• The Korean Journal of Community Living Science
• /
• v.18 no.3
• /
• pp.391-398
• /
• 2007

Ginkgo leaves, which have been known as medical materials, were selected as new natural dyes in this study, in which it was examined whether they have the function of UV-blocker or not. Cotton, linen & Hanji(Korean traditional paper) were dyed with Ginkgo. Al, Cr, Cu, Fe and Sn were selected as mordants. UV-blocking rate of dyed samples was measured after dyeing and mordant treatment. The results of this study are as follows. First, most surface color of dyed samples was yellow except that Hanji mordanted with Cu was yellowish red. Second, dyeing repetition had positive correlations with K/S values of cotton ($r=.\;758^{**}$), linen ($r=.\;500^*$) and Hanji ($r=.\;819^{**}$), because K/S values were increased according to dyeing repetition. Third, solar UV-blocking rates had positive correlations with dyeing repetitions (p<0.01), because UV-blocking rates had increased according to dyeing repetition. Fourth, UV-blocking ability of Hanji was highest among samples, as UV-blocking rates of cotton and linen dyed after 3 dyeing repetition were up to 93%, Hanji's values were up to 98%. Therefore, it was proven that Ginkgo extracts used in this experiment as dyestuff have excellent dyeing ability and high UV-blocking ability. It is hoped that this work will lead to further research to confirm the physiological effects when human wear the clothes made from Hanji.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.5
• /
• pp.638-648
• /
• 2013

To understand the geochemical characteristics of intertidal sediment in a semi-enclosed bay, we measured various geochemical parameters, including grain size, ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS), and trace metals (Al, Fe, Cu, Pb, Zn, Cd, Hg, and As), in intertidal sediment from three bays (Deukryang Bay, Yeoja Bay, and Gamak Bay) in the southern region of Jeollanam Province. The intertidal sediment in Deukryang Bay consisted of various sedimentary types, such as sand, gravelly muddy sand, mud, and silt, whereas the intertidal sediments in Yeoja and Gamak Bays were composed mainly of mud. The concentrations of IL, COD, AVS and trace metals in the intertidal sediments of the three study regions were relatively high near areas affected by input of stream waters and/or shellfish farming waste. The concentrations of organic matter and trace metals in Gamak Bay were much higher than those in Deukryang and Yeoja Bays, which appears to be due to the influence of anthropogenic pollutants, originating from the city and the industrial complex near Gamak Bay. The evaluation results of organic matter and metal pollution using the sediment quality guidelines showed that the intertidal sediments in the three study regions were not polluted in terms of organic matter and trace metals. In future, sustainable management for sources of organic matter and trace metal is necessary to conserve a healthy benthic ecosystem in intertidal sediments.

• Korean Journal of Ecology and Environment
• /
• v.40 no.4
• /
• pp.560-568
• /
• 2007

The objectives of this study were to analyze ecological effects on effluents from the Sagok Stream (Chonnam province) as an abandoned mine drainage through necropsy-based health assessments and fish exposure tests, and to conduct In situ field pilot tests for restoration of stream water. Also, we analyzed water quality including general parameters and heavy metals. The tests were performed three times on April 2005, April 2006, and April 2007. Also, we constructed a reactor facility in the outflowing point of the abandoned mine for the remediation of AMD wastewater. In lab test, death rates in all three treatments were ${\geq}50%$ in the experiments. Necropsybased fish tissue assessments using the Health Assessment Index (HAI), indicated that the most frequently damaged tissue was liver (average: 20.8). Values of Health Assessment Index were lower in the control than any other treatments of T1, T2, and T3 and three treatments showed a distinct toxicity impacts by the AMD. In situ lethal test, concentration of Fe, Al and Zn decreased particularly by 85%, 99% and 94%, respectively through the disposal facility. Values of pH, ranged from 3.1 to 7.0, increased by 2.3 fold (mean=5.1) along with the reduction of metal contents. All fishes in P1 cage died 100% on 3 days later after the experimental setting, while all fishes in the P6 died 100% on 9 days later. Overall, these results evidently provide a key methodology for pilot test using the disposal facility and also clarify the toxicity of AMD once again, so this approach used in the pilot facilities here may reduce the acidic and toxic effects in the abandoned mining drainage.

