• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제30권6호
• /
• pp.501-506
• /
• 2017

An infrared seeking missile does not emit any signal by itself as it is guided by passive heat signature from an aircraft. Therefore, it is difficult for the target aircraft to notice the existence of incoming missile, making it a serious threat. The usage of MAW(missile approach warning) that can notify the approaching infrared seeking missile is currently limited due to its high cost. Furthermore, effectiveness of MAW against infrared seeking missile is not available in open literature. Therefore, effect of evasive maneuver by MAW on the survivability of the aircraft is simulated to evaluate the benefit of the MAW in this research. The lethal range is used as a measure of aircraft survivability. An aircraft flying at an altitude of 5km with Mach 0.9 being tracked by air-launched AIM-9 infrared seeking missile is considered in this research. As a variable for the evasive maneuver, the MAW recognition distance of 5~7km and the G-force of 3~7G that limits maximum directional change of the aircraft are considered. Simulation results showed that the recognition of incoming missile by MAW and following evasive maneuver can reduce the lethal range considerably. Maximum reduction in lethal range is found to be 29.4%. Also, the MAW recognition distance have a greater importance than the aircraft maneuverability that is limited by structural limit of the aircraft.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제14권1호
• /
• pp.39-48
• /
• 2011

This study describes a range sensitivity of a canard controlled missile. An investigation was conducted into the relative importance of aerodynamic parameters on a guided missile. Also this study was analyzed by quantifying their effects on the missile range. To analyze the range sensitivity of a guided missile, a trajectory analysis program of a guided missile was developed. The range sensitivity analysis was conducted on a thrust, weight, drag and lift. The result of the range sensitivity analysis shows that the design parameters with the greatest effect on the missile range are thrust, drag, weight, and lift, in descending order of importance. The thrust on range extension is quite obvious to extend a range of a guided missile. In particular, the drag exhibited greater range sensitivity than lift at a guided flight. The result also shows that missile range could be maximized by applying the appropriate launch angle and canard pitch-up control.

• Journal of the Korean Operations Research and Management Science Society
• /
• 제34권4호
• /
• pp.43-56
• /
• 2009

In korean peninsular, aircraft defense with SAM (Surface-to-Air Missile) is very important because of short range of combat space in depth. Effective and successful defense operation largely depends on two factors, SAM's location and the number of SAM for each target based on missile's availability in each SAM's location. However, most previous papers have handled only the former. In this paper, we developed Set covering model which can handle both factors simultaneously and Multi-heuristic algorithm for solving allocation problem of the batteries and missile assignment problem in each battery. Genetic algorithm is used to decide optimal location of the batteries. To determine the number of SAM, a heuristic algorithm is applied for solving missile assignment problem. If the proposed model is applied to allocation of SAM, it will improve the effectiveness of air defense operations.

• Journal of Advanced Navigation Technology
• /
• 제26권2호
• /
• pp.47-53
• /
• 2022

With the recent development of defense technology, various aircraft armaments/equipments are being developed. Among them, cruise guided weapons(missile) for launching aircraft can be installed on aircraft aftersecuring reliability and safety through varioustests. In order to avoid collision with aircraft, missile separated from aircraft must release restraint of wing at the specified time, control wing in the specified direction. In order to confirm this, a test system that can control MIL-STD-1760 according to safety separation procedure and verify release performance is required. test system needs a function to check circuit for release of restraints and a function to check driving performance by controlling MIL-STD-1760. In addition, test system should be simulate environment separated from aircraft. This paper presented a testsystemthat can verify circuit and driving performance mounted on missile according to the safety separation procedure, and it was confirmed that it was normally separated from aircraft through flight tests.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.505-517
• /
• 2016

