• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
• /
• pp.75-78
• /
• 2002

CNTs have been grown by the thermal CVD process in which $C_{2}H_{2}$ gas was deposited on the Fe - $Al(OH)_3$ mixture pretreated by mechanochemical treatment with a high energy mixer mill. As the duration time of grinding fer $Fe-(Al(OH)_3$ mixture by the mixer mill increased, amorphous $Al(OH)_3$ and more smaller Fe particles agglomerated into spheres. With unground and ground mixtures of $Fe-Al(OH)_3$, CNTs were grown at $700^{\circ}C$. As a result, CNTs grown on ground mixtures have more uniform diameter and morphology than those of unground mixture. The characterization of $Fe-Al(OH)_3$ mixture and as-grown CNTs were done by XRD, SEM and TEM.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.575-581
• /
• 2006

To precipitate the complex gel of flux and aluminum hydroxides gel, aqueous solution of the mixture of $Na_2CO_3\;and\;Na_2PO_4{\cdot}12H_2O$ was added with stirring in aqueous solution of the mixture of $Al_2(SO_4)_3{\cdot}14{\sim}18H_2O,\;Na_2SO_4$, and then the complex gel was aged in $0{\sim}30h\;at\;90^{\circ}C$. As aging time passed, the aluminum hydroxides was grown into the acicular AlO(OH) gel. Also, aging time had an effect on physical properties of the AlO(OH) gel and on crystal growth of the flaky ${\alpha}-Al_2O_3$ prepared by molten-salt precipitation. In this study, the complex gel was crystallized in temperature range of $400{\sim}1,200^{\circ}C$ after drying at $110^{\circ}C$, and then it was investigated to effect of aging time on precipitation temperature, size, thickness, morphology and particle size distribution of the flaky ${\alpha}-Al_2O_3$ crystal. As aging time passed, the flaky a${\alpha}-Al_2O_3$ crystal showed a tendency toward an increase in size and thickness as result from an increase in BET surface area and pore volume of the acicular AlO(OH) gel.

• 폴리머
• /
• 제36권1호
• /
• pp.22-28
• /
• 2012

그래핀의 우수한 열적 특성을 이용하여 에폭시 수지의 열전도 특성을 향상시키며 전기 절연성질을 유지하는 기능화된 그래핀/에폭시 복합체를 제작하여 전기 및 열전도도를 측정하였다. 기능화된 그래핀은 Hummers법을 이용하여 산화그래핀(GO)을 얻어낸 후 aluminum isopropoxide를 졸-젤 반응을 통해 $Al(OH)_3$를 그래핀 표면에 도입하여 제작하였다(Al-GO). GO와 Al-GO의 기능화 여부 확인을 위하여 XPS, FE-SEM, FE-TEM 분석을 시행하였으며 GO 표면에 $Al(OH)_3$ 층이 생성된 것을 확인하였다. 기능화된 그래핀/에폭시 복합체는 bisphenol A(DGEBA) 계열의 에폭시에 1, 3 wt%의 GO와 Al-GO를 첨가하여 전기저항을 측정하였으며 Al-GO가 GO와 비교하여 전기 절연성질이 우수하였다. 또한 DGEBA와 bisphenol F(DGEBF) 계열의 에폭시에 1 wt%의 GO와 Al-GO를 첨가하여 열전도 특성을 비교하였으며 순수 에폭시 레진과 비교하여 Al-GO/DGEBF는 23.3%, Al-GO/DGEBA는 21.8%의 열전도도 증가를 보였다.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.893-901
• /
• 1994

In this study, AlN powder of fine particle size and of high purity was synthesized by the carbothermal reduction-nitridation of monodisperse, spherical Al(OH)3 which had been prepared by sol-gel method using Al(O-sec-C4H9)3 as the starting material. Depending on the mixing order and kinds of reducing agents, the optimum condition for the preparation of AlN was determined as follows. AlN single-phase was produced by the carbothermal reduction-nitridation of (1) Benzene-washed Al(OH)3 and the reducing agent, carbon, which was mixed in a ball mill: for 5 hours at 140$0^{\circ}C$ under NH3 atmosphere; (2) The mixture prepared by hydrolysis of alkoxide solution into which carbon had been dispersed beforehand: for 5 hours at 135$0^{\circ}C$ ; (3) Al(OH)3 Poly(furfuryl alcohol) composite powder: for 2.5 hours at 135$0^{\circ}C$; (4) The mixture of Al(OH)3 and polyacrylonitrile: for 5 hours at 140$0^{\circ}C$. Addition of CaF2 increased the nitridation rate when carbon or polyacrylonitrile was used as the reducing agent; but it had no effect on the nitridation rate when furfuryl alcohol was used as the reducing agent.

• 한국재료학회지
• /
• 제11권6호
• /
• pp.519-526
• /
• 2001

Al$_2$O$_3$/ZrO$_2$ 비수성 현탁액의 분산과 레올로지에 미치는 methyl isobutyl ketone (MIBK) /ethanol (EtOH) 용매혼합의 영향을 침전밀도, 점도를 측정함으로써 조사하였다. 분산제 'Hypermer' KD-1이 첨가된 다량의 MIBK를 함유하는 용매 ($\geq$60vol%)에서 $Al_2$O$_3$와 ZrO$_2$ 입자의 침전밀도는 증가하였다. 80MIBK/20EtOH(vol%)에서 ball milling한 현탁액이 좁고 unimodal한 입자크기분포를 나타내었다. 모든 현탁액은 의가소성유동을 나타내었으나 shear thinning은 $Al_2$O$_3$/ZrO$_2$의 혼합비, MIBK/EtOH의 혼합비에 따라서 다소 다르게 거동하였다. 순수한 MIBK를 사용한 $Al_2$O$_3$(<300 s$^{-1}$ ) 및 ZrO$_2$(<3000 s$^{-1}$ ) 현탁액은 주어진 전단속도범위내에서 가장 강한 shear thinning을 나타내었다. 동일한 용매 (80MIBK/20EtOH, vol%)를 사용한 경우의 shear thinning은 $Al_2$O$_3$/ZrO$_2$의 혼합비에 거의 의존하지 않았다.