• Fire Science and Engineering
• /
• v.22 no.2
• /
• pp.91-96
• /
• 2008

This research studied about the cause analysis of fire that was occurred in far infrared rays heater to base on the fire examples. Fire of electric heater was apt to commit error that handled an over-heating accident by judged molten mark in heat ray. Molten mark which was attached in heat ray was appeared to the form of layer short circuit by other metal material, but other metal material was not found beside the ingredient of heat wire which was mixed to an alloy of Fe-Cr-Al according to result of ingredient distribution by SEM/EDX. Also, the result of overheating experiment by layer short circuit and overvoltage showed higher febrility than normal, but there was no possibility of fire occurrence. This paper will be contributed to science for cause analysis of electric fire through analyzing physical, chemical and flame features of burnout heater on the basis of diagnosis of fire that was happened in infrared rays heater.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.559-565
• /
• 2011

The following noble series of statistical copolymers, poly[(2-(3-thienyl)ethanol n-butoxycarbonylmethylurethane)-co-3-hexylthiophene] (PURET-co-P3HT), were synthesized by the chemical dehydrogenation method using anhydrous $FeCl_3$. The structure and electro-optical properties of these copolymers were characterized using $^1H$-NMR, UV-visible spectroscopy, elemental analysis, GPC, DSC, TGA, photoluminescence (PL), and cyclic voltammetry (CV). The statistical copolymers, PURET-co-P3HT (1:0, 2:1, 1:1, 1:2, 1:3), were soluble in common organic solvents and easily spin coated onto indium-tin oxide (ITO) coated glass substrates. Hybrid bulk heterojunction photovoltaic cells with an ITO/G-PEDOT/PURET-co-P3HT:PCBM:Ag nanowires/$TiO_x$/Al configuration were fabricated, and the photovoltaic cells using PURET-co-P3HT (1:2) showed the best photovoltaic performance compared with those using PURET-co-P3HT (1:0, 2:1, 1:1, 1:3). The optimal hybrid bulk heterojunction photovoltaic cell exhibits a power conversion efficiency (PCE) of 1.58% ($V_{oc}$ = 0.82 V, $J_{sc}$ = 5.58, FF = 0.35) with PURET-co-P3HT (1:2) measured by using an AM 1.5 G irradiation (100 mW/$cm^2$) on an Oriel Xenon solar simulator (Oriel 300 W).

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.216-226
• /
• 2018

The combination dyeing have been attempted to get the various color. The objective of this research was to study the color developing effects on cotton fabrics dyed with persimmon, catechu and combination of the both by heat treatment process. These dye were applied on bleached cotton fabrics for the dyeing before post mordanting with aluminium potassium sulfate, copper sulfate, and iron sulfate. The various color changes on cotton fabric were measured by color spectrophotometer. The heat treatment of temperature around $150^{\circ}C$ for an hour can reach the highest color developing. The dyed fabrics with mordanting were heated for specific time period, which was compared without the mordanting. The post mordanted fabrics showed that more various colors can be obtained using combination dyeing. K/S values of dyed fabrics with Al, Fe, and Cu mordants were higher than the cases without mordants. The Cu mordanted fabric showed very effective color developing by the heating process. The fabrics dyed with catechu lowered L* value with little changes in a* and b* values, while the a* and b* values became higher with heat treatment. The fabrics dyed with persimmon has the lowest L* value and more changes in a*, b* value with heating process. Therefore, K/S values can be increased effectively by the combination dyeing of persimmon and catechu. Colorfastness to washing in color change was grade 2-3 in non-mordanted fabric, and grade 3 in mordanted fabric. Lightfastness of the dyed fabrics was above grade 4.

• Journal of Korean Society on Water Environment
• /
• v.30 no.3
• /
• pp.261-268
• /
• 2014

Four clays (both natural and commercial types) mainly used in Korea were tested for removal efficiency of Microcystis spp. and ecotoxicity on Daphnia magna and Vibrio fischeri. Four clays (clay A~D) were composed of 91.9~100% of sand (0.02~0.2 mm in particle size). Clay D consisted of lager particles than other clays. Major elements of the four clays were $SiO_2$ (45.3~62.8%), $Al_2O_3$ (18.5~29.7%) and $Fe_2O_3$ (5.4~7.9%). They contained kaolinite (clay mineral), quartz, muscovite, and so on. Clay C and D contained montmorillonite, one of the clay minerals improving clay-cell aggregation. For clay A, B and C, removal efficiency of Microcystis spp. was over 60% at 2 g/L. It reached about 100% at over 5 g/L. For clay D, it was over 60% and 95~100% at 5 g/L and 20 g/L respectively. After adding clays, pH decreased. The greatest drop of pH appeared at clay C. Except for addition of 100 g/L clay C, ecotoxicity on D. magna and V. fischeri didn't appeared at all dose of clays.

• Journal of Environmental Science International
• /
• v.9 no.3
• /
• pp.241-252
• /
• 2000

Twenty-two water samples(fifteen groundwater and seven geothermal water samples) were collected to elucidate chemical characteristics of the ground and geothermal waters in the Haeundae hot spring area and its vicinity. Major and honor elements were analyzed for ground and geothermal water samples. The concentrations of $K^+$, Na+$, $Ca^{2+}$, $SO_4^{2-}$, $Cl^-$, ^F^-$ and $SiO_2$ were higher in the geothermal water samples than the groundwater samples except $HCO_3^- and Mg^{2+}$ ions. Based on the contents of Fe, Zn, Cu, Al, Mn and Pb, some of the ground and geothermal water samples are contaminated by anthropogenic sources. The ground waters shown on the Piper diagram belong to $Ca-HCO_3$ type, while the geothermal waters Na-Cl type. The graphs of $Cl^-$ versus $Na^+$, $Ca^{2+}, Mg^{2+}, K^+, SO_4^{2-} and HCO_3^-$ indicate that the groundwater is related partly with mineral-water reaction and partly with anthropogenic contamination, while the geothermal water is related with saline water. On the phase stability diagram, groundwater and thermal water mostly fall in the field of stability of kaolinite. This indicates that the ground and geothermal waters proceed with forming kaolinite. Factor and correlation analyses were carried out to simplify the physicochemical data into grouping some factors and to find interaction between them. Based on the Na-K, Na-K-Ca and Na-K-Ca-Mg geothermometers and silica geothermometers, the geothermal reservoir is estimated to have equilibrium temperature between 125${$\mid$circ}C$ and 160${$\mid$circ}C$.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.447-457
• /
• 2003

In order to understand the distribution of changes of geochemical characteristics in surface sediments according to various environmental changes around the artificial Lake Shihwa, surface sediments were sampled at $13{\sim}15$ sites form 1997 to 1999 and analyzed by C/S analyzer, ICP/MS and AAS. The average $S/C_{org}$ ratio was 0.35 in the surface sediments, which is similar to 0.36, the characteristic ratio of marine sediments. Heavy metal contents and enrichment factors in the surface sediments tended to be decreasing from the head to the mouth of the Lake Shihwa. With the deposition of fine-grained sediments in the central part of lake, anoxic water column induced the sulfides compounds with Cu, Cd and Zn. Metals such as Al, Fe, Cr, Co, Ni, Cu, Zn and Cd except for Mn and Pb showed relatively high correlation coefficients among them. The contents of Cr, Co, Ni, Cu, Zn and Cd in the surface sediments of the lake were two to five times higher than those in the lake before dike construction and also in outer part of the dike. These are mainly due to the Input of untreated industrial and municipal waste-waters into the lake, and the accumulation of heavy metals by limitation of physical mixing. Although metal contents of the surface sediments at the sites near the water-gate due to outer seawater inflow tended to be lower than those during the desalination, heavy metals were deposited in areas around the new industrial complex in the evidence of spatial distribution of heavy metals in the sediments. This is mainly due to the input of untreated waste-waters from tributaries.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.5
• /
• pp.594-603
• /
• 2008

A single particle analytical technique, named low-Z particle electron probe X-ray microanalysis, was applied to characterize four samples collected at an underground shopping area connected to Dongdeamun subway station, in January and May 2006. Based on the analysis of their chemical compositions of the samples, many distinctive particle types are identified and the major chemical species are observed to be soil-derived particles, iron-containing particles. sulfates. nitrates, and carbonaceous particles. which are encountered both in coarse and fine fractions. Carbonaceous particles exist in carbon-rich and organic. Soil derived particles such as aluminosilicates, AlSi/C, $CaCO_3\;and\;SiO_2$ are more frequently encountered in spring samples than winter samples. Nitrate- and sulfate-con taming particles are more frequently encountered in winter samples, and those nitrate- and sulfate-containing particles mostly exist in the chemical forms of $Ca(CO_3,\;NO_3),\;Ca(NO_3,\;SO_4),\;(Na,\;Mg)NO_3\;and\;(Mg,\;Na)(NO_3,\;SO_4)$. Fe-containing particles which came from nearby subway platform are in the range of about 10% relative abundances for all the samples. It is observed that nitrate- and sulfate-containing particles and carbonaceous particles are much more frequently encountered in indoor aerosol samples than in outdoor aerosols, implying that $NO_x,\;SO_x$, and VOCs at the underground shopping area were more partitioned into aerosol phase.