
• /
• pp.63-67
• /
• 1978

The incorporation of activity in plasma lipid was determined after injection of $u-C^{14}-glucose$ to normal laying hen. The extraction of total lipid from plasma was carried out by the method of Floch et al. with some modifications. The counting of carbon-14 activity was conducted by a Beckman Liquid Scintillation System, The concentration of plasma lipid was estimated as much as 3,070mg per 100ml of plasma taken at 5 minutes after injection of tracer amount of $u-C^{14}-glucose$. The specific activity per gram of plasma lipid carbon atom per injected dose per kg body weight increased gradually following the time after injection until 120 minutes, whereas the glucose activity decreased logarithmically. The partial incorporation quotient of activity in plasma lipid from that of glucose was 0.73% until 120 minutes after the injection.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.74-85
• /
• 2013

Since the underground transportation system is a closed environment, indoor air quality problems may seriously affect many passengers' health. The purpose of this study was to understand $PM_{10}$ characteristics in the underground air environment and further to quantitatively estimate $PM_{10}$ source contributions in a Seoul Metropolitan subway station. The $PM_{10}$ was intensively collected on various filters with $PM_{10}$ aerosol samplers to obtain sufficient samples for its chemical analysis. Sampling was carried out in the M station on the Line-4 from April 21 to 28, July 13 to 21, and October 11 to 19 in the year of 2010 and January 11 to 17 in the year of 2011. The aerosol filter samples were then analyzed for metals, water soluble ions, and carbon components. The 29 chemical species (OC1, OC2, OC3, OC4, CC, PC, EC, Ag, Al, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Si, Ti, V, Zn, $Cl^-$, $NO_3{^-}$, $SO_4{^{2-}}$, $Na^+$, $NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$) were analyzed by using ICP-AES, IC, and TOR after proper pretreatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the $PM_{10}$ sources and then six sources such as biomass burning, outdoor, vehicle, soil and road dust, secondary aerosol, ferrous, and brakewear related source were classified. The contributions rate of their sources in tunnel are 4.0%, 5.8%, 1.6%, 17.9%, 13.8% and 56.9% in order.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.70-77
• /
• 2012

The Ladle Furnace Slag, about 20% of the electric arc furnace slag, has high content of free CaO and free MgO, which generates the expansion collapse by hydration reaction. Although many researchers have been endeavoring to recycle the EAF reducing slag in construction fields, there is not found the effective recycling method up to now. However, the LFS(Ladle Furnace Slag) contains mineral composition of the system of calcium aluminate with high-reactivity. Therefore, it is possible to developed the quick setting property and the high strength at the early age by the rapid cooling. This study aimed to check the reactive minerals and predict the reactivity with water on the LFS discharged from different steel product plants. The test results show that many types of LFS has hydration reactivity and can use in construction field as a inorganic binder with the rapid setting property.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Korean Journal of Ecology and Environment
• /
• v.44 no.4
• /
• pp.347-357
• /
• 2011

We examined two reservoirs (Inkyung res. and Joongang res.) and two streams (Kyungan str. and Jecheon str.), all of which were eutrophic, during the 2010 warm season, to evaluate the water quality improvement activity (WQIA) of plant-mineral composite (PMC), which was previously developed to control suspended solids, including cyanobacterial bloom (Kim et al., 2010). We simultaneously measured both solid (S-MCLR) and dissolved microcystin-LR (D-MCLR), before and after PMC treatment, in the Joongang reservoir. Taking water body size and volume into account, we conducted the whole-scale experiment in the Inkyung reservoir, and mesocosm-scale experiments in the other three systems. The WQIAs of PMC were found to be comparatively high in SS (70~81%), TP (75~91%), BOD (65~91%), Chl-a (88~98%), phytoplankton (84~92%) and zooplankton (68~88%), except for the Kyungan stream, which was below 45% in all parameters. After PMC treatment, the concentrations of both SMCLR (47%) and D-MCLR (96%) decreased within two days, suggesting a mitigation possibility of hazardous chemicals such as agrochemicals and endocrine disrupters in the aquatic ecosystem. Our results collectively indicate that PMC is a useful agent to control suspended solids, including nuisance cyanobacterial bloom and their exudates, in an undisturbed water system with a long residence time.

