• 대한토목학회논문집
• /
• 제29권5D호
• /
• pp.655-662
• /
• 2009

본 연구에서는 해안선 변화량을 분석하기 위하여 다년간에 걸쳐 모니터링을 실시하였다. 실험대상지역은 해운대 해수욕장을 선정하였으며, 2005년부터 2008년까지 4년에 걸쳐 RTK-GPS 측량자료와 항공 LiDAR 자료를 수집하였다. 또한 2006년과 2009년에는 항공 LiDAR 측량을 실시하였으며, 상호 비교 분석을 통하여 시기별 해안선 변화를 분석하고자 한다. 해운대 해안의 해안선 길이는 RTK-GPS 결과(7회 측정) 평균 1,347m로 나타났으며, 항공 LiDAR의 경우(2회 측정)는 평균 1,378m로 조사되었다. 또한 2008년 11월 측정에서는 해안선 길이가 평균치 보다 약 4.5% 감소함을 알 수 있었으며, 침식과 퇴적에 대해서는 해안선 좌우측이 침식되었고 중앙부분을 중심으로 바다 쪽으로 약 3~7m정도가 퇴적됨을 알 수 있었다. 이는 양쪽 부분의 모래가 파도와 조류의 영향으로 중앙부분으로 이동한 것으로 파악된다. 그리고 해마다 해안선의 길이는 축소되고 있는 것으로 파악되었으며, 해빈 폭은 2~7m정도 증가되고 있음을 알 수 있었다.

• 한국산업보건학회지
• /
• 제21권3호
• /
• pp.139-145
• /
• 2011

Objectives: This investigation is purposed to evaluate the airborne asbestos concentrations in the public buildings having asbestos containing materials(ACMs) in Seoul. Methods: The Seoul Metropolitan Government carried out an asbestos survey to the city-owned public buildings to identify the level of risk exposure, classified into low, moderate and high risk. To evaluate the airborne concentration of asbestos, 11 sampling sites in ten buildings based on the survey were selected. The air samples from the eleven sites were analyzed by Phase Contrast Microscopy(PCM) and Transmission Electron Microscopy (TEM), and compared the analytical results from the both. Results: 1. The airborne fiber concentrations by PCM were less than the detection limit($7f/mm^2$) in 9(82%) out of 11 sampling sites. The highest concentration was 0.0043 f/cc, but it was below the guideline value for indoor air quality(0.01 f/cc), proposed by the Ministry of Environment, Korea. 2. In two sampling sites, having moderate risk level, the chrysotile was identified and showed it's concentrations of 0.0102 s/cc and 0.0058 s/cc, less than $5{\mu}m$ lengths. 3. The ACMs identified in the two sampling sites were a packing material(65% of chrysotile) in mechanical area and a thermal system insulation(5% of chrysotile) in a boiler room. Having more possibility of asbestos emission in the mechanical area, it would be required to set up and carry out the asbestos management plan. Conclusions: Based on the result of this study, the airborne asbestos concentrations in the public buildings with ACMs were generally lower than the guideline value for indoor air quality. There are widespread concerns about the possible health risk resulting from the presence of airborne asbestos fibers in the public buildings. Most of the previous studies about airborne asbestos analysis in Korea were performed based on PCM method that asbestos and non-asbestos fibers are counted together. In the public and commercial buildings, having ACMs, it is suggested that the asbestos be analyzed by TEM method to identify asbestos due to concerns about asbestos exposure to workers and unspecified people.

• 한국안전학회지
• /
• 제7권3호
• /
• pp.30-34
• /
• 1992

This study is conducted to evaluate the airborne concentration of mercury, as well as installation and efficiency of local exhaust ventilation system for 57 factories manufactured fluorescence lamps, mercury lamps and thermometers for July and August 1990. Results and conclusion are as fellows : 1) Mercury treatment factories are 32 among 57 ones, which are 18 fluorescence lamp manufacturing ones and 6 mercury lamp ones and 3 thermometer ones and 5 other ones. 2) Mean airborne concentrations of mercury for factories manufactured mercury lamps are 0.01 mg/ ㎥ in injection process and 0.0155mg/㎥ in exhaust process, and mean airborne concentration of mercury for factories manufactured thermometer are 0.023mg/㎥ in injection process and 0.012mg/㎥ in selection process. All of these airborne concentrations of mercury are lower than PEL(Permissible Exposure Limit ), 0.05mg/㎥. 3) Mean airborne concentrations of mercury for factories manufactured fluorescence lamps are 0.094mg/㎥ in injection process and 0.087mg/㎥ in exhaust process, and 0.052mg/㎥ in sealing process and 0.085mg/㎥ in other process, respectively. All of these air borne concentrations of mercury are exceeded to PEL. More than 60% among 32 factories manufactured mercury are exceeded to PEL. 4) Nine factories among 18 factories manufactured fluorestence lamps are equipped with local exhaust ventilation system, and 7 factories among 9 factories are required for the improvement of suction capacity and structure. Five factories among 14 factories manufactured mercury lamps and the other ones are equipped with local exhaust ventilation system, and 2 factories are required for the improvement of suction capacity and structure.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.249-250
• /
• 2023

