• 한국주조공학회지
• /
• 제20권6호
• /
• pp.377-385
• /
• 2000

Al matrix composites as the most promising MMCs can be expected to be excellent engineering materials in the nearest future. So as to improve material properties of composite, many manufacturing processes have been developed. Among them, squeeze casting process which offers fine microstructure and near-net-shape is one of the most successful MMCs manufacturing processes. But, in case of with subsieve size particles (under 44 ${\mu}m$), it is very difficult to homogeneously distribute particles in matrix of Al matrix composite by various casting processes, including squeeze casting used so far. Duplex process which was developed in previous study was used to distribute the particle of subsieve size more homogeneously in matrix of Al matrix composite. Microstructures, wear and heat resistance characterization of Al-Si-Cu-Mg-(Ni)/SiCp manufactured by duplex process were examined to clarify the effect of manufacturing conditions, particle size of reinforcement and alloying elements. Al matrix composites reinforced with SiCp(10 ${\mu}m$) have the lowest wear amount among composites reinforced with 3 ${\mu}m$, 5 ${\mu}m$ and 10 ${\mu}m$ SiCp. The wear amount of Al matrix composites with 10 wt.% SiCp(3, 5, 10 ${\mu}m$) was decreased according to the increase of the sliding speed because abrasive wear takes place at high sliding speed of 4m/s and worn debris with block type occurs at low sliding speed of 1m/s. As for heat resistance, it is made clear that remarkable heat resistance property can be obtained by addition of Ni element in Al matrix composites.

• 한국주조공학회지
• /
• 제23권1호
• /
• pp.30-39
• /
• 2003

Porous hybrid preforms were fabricated by reactive sintering using the compacts consisting of SiC particles, Fe and Al powders. Squeeze casting processing was employed to produce the composite in which the matrix phase is Al-Si7Mg. The microstructural change and wear resistance of the composites were investigated in terms of an amount of SiC particles. The wear loss was increased with increasing the contact pressure in the alloy containing SiC particles coated with Cu. The most drastic change was found to the specimen tested at 2.5 MPa of contact pressure. Concerning the alloys containing SiC particles coated with Ni-P, a drastic increase in the wear loss exhibited at 2 MPa of contact pressure in those alloys containing 4 and 8 wt. % of SiC particles coated with Ni-P. In the alloy containing 16 wt. % a proportional increase in wear loss was observed to the change of contact pressure. With respecting to the sliding velocity, the wear loss of the alloy containing SiC particles coated with Cu increased at the initial stage of wear process and then decreased. Similar result was found in the alloys containing SiC particles coated with Ni-P. On the basis of the present results obtained, it was found that wear resistance of the alloys tested was improved to show in the order of the alloy reinforced by coated SiC particles > by uncoated SiC particles > by intermetallic compound without SiC particles.

• 한국광물학회지
• /
• 제11권1호
• /
• pp.20-31
• /
• 1998

Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

• 자원환경지질
• /
• 제41권1호
• /
• pp.63-79
• /
• 2008

울진광산 지역에 매립된 광미와 방치된 폐광석이 주변 하천에 미치는 영향을 평가하기 위해, 하천수, 침출수, 갱내수 및 지하수의 물리화학적인 특성을 파악하였다. 또한 폐광석 내 황화광물의 풍화 특징을 파악하기 위한 광물학적 연구와, 토양 내 미량원소의 분산 특성을 파악하기 위한 총함량 분석을 수행하였다. 매립된 광미에서 발생하는 침출수의 pH의 범위는 $2.9{\sim}6.0$이며, EC는 $99{\sim}3990{\mu}S/cm$로 주원소(최대 492 mg/l Ca; 83.8 mg/l Mg; 45.2 mg/l Na; 44.7 mg/l K; 50.8 mg/l Si) 및 미량원소(최대 $826,060{\mu}g/l$ Fe; $131,230{\mu}g/l$ Mn; $333,600{\mu}g/l$ Al; $61,340{\mu}g/l$ Zn; $2,530{\mu}g/l$ Cu; $573{\mu}g/l$ Cd; $476{\mu}g/l$ Pb)함량이 높게 나타났다. 하천수의 물리화학적 특성은 침출수와 지류의 유입에 따른 공간적 변화와 강수량에 따른 시기별 변화가 관찰되었다. 침출수의 유입으로 하천수의 용존 이온의 농도는 증가하지만 오염되지 않은 지류와의 혼합에 의한 희석작용으로 하류로 갈수록 감소한다. 건기인 2월에는 침출수 유입량이 줄어 하천수의 용존 이온 함량이 우기보다 낮다. 하지만 건기에는 지류 및 하천수의 유량 감소로 인하여 희석작용이 상대적으로 미약하여 우기에 비해 오염 확산 범위가 더 넓은 것으로 확인되었다. 배경치와 비교한 울진광산 주변의 토양시료의 중금속 농집 순서는 망간>철>납>구리>아연으로 나타났다. 울진광산에서 산출되는 황화광물은 자류철석과 섬아연석이 주를 이루며, 방연석과 황동석이 수반된다. 이 중 자류철석이 가장 풍화가 빠르게 진행되었으며, 광물 내부에 발달된 균열부와 입자 가장 자리를 따라 내부로 산화가 진행되어 철수산화광물이 생성되며, 소량의 Zn을 흡착하는 것으로 밝혀졌다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.153-153
• /
• 2017