• Proceedings of the Korea Environmental Mutagen Society Conference
• /
• 2002.05a
• /
• pp.36-42
• /
• 2002

Diesel exhaust (DE) has been recognized as a noxious mutagen and/or carcinogen, because its components can form DNA adducts. Mechanisms governing the susceptibility to DE and the efficiency of such DNA adduct formation require clarification. The transcription factor Nrf2 is essential for inducible and/or constitutive expression of a group of detoxification and antioxidant enzymes, and we hypothesized that the nrf2 gene knockout mouse might serve as an excellent model system for analyzing DE toxicity. To address this hypothesis, lungs from nrf2(-/-) and nrf2(+/-) mice were examined for the production of xenobiotic-DNA adducts after exposure to DE (3 $mg/m^{3}$ suspended particulate matter) for 4 weeks. Whereas the relative adduct levels (RAL) were significantly increased in the lungs of both nrf2(+/-) and nrf2(-/-) mice upon exposure to DE, the increase of RAL in the lungs from nrf2(-/-) mice exposed to DE were approximately 2.3-fold higher than that of nrf2(+/-) mite exposed to DE. In contrail, cytochrome P4501Al mRNA levels in the nrf2(-/-)mouse lungs were similar to those in the nrf2(+/-) mouse lungs even after exposure to DE, suggesting that suppressed activity of phase II drug-metabolizing enzymes is important in giving ise to the increased level of DNA adducts in the Nrf2-null mutant mouse subjected to DE. Importantly, severe hyperplasia and accumulation of the oxidative DNA adduct 8-hydroxydeoxyguanosine were observed in the bronchial epidermis of nrf(-/-) mite following DE exposure. These results demonstrate the increased susceptibility of the nrf2 germ line mutant mouse to DE exposure and indicate the nrf2 gene knockout mouse nay represent a valuable model for the assessment of respiratory DE toxicity.

• CELLMED
• /
• v.11 no.3
• /
• pp.13.1-13.9
• /
• 2021

Background and Objective: Nux-vomica based traditional Unani formulation, Habb-e-Azaraqi (HAZ) is an important drug used by Unani physicians since several decades. It possesses Muqawwi-i-A'sab (nervine tonic), Muharrik-i-A'sab (nervine stimulant) properties and is an effective treatment option for diseases like Laqwa (facial palsy), Falij (paralysis), Niqris (gout) and Waja'al-Mafasil (arthritis) etc. The aim of the study is to access and provide information of HAZ for its TLC, HPTLC Fingerprinting defining its clear qualitative perspective and acute oral toxicity evaluation for its safety assessment which was not done earlier, thus contributing in the field of research. Materials and Methods: The chief ingredient, nux-vomica was detoxified as per method mentioned in Unani Pharmacopeia before its use in formulation. TLC and HPTLC was developed under four detection system i.e., UV 366nm, UV 254nm, exposure to iodine vapours and after derivatization with anisaldehyde sulphuric acid. Acute toxicity studies were performed as per OECD Guidelines 425 at a limit dose of 2000 mg/kg. Observations were done for signs of toxicity, body weight, and feed consumption at regular intervals followed by haematological and biochemistry evaluation. Results: The generated data proved the authenticity and established the TLC and HPTLC profile of the formulation. Acute toxicity revealed no significant differences in HAZ-treated animals with respect to body weight gain, feed consumption, haematology, clinical biochemistry evaluation. No significant gross pathological observation was noticed in necropsy. Conclusion: Data of the present study is substantial and scientific proof of HAZ in terms of standardization and toxicity study that can be utilize in future research activities.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4571-4584
• /
• 2022