The objective of this study is to evaluate the airborne sound insulation performance between housing units and community facilities during the construction phase. Community facilities adjacent to housing units can lead to noise problems, hence it is necessary to minimize noise transmission during the design phase. However, flanking noise transmitted through gaps of structures, windows, pipes, and other openings may result in substandard sound insulation performance falling below the design standards. Therefore, It is crucial to measure airborne sound insulation in the field during the construction phase. The measurement was conducted using the survey method for the field measurement of the airborne sound insulation in accordance with KS F ISO 10052:2021. Although the noise standards caused by community facilities in apartment complexes are not specified in current laws and regulations, desired noise level was set based on international guidelines for indoor noise. First, the level of noise generated in community facilities was estimated, and then the sound insulation performance was evaluated to determine whether the desired noise level was achieved.

• 한국측량학회지
• /
• 제20권2호
• /
• pp.105-110
• /
• 2002

본 연구에서는 항공 레이저 매핑 시스템(Airborne Laser Mapping System, ALMS)에 의해 생성된 DTM의 정확도 분석을 위해 500 m 간격으로 측점지역을 선정하고 GPS 측량을 통한 다양한 검증방법으로 DTM의 정확도를 분석하였다. ALMS에 의한 DTM의 각 점 사이의 고도값 추정을 위해 TIN을 제작하였고, GPS를 이용한 측점들의 커버리지를 제작하여 TIN과 중첩하는 방법으로 정확도를 분석하였다. ALMS에 의한 DTM의 고도값 정확도는 기존의 수치표고모델 제작방법보다 높은 것으로 확인되어 1/5000이상의 수치표고 제작에 ALMS를 적용할 수 있는 것으로 나타났다.

• 한국산업보건학회지
• /
• 제11권1호
• /
• pp.70-77
• /
• 2001

This study was conducted to identify the current status of occupational safety and health by checklist and to evaluate the airborne exposure to chemicals and to provide the appropriate recommendation for safety and health of laundries. A total of 20 laundries located in tile Gyungi district area were surveyed from July 20 to September 15, 2000. The prevalence of laundries having a stove and gas range were found to be 25 % and 55 %, respectively. Smoking is not allowed in 60 % of the laundries. Only 10 % of dry-cleaners were isolated. Ventilation systems in laundries had not been annually inspected. Most of the workers didn't put on respirators, MSDS were not available, and storage bottles did not contain warning labels. The bulk samples of dry cleaning agent include many chemicals that are not controlled by the MOL in Korea. The detected airborne organic solvents in the laundries were benzene, toluene, p-xylene, m-xylene, o-xylene, perchloroethylene, and 2-butoxy ethanol. The airborne concentrations of organic solvents were much less than the occupational exposure limits proposed by the Ministry of Labor(MOL) in Korea. But the concentrations of benzene exceeded the TLV of ACGIH. This study showed that the current status of occupational safety and health was not appropriate for workers in laundries. It is recommended that laundry workers should be educated for the treatment and storage of hazardous organic solvents to improve the occupational safety and health of the working environment as well as MSDS usage. Also, extended research and survey for the organic solvents that are not controlled by the MOL has to be conducted.

• Journal of Radiation Protection and Research
• /
• 제46권4호
• /
• pp.184-193
• /
• 2021

