• 한국해양공학회지
• /
• 제10권3호
• /
• pp.50-61
• /
• 1996

The breaking phenomenon of regular periodic waves generated by a numerical wave maker is simulated by finite-difference method which can cope with strong interface motions. The air and water flows are simultaneously solved in the time-marching solution procedure for the Navier-Stokes equation. A density-function technique is devised for the implemenation of the interface conditions. The accuracy is examined and applied to the simulation of two-dimensional breaking phenomena of periodic gravity waves.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 지하공간 건설기술에 관한 서울 심포지움 논문집
• /
• pp.213-218
• /
• 1993

The paper deals with problems connected with heating and ventilation of underground premises for public use. Some properties of rock and special problems connected with designing ventilation systems for underground spaces are first briefly discussed. The rest of the paper deals with design of ventilation and heating systems. The conclusion is that there are no large problems with heating and ventiliation of underground premises, but there are still problems connected with for instance thermal properties of rock when water flows in the cracks. An optimum design demands better knowledge of these properties.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.460-463
• /
• 2010

Ice accretion on aircraft surface can greatly impair the aerodynamic performance of aircraft. As an alternative to the traditional Lagrangian particle tracking approach, an Eulerian-based droplet impingement and ice accretion code for air flows containing water droplets was developed A CFD solver was also developed to solve the clean airflow. The results of present method were compared with experimental data and previous icing codes such as LEWICE and FENSAP-ICE and were confirmed to show good agreement each other in qualitative and quantitative ways.

• 전기화학회지
• /
• 제9권4호
• /
• pp.151-157
• /
• 2006

A two-dimensional numerical model to study the performance of anode-supported flat-tube solid oxide fuel cell (SOFC) far the cross section of the cell in the flow direction of the fuel and air flows is developed. In this model a mass and charge balance, Maxwell-Stefan equation as well as the momentum equation by using, Darcy's law are applied in differential form. The finite element method using FEMLAB commercial software is used for meshing, discritization and solving the system of coupled differential equations. The current density distribution and fuel consumption as well as water production are analyzed. Experimental data is used to verify a predicted voltage-current density and power density versus current density to judge on the model accuracy.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권4호
• /
• pp.377-383
• /
• 2005

This paper deals with the flow characteristics of air-water two-phase flow in a vertical tube of 10mm I.D. and 600mm in length at an adiabatic condition. The obtained experimental data were covered with the liquid superficial velocity ranging from 0.095m/s to 2.56m/s. and the gas superficial velocity ranging from 0.032m/s to 21.08m/s. The effects of the gas and liquid superficial velocity on the flow pattern transitions, frictional pressure drop, and film thickness and gas-liquid interface roughness were also examined. It was found that the film thickness increased and the liquid film wave length was more longer with the liquid superficial velocity $j_L$ increasing at $j_G$ constant. It was also showed that the frictional pressure drops were experienced in three regions. namely increasing region(bubbly flow), decreasing region (Taylor bubble and slug flows) and re-increasing region (annular flow).

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1285-1290
• /
• 2008

The interest in use of new field of energy and unused existing potential energy has been raised in number of advanced countries including South Korea. As a respond of the interest and the following reactions, a new technology which helps to reduce bad environmental factors and decrease national energy consumption rate in the way of extract cold-heat energy in dam water. This research focuses on a method that enables taking the water flows in desirable temperature range whilst keeping water temperature boundaries of bottom level water. The analysis was made in simulating on CFD. In order to keep the temperature boundary level, a deep well pump was set in piping in the simulation. As the significant result, the most alteration in temperature was found when the smallest size of pipe was plumbed. However, when the flow has small value of velocity, no matter how big the piping size was, the temperature variation was negligible. Therefore, possible hypothesis was made as bigger piping as fast flow will have better function in the way to keep the temperature boundary level.