The analysis of rapid flow transients in Reactor Coolant Pumps (RCP) is essential for a reactor safety study. An accurate and precise analysis of the RCP coastdown is necessary for the reactor design. The coastdown of RCP affects the coolant temperature and the colloidal crud in the primary coolant. A realistic and kinetic model has been used to investigate the behavior of activated colloidal crud in the primary coolant and steam generator that solves the pump speed analytically. The analytic solution of the non-dimensional flow rate has been determined by the energy ratio β. The kinetic energy of the coolant fluid and the kinetic energy stored in the rotating parts of a pump are two essential parameters in the form of β. Under normal operation, the pump's speed and moment of inertia are constant. However, in a coastdown situation, kinetic damping in the interval has been implemented. A dynamic model ACCP-SMART has been developed for System Integrated Modular and Advanced Reactor (SMART) to investigate the corrosion due to activated colloidal crud. The Fickian diffusion model has been implemented as the reference corrosion model for the constituent component of the primary loop of the SMART reactor. The activated colloidal crud activity in the primary coolant and steam generator of the SMART reactor has been studied for different equilibrium corrosion rates, linear increase in corrosion rate, and dynamic RCP coastdown situation energy ratio b. The coolant specific activity of SMART reactor equilibrium corrosion (4.0 mg s^-1) has been found 9.63×10^-3 µCi cm^-3, 3.53×10^-3 µC cm^-3, 2.39×10^-2 µC cm^-3, 8.10×10^-3 µC cm^-3, 6.77× 10^-3 µC cm^-3, 4.95×10^-4 µC cm^-3, 1.19×10^-3 µC cm^-3, and 7.87×10^-4 µC cm^-3 for ²⁴Na, ⁵⁴Mn, ⁵⁶Mn, ⁵⁹Fe, ⁵⁸Co, ⁶⁰Co, ⁹⁹Mo, and ⁵¹Cr which are 14.95%, 5.48%, 37.08%, 12.57%, 10.51%, 0.77%, 18.50%, and 0.12% respectively. For linear and exponential coastdown with a constant corrosion rate, the total coolant and steam generator activity approaches a higher saturation value than the normal values. The coolant and steam generator activity changes considerably with kinetic corrosion rate, equilibrium corrosion, growth of corrosion rate (ΔC/Δt), and RCP coastdown situations. The effect of the RCP coastdown on the specific activity of the steam generators is smeared by linearly rising corrosion rates, equilibrium corrosion, and rapid coasting down of the RCP. However, the time taken to reach the saturation activity is also influenced by the slope of corrosion rate, coastdown situation, equilibrium corrosion rate, and energy ratio β.

• Economic and Environmental Geology
• /
• v.44 no.2
• /
• pp.95-107
• /
• 2011

The Hwangsan volcanic rocks, hosting the Moisan epithermal Au-Ag deposit arc widely distributed throughout the Seongsan district, and associated with large hydrothermal alteration. They were analyzed as the Moisan and around voleanic rocks, and most of them show dacitic to rhyolitic compositions. Hydrothermal alteration related to epithermal system causes the host rocks to show the geochemical variation due to high mobility of alkali elements. These features can be applied for quantitative estimates of alteration intensity. Alteration intensity of volcanic rocks from the Moisan ranges from subtle to intense, based on AI vs. $Na_2O$ diagram. The pattern that ($CaO+Na_2O$) content decrease with increasing $K_2O$ content results from sericitic alteration, in which hydrothermal fluids continually provide $K^+$ into country rocks but remove $Ca^{2+}$ and $Na^{2+}$ of feldspars within country rocks. The decrease of ($CaO+Na_2O$) with decreasing $K_2O$ in some samples from the Moisan may be caused by advanced argillic alteration that all alkali elements are entirely removed from country rocks by acid hydrothermal fluids. Two alteration trends, based on Al and CCPI alteration indices suggest both sericitic alterations of feldsaprs to illite and sericite+chlorite$^{\circ}{\ae}$pyritc alteration of high Mg and Fe activities. Trace and Rare Earth Elements patterns show the similar geochemical variation related to hydrothermal alteration. Of LIL elements, strong depletion of $Sr^{2+}$, substituting for $Ca^{2+}$ in feldspars, appears to be resulted from removal of $Ca^{2+}$, during replacement of feldspars to alumino-silicates or phyllo silicates minerals by hydrothermal fluids. Relatively low total REEs contents (Moisan: 119-182 ppm; Seongsan: 111-209 ppm) and gently negative slopes suggest that significant mobility of LREEs appear to occur during hydrothermal alteration.