Background: The radionuclides released by the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident 9 years ago are still being monitored by various research teams and the Japanese government. Comparison of different surveys' results could help evaluate the exposure doses and the mechanism of radiocesium behavior in the urban environment in the area. In this study, we clarified the relationship between land use and temporal changes in the ambient dose rates (air dose rates) using big data. Materials and Methods: We set a series of 1 × 1 km² meshes within the 80 km zone of the FDNPP to compare the different survey results. We then prepared an analysis dataset from all survey meshes to analyze the temporal change in the air dose rate. The selected meshes included data from all survey types (airborne, fixed point, backpack, and carborne) obtained through the all-time survey campaigns. Results and Discussion: The characteristics of each survey's results were then evaluated using this dataset, as they depended on the measurement object. The dataset analysis revealed that, for example, the results of the carborne survey were smaller than those of the other surveys because the field of view of the carborne survey was limited to paved roads. The location factor of different land uses was also evaluated considering the characteristics of the four survey methods. Nine years after the FDNPP accident, the location factor ranged from 0.26 to 0.49, while the half-life of the air dose rate ranged from 1.2 to 1.6. Conclusion: We found that the decreasing trend in the air dose rate of the FDNPP accident was similar to the results obtained after the Chernobyl accident. These parameters will be useful for the prediction of the future exposure dose at the post-accident.

• 한국측량학회지
• /
• 제34권2호
• /
• pp.143-151
• /
• 2016

The distribution of seabed rock in the coastal area is relevant to navigation safety and development of ocean resources where it is an essential hydrographic measurement. Currently, the distribution of seabed rock relies on interpretations of water depth data or point based bottom materials survey methods, which have low efficiency. This study uses the airborne bathymetric Lidar data and the hyperspectral image to detect seabed rock in the coastal area of the East Sea. Airborne bathymetric Lidar data detected seabed rocks with texture information that provided 88% accuracy and 24% commission error. Using the airborne hyperspectral image, a classification result of rock and sand gave 79% accuracy, 11% commission error and 7% omission error. The texture data and hyperspectral image were fused to overcome the limitations of individual data. The classification result using fused data showed an improved result with 96% accuracy, 6% commission error and 1% omission error.

• 지구물리와물리탐사
• /
• 제22권1호
• /
• pp.29-36
• /
• 2019

항공 자력 탐사는 적은 비용과 시간으로 전 국토를 대상으로 유용 지하자원의 부존과 개발에 대한 잠재력 평가 뿐 아니라 국토의 효율적인 활용 계획의 수립과 지질 재해의 예측 등 국가의 기본적인 지구과학 정보를 제공한다. 따라서 대부분의 나라에서 국가 혹은 대륙 규모의 광역 자력 탐사를 통하여 자력 데이터베이스를 구축하여 운용하고 있다. 한국동력자원연구소(현재 한구지질자원연구원)는 1981년 전 국토를 대상으로 하는 장기적이며 체계적인 항공 방사능 및 자력탐사 프로젝트를 계획하여 1982년부터 탐사자료를 생산하기 시작하여 2017년에 완료하였으며, 2018년에 자료를 재검토, 재처리하여 항공 자력 데이터베이스를 완성하고 1:100만 자력 이상도를 발간하였다. 이 총설은 항공 자력 이상도를 소개함과 아울러 프로젝트를 수행하면서 여러 차례 바뀐 탐사 설계와 자료처리 이력에 대하여 정리함으로써 사용자들이 자료를 이해하는 데 필요한 참고 정보를 제공하고자 한다.

• 지구물리와물리탐사
• /
• 제12권1호
• /
• pp.1-7
• /
• 2009

항공전자탐사기법은 대규모의 접근이 불가능한 지역에 대한 탐사가 가능하여 화산구조를 조사하는데 유용한 탐사기법이나, 낮은 정밀도와 제한된 가탐심도의 단점을 가지고 있다. 접지된 전기송신원을 이용한 시간영역 항공 전자탐사 (GREATEM) 시스템은 항공 시간영역 전자탐사에서 가용한 탐사심도를 높이기 위한 목적으로 개발되었으며, 일본 북동부의 반다이 산 조사에 시험 적용하였다 반다이 산은 해발 1819 m의 안산암 층운화산이다. 1888년 7월에 일어난 화산분출은 북쪽 분화구에 발굽모양의 붕피 암벽과 기반부에 붕락 쇄설암을 남겼다. 이전의 연구 결과들은 반다이 산에서 실시된 GREATEM과 다른 지구물리 기법을 통해 밝혀진 반다이 산의 구조와 붕괴 메커니즘에 대한 자료의 비교분석을 가능하게 하였다. 최근의 화구구에서는 비저항 구조가, 붕괴된 분화구 지역에서는 전도성 구조가 발견되었다. 붕괴벽 주위의 전도성 구조는 열수의 작용으로 인한 변진대와 일치하고 있으며. 이러한 견과는 1888년 발생한 분출과 관련된 붕괴의 주된 원인이 화산체 내부를 구조적으로 약화시킨 열수변질작용과 관련 있다는 주장을 뒷받침하고 있다