The structural integrity of a dual-purpose metal cask currently under development by the Korea Radioactive Waste Agency (KORAD) was evaluated, through numerical simulations and a model test, under high-speed missile impact reflecting targeted aircraft crash conditions. The impact conditions were carefully chosen through a survey on accident cases and recommendations from literature. In the impact scenario, a missile flying horizontally hits the top side of the cask, which is freestanding on a concrete pad, with a velocity of 150 m/s. A simplified missile simulating a commercial aircraft engine was designed from an impact loade-time function available in literature. In the analyses, the dynamic behavior of the metal cask and the integrity of the containment boundary were assessed. The simulation results were compared with the test results for a 1:3 scale model. Although the dynamic behavior of the cask in the model test did not match exactly with the prediction from the numerical simulation, other structural responses, such as the acceleration and strain history during the impact, showed very good agreement. Moreover, the containment function of the cask survived the missile impact as expected from the numerical simulation. Thus, the procedure and methodology adopted in the structural numerical analyses were successfully validated.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제27권2호
• /
• pp.213-221
• /
• 2024

Aircraft's operational effectiveness is reduced due to threats from enemy anti-aircraft weapons, which is a weak point. In particular, guided missiles, which pose a threat to aircraft, are rapidly developing due to technological advancements in seekers, and are classified as one of the important technologies in weapon systems. Missile approach warning equipment installed to ensure aircraft survivability detects guided missiles and provides relevant information to respond. Tests were conducted domestically to verify the detection level of missile approach warning equipment, and test results were presented under various test conditions.

• Journal of Advanced Navigation Technology
• /
• 제22권2호
• /
• pp.57-63
• /
• 2018

In the case of aircraft-launched guided weapons, various interface tests such as MIL-STD-1760 based power source, discrete signal, MUX communication as well as BIT of missile can verify system safety and reliability. The purpose of this case study is to develop a test bench based on MIL-STD-1760E for interoperability testing between aircraft and weapons. We proposed a testing method of the launch sequence based on the defined TIME LINE in the development phase of the missile system from the application of the power of the missile to the targeting, the transfer order, and the missile separation process. Furthermore, it will be a reference model that can maximize the verification scope in the development phase of the air to surface missile system by simulating abnormal situation to the inert missile using the error insertion function.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제20권2호
• /
• pp.255-263
• /
• 2017

An infrared-guided missile has been emerging as a major threat against combat aircraft due to its passive guidance characteristics and with recent advances in stealth technology. Hence, the infrared stealth technology and its effectiveness-evaluation technique become more significant than ever before. In this study, we applied missile aerodynamics to lethal range calculation which allowed more precise prediction. CFD analyses were newly involved in estimating drag force characteristics of an infrared-guided missile. Velocity profiles during flight period of the missile were constructed utilizing these drag characteristics and then incorporated into our in-house code to predict corresponding lethal ranges. The results showed that the present method can predict lethal range more appropriately than the previous one with constant velocity profile. As one of the results, if a fighter gains altitude more which reduces less drag of the attacking missile, then the lethal envelope increases significantly more compared to the lock-on envelope.

• Korean Management Science Review
• /
• 제27권1호
• /
• pp.75-90
• /
• 2010

In this paper, we proposed new solution procedure of the air defense missile allocation problem. In order to find the optimal location of missile, we formulated a simple mathematical model maximizing the kill probability of enemy air threat including aircraft and missile. To find the Kill probability, we developed a new procedure using actual experimental data in the mathematical model. Actual experimental data mean real characteristic factor, which was acquired when the missile had been developed through missile fire experiment. The result of this study can offer practical solution for missile allocation and the methodology in this study can be used to the decision making for the optimal military facility allocation.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제21권5호
• /
• pp.649-657
• /
• 2018

It is essential that weapons which are mounted on aircraft need to prove its reliability and safety during its developments. A guided missile should have high reliability and safety throughout various tests which are including ground tests, captive flight tests, detailed technical tests and operational tests. In these various tests, it is vital that software of each component in the guided missile should be easily updated in order to correct algorithms or errors. In this paper, we propose a software update technique based on MDTP(mass data transfer protocol) which are defined in MIL-STD-1760. The proposed techniques have the following advantages: First, software of each unit in a weapon can be updated through a test equipment without disassemble a guided missile. Second, development periods for a software update can be reduced by reusing MDTP. Third, we can easily maintenance of the software because it is based on standard. We proved its efficiency and validity through experiments. Therefore, the proposed technique should be effectively utilized for software update of a weapon mounted on an aircraft during development processes.