• Journal of the Korean Ceramic Society
• /
• v.42 no.12 s.283
• /
• pp.854-859
• /
• 2005

Performance of micro scale intermediate temperature solid oxide fuel cell system has been successfully evaluated by computer simulation based on macro modeling. Two systems were studied in this work. The one is designed that the ceria-based electrolyte placed between composite electrodes and the other is designed that electrodes alternately placed on the electrolyte. The injected gas was composed of hydrogen and air. The polarization curve was obtained through a series of calculations for ohmic loss, activation loss and concentration loss. The calculation of each loss was based on the solving of mathematical model of multi physical-phenomena such as ion conduction, fluid dynamics and diffusion and convection by Finite Element Method (FEM). The performance characteristics of SOFC were quantitatively investigated for various structural parameters such as distance between electrodes and thickness of electrolyte.

• Journal of the Korean Ceramic Society
• /
• v.43 no.5 s.288
• /
• pp.265-269
• /
• 2006

We have deposited NiO films by RF sputtering on $Al