• 한국세라믹학회지
• /
• 제43권6호
• /
• pp.376-382
• /
• 2006

In the $Al(OH)_3-SiO_2-AlF_3$ system, leaf-shaped fluorotopaz was first formed at $800^{\circ}C$ and mullite whisker was formed at $1,100^{\circ}C$. The mass transportation of Al and Si as gas phase, the fast reaction and growth, and the absence of liquid phase existence in mullite whisker showed that the formation and growth of mullite was from the solid-vapor reaction.

• 한국세라믹학회지
• /
• 제44권6호
• /
• pp.325-330
• /
• 2007

High porous AlO(OH) gel is used in precursor of ceramic material, coating material and porous catalyst. For use of these, not only physiochemical control for particle morphology, pore characteristic and peptization but also studies of synthetic method for preparation of high porous AlO(OH) gel were required. In this study, high porous AlO(OH) gel was prepared through the aging and filtration process of aluminum hydroxides gel precipitated by the hydrolysis reaction of $Na_2CO_3$ solution and $Al_2(SO_4)_3$ and $Na_2SO_4$ mixed solution. In this process, optimum synthetic condition of AlO(OH) gel having excellent pore volume as studying the effect of hydrolysis pH on gel precipitates has been studied. Hydrolysis pH brought about numerous changes on crystal morphology, surface area, pore volume and pore size. Physiochemical properties of gel were investigated as using XRD, TEM, TG/DTA, FT-IR and $N_2$ BET method.

• Bulletin of the Korean Chemical Society
• /
• 제22권11호
• /
• pp.1224-1230
• /
• 2001

Single crystals of nanocomposite [GaO4Al12(OH)24(H2O)12][Al(OH)6Mo6O18]2(OH)${\cdot}$30H2O, 2, were obtained by the reaction between [GaO4Al12(OH)24(H2O)12]7+ and [Mo7O24]6- clusters in an aqueous solution, analogously to the [AlO4Al12(OH)24(H2O)12][Al(OH)6Mo6O18]2(OH)${\cdot}$29.5H2O nanocomposite, 1. The crystal structure of 2 was determined by single crystal x-ray diffraction; space group $C2}c$ (No. 15), a = 27.418(2) $\AA$, b = 15.647(2) $\AA$, c = 23.960(4) $\AA$, $\beta$ = $102.850(9)^{\circ}$, V = 10,021.5(20) $\AA3$ , Z = 4. Detailed analysis of the structural data show that the clusters are held by intimate hydrogen bondings of the surface O2- and OH- groups of the clusters as well as the ionic interactions between the oppositely charged cluster ions.

• 한국재료학회지
• /
• 제16권12호
• /
• pp.771-776
• /
• 2006

In this study, we report a method to synthesize the aluminum nitride (AlN) powders from aluminum oxyhydroxide (AlOOH). AlOOH powders were prepared from the aluminum hydroxide ($Al(OH)_3$) by heattreatment at the reaction temperature of $350^{\circ}C$. Simple heat treatment of AlOOH in the flow of $NH_3$ gas leads to the formation of hexagonal AlN powders through intermediate conversion of ${\delta}-,\;{\gamma}-$ and ${\alpha}-Al_2O_3$. The FTIR transmission spectra show a broad peak related to Al-N bonds centered around 690 $cm^{-1}$ confirming the presence of AlN. The major peaks in Raman spectra were observed in 250 $cm^{-1}$ and 659 $cm^{-1}$. From the results, synthesized powders from the AlOOH powders were confirmed AlN powders.

• 수산해양기술연구
• /
• 제39권4호
• /
• pp.291-297
• /
• 2003

Al-brass is usually used as the tube material of vessel's heat exchanger for seawater cooling system because it has high thermal conductivity and good mechanical properties and high corrosion resistance due to cuprous oxide (Cu20) layer against seawater. However, Al-brass tubes of heat exchanger for vessel at the actual environment is reported that local corrosion such as stress corrosion cracking occurred by synergism effect between mechanical factor and corrosion environment In this paper, the effect of corrosion environment on the stress corrosion cracking of Al-brass in various NH4OH of 3.5% NaCl solution, under flow by constant displacement tester. Based on the test results, the behavior of polarization, stress corrosion crack propagation and dezincification phenomenon of Al-brass are investigated. The main results are as follows：(1) Increasing range of potential from open circuit potential to repassivation gets lower, as the contain rate of NH4OH gets higher. (2) As contain rate of NH4OH gets higher, SCC of Al-brass is become activation but the protection film(Cu20) of Al-brass is created in 3.5% NaCl solution. (3) According as content of NH4OH increases in 3.5% NaCl solution, the dezincifiction area is spread. It is concluded that dezincification occurred by localized preferential anodic dissolution at stress focusing region.