The application of the coating supports the mechanical characteristics of the implant, and various materials and coatings are currently being used in the implant in a way to accelerate adhesion. Especially, plasma electrolytic oxidation (PEO) coating has been proposed continually with good surface treatment of titanium alloys. Also, the PEO process can incorporate Ca and P ions on the titanium surface through variables varied factor. PEO process for bioactive surface has carried out in electrolytes containing Ca and P ions. Natural bone is composed of mineral elements such as Mg, Si, Zn, Sr, and Mn, etc. Especially, Mg and Si of these elements play role in bone formation and growth after clinical implantation of bio-implants. In this study, corrosion charateristics of PEO-treated Ti-6Al-4V alloy in solution containing Si and Mg ions has been investigated using several experimental techniques. The PEO-treated surfaces were identified by X-ray diffraction, using a diffractometer (XRD, Philips X' pert PRO, Netherlands) with Cu $K{\alpha}$ radiation. The morphology was observed by field-emission scanning electron microscopy (FE-SEM, Hitachi 4800, Japan) and energy-dispersive X-ray spectroscopy (EDX, Oxford ISIS 310, England). The potentiodynamic polarization and AC impedance tests for electrochemical degradations were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to + 2000mV.

• 한국산림과학회지
• /
• 제96권2호
• /
• pp.214-221
• /
• 2007

The effect of nutrient availability and forest type on the nutrient turnover of fine roots is important in terrestrial nutrient cycling, but it is poorly understood. I measured nutrient turnover of hardwoods and softwoods at three well studied sites in the northeastern US: Sleepers River, VT; Hubbard Brook, NH; Cone Pond, NH. Significant differences in nutrient turnover by fine roots were observed among sites, but not between forest types. The magnitude of differences for each element ranged from 3 times for P and N to 8 times for Ca and Mg between sites. Smaller differences of 0.2 to 0.8 times were observed between forest types. In hardwoods, the Sleepers River 'new' site had $23kg\;ha^{-1}\;yr^{-1}$ Ca, $7kg\;ha^{-1}\;yr^{-1}$ Mg, and $16kg\;ha^{-1}\;yr^{-1}$ K turnover, owing to high root nutrient contents and turnover. Cone Pond had the highest turnover for Mn ($0.8kg\;ha^{-1}\;yr^{-1}$) and Al ($16kg\;ha^{-1}\;yr^{-1}$), owing to high nutrient contents. The Hubbard Brook hardwood site exhibited the lowest turnover of these elements. In softwoods, the variation in turnover of Ca, Mg, and K was lower than in hardwoods. The Hubbard Brook had the highest turnover for P ($1.6kg\;ha^{-1}\;yr^{-1}$), N ($31kg\;ha^{-1}\;yr^{-1}$), Mn ($0.4kg\;ha^{-1}\;yr^{-1}$), Al ($10kg\;ha^{-1}\;yr^{-1}$), Fe ($6.4kg\;ha^{-1}\;yr^{-1}$), Zn ($0.3kg\;ha^{-1}\;yr^{-1}$), Cu ($34g\;ha^{-1}\;yr^{-1}$), and C ($1.1Mg\;ha^{-1}\;yr^{-1}$). Root Ca turnover exponentially increased as soil percentage Ca saturation increased because of greater root nutrient contents and more rapid turnover at the higher Ca sites. These results imply that nutrient inputs by root turnover significantly increase as soil Ca availability improves in temperate forest ecosystems.