• 헤리티지:역사와 과학
• /
• 제53권1호
• /
• pp.52-63
• /
• 2020

이 연구는 국내 대표적인 석회 동굴인 대금굴, 온달동굴, 성류굴의 내부 온도 변동의 특성과 기온이 동굴 내부 온도에 미치는 영향을 평가하기 위하여 수행되었다. 2019년 4월 13일부터 2019년 6월 25일까지 대금굴, 온달동굴 및 성류굴의 각 세 지점에서 매시간 온도를 측정하였다. 또한, 같은 기간에 동굴 주변의 기온 자료를 기상청에서 수집하였다. 수집된 자료의 기초 통계, 시간에 따른 변동 특성, 시계열 분석을 수행하였다. 대금굴, 온달동굴 및 성류굴에서 동굴 입구, 동굴수 유입 지점, 중간 지점 순으로 온도 변화가 크게 나타났다. 연구 기간 동안에 동굴 온도는 점차 증가하는 경향을 보였다. 대금굴은 외부로부터 약 150m에 위치한 모노레일 정류장에서 온도 변화가 크게 나타났고, 중간 지점 이후부터는 거의 일정하게 유지되었다. 정류장에서는 관람객의 영향으로 인해 기온의 영향이 크게 나타나지는 않았지만, 동굴 입구에서 내부로 갈수록 기온의 영향이 점차 감소하였다. 온달동굴은 입구에서 기온의 영향으로 온도가 넓은 범위를 보였지만 내부는 거의 일정하게 유지되었다. 그러나 동굴 내 관람 구간 가장 안쪽의 동굴수가 유입되는 지점에서는 유입되는 동굴수의 수온이 동굴 온도에 영향을 주었다. 성류굴은 입구와 중간 지점에서 뚜렷한 온도 변화를 보이고 내부는 거의 일정하게 유지되었다. 입구는 기온의 영향으로 온도 변화가 나타났지만, 중간지점은 기온보다는 호수의 수온에 영향을 더 많이 받은 것으로 추정되었다. 그러나 이번 연구에서는 이를 명확하게 설명하지 못하였다. 시계열 분석 결과 모든 동굴에서 기온이 약 1시간이 지난 후에 동굴 내부 온도에 영향을 주는 것으로 평가되었다. 동굴의 규모, 내부 구조, 동굴수, 동굴 입구의 크기와 형태, 공기의 흐름, 관람객 등이 동굴의 온도에 영향을 줄 수 있으므로 동굴 온도 변동 특성을 명확하게 이해하기 위해서는 이러한 요소들도 함께 고려되어야 한다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.847-852
• /
• 2009

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damange, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feed-water heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare wall thinning range according to change entrance nozzle diameter and position with reference numerical analysis model's wall thinning range, various numerical analysis models applied. In case of changing diameter, four different diameter is applied. And a side of nozzle position, two different position-vertical type and parallel type-is applied. And then this paper describes operation of numerical analysis which is composed similar condition with real feed water heater. In conclusion, this study shows effective design for shall wall thinning by changing nozzle diameter and position.

• 한국해양학회지
• /
• 제24권2호
• /
• pp.96-108
• /
• 1989

동해의 해수 순환에 영향을 주는 요인들 가운데 대기와의 열 염교환과 바람에 대한 순환계의 반응을 Semtner(1974)의 3차원 수치모델을 이용하여 규명하였다. 동해와 북태평양을 연결하는 해협을 막아 유출입이 배제된 상태에서 구해진 한국 동안을 따라 북상하는 흐름과 동해 북동부의 반시계방향 순환 등의 표층 해수 순환은 Uda(1934) 및 Naganuma(1972)에 의한 해류모식도와 유사하다. 또한 100-200m 층에서 Kim and Kim(1983)이 지적한 북한한류와 비슷한 남향류가 한국 동안을 따라 나타났고, 동해 고유냉수가 형성되는 것과 유사한 형태로 동해 북동부 해역에서 상대적으로 고염인 해수의 침강현상이 나타났다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.85-92
• /
• 1996

Numerical simulations are made for the three-dimensional flow around a wing in ground effect craft haying the complex geometry. A numerical tool is developed for the primary design of hull and wing shape of practical Wing-In-Ground effect(WIG) stop. The finite-difference method is utilized to descretize the governing equations and pressure field is obtained by using Marker-And-Cell(MAC) method. The air and water flows are simultaneously simulated in the time-marching solution procedure for the Navier-Stokes equation. The porosity technique and the density function are devised for the implementation of the three-dimensional body-boundary and the free-surface conditions, respectively. In this paper, a craft is modeled simply by three blocks containing a wing mounted on a main body horizontally, with the endplate. The numerical calculations of a WIG advancing in a calm water are performed and the WIG-generated wave profiles are also obtained. In the final paper, details of the numerical methods employed for the present study and calculated results are discussed.