• 분석과학
• /
• 제14권4호
• /
• pp.311-316
• /
• 2001

본 연구는 한약재 중 우리 나라의 여러 지역에서 재배되고 있는 황기를 선택하여 유도결합 플라스마 분광분석법(inductively coupled plasma-atomic emission spectroscopy ; ICP-AES)을 이용한 미량성분을 분석하여 principal component analysis(PCA)와 pattern recognition의 원리를 이용한 chemometrics Analysis로 한약재에 함유된 미량 금속 성분 함량에 의한 원산지 판별의 가능성을 조사하였다. 황기와 토양시료는 각각 $HNO_3$와 $H_2O_2$ 그리고 $HNO_3$와 HCl를 첨가하여 microwave oven을 사용하여 전처리 하였다. ICP-AES를 사용하여 황기와 황기를 재배한 토양 속에 들어 있는 미량 금속 성분으로는 Mg, Al, K, Ca, Ti, Mn, Fe, Cu, Zn, and Ba 등이 있으며 그 중 Al과 Fe 그리고 Zn과 Ti의 함량으로는 PCA와 pattern recognition을 이용하여 각 재백지의 황기와 토양간의 연계성을 살펴보았다. 그 결과 국내산 황기와 중국산 황기를 PCA 방법으로 원산지 판별이 가능하였으며 구례, 예천, 제천, 그리고 정선의 국내산 황기의 원산지 판별이 가능하였다.

• 한국식품영양과학회지
• /
• 제35권2호
• /
• pp.231-237
• /
• 2006

알긴산을 선택적으로 분해하는 Bacillus licheniformis AL-577 균주가 생산하는 균체 외 효소를 정제하고 특성을 밝혔다. CM-Cellulose, DEAE-Sepharose 및 Gel 크로마토 그래프 등의 순서대로 정제하여 정제도가 약 98배 정도인 효소를 얻었다. 정제효소의 활성 최적 pH 및 온도는 5.0 및 $35^{\circ}C$이었고, pH 5.5이하와 pH 9.5이상의 반응조건에서는 불안정하였으며, $20^{\circ}C$이상의 온도에서는 불활성화가 쉽게 일어나는 효소였다. 얻어진 효소를 SDS-PAGE로 분자량을 측정한 결과 25,500 Da으로 추정되었다. NaCl 0.2 M 농도에서 최대의 활성을 나타내었고, 무첨가시에도 활성은 약간 나타내었다. $Cu^{2+},\;Fe^{2+},\;Mg^{2+},\;Zn^{2+}$ 등과 같은 2가 금속이 온에 의해서는 활성이 현저히 억제되었고, $K^+,\;Li^+$ 이온에 의해서 활성이 촉진됨을 알 수 있었다. 화학약품인 dithiothreitol 와 O-phenanthroline의 첨가로 인하여 약간의 활성 증가를 가져 왔으며 반면 EDTA, L-cysteine는 현저하게 감소하였다. 이 효소는 알긴산에만 특이적으로 작용함으로써 본 효소는 alginase 또는 alginate lyase인 것으로 판단되었다.

• 한국식품영양학회지
• /
• 제12권1호
• /
• pp.85-90
• /
• 1999

The characcteristics of anthocyanin pigments from crab apple (Malus prunifolia Wild. Borkh. "red fruit") by ethanol extract were investigated at various condition of light temperature sugar, organic acid me-tal ion and pH. The pigments were stable(over the 60%) on the light irradiation throughout 20 days sto-rage period at room temperature and in the pesenc of Al-foil red blue green and yellow cover were rage period at room temperature and in the pesence of Al-foil red blue green and yellow cover were very stable. The pigments also showed high thermal stbility(over the 67% at 115$^{\circ}C$ 10min) at pH2.5 respectively. The pigments with added organic acid greatly increased thickness of red color. The pig-ments with added metal ions at pH 2.5 such as Na+ K+, Mg2+ Ca2+ and Mn2+ were stable throughout 20 days storage period at $25^{\circ}C$. But Cu2+ addition showed the rapidly degradation of the pigments and Al3+ addition induced the color conversion from red to redish violet. The thickness of the red color of anthocyanin pigments increased increased as the pH decreased. These results indicated that crab apple antho-cyanin pigments might be potental source of natural food colorant. colorant.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.421-429
• /
• 2018

In this study, various electrochemical experiments were carried out to compare the corrosion characteristics of AA5052-O, AA5083-H321 and AA6061-T6 in seawater. The electrochemical impedance and potentiostatic polarization measurements showed that the corrosion resistance is decreased in the order of AA5052-O, AA5083-H321 and AA6061-T6, with AA5052-O being the highest resistant. This is closely associated with the property of passive film formed on three tested Al alloys. Based on the slope of Mott-Schottky plots of an n-type semiconductor, the density of oxygen vacancies in the passive film formed on the alloys was determined. This revealed that the defect density is increased in the order of AA5052-O, AA5083-H321 and AA6061-T6. Considering these facts, it is implied that the addition of Mg, Si, and Cu to the Al alloys can degrade the passivity, which is characterized by a passive film structure containing more defect sites, contributing to the decrease in corrosion resistance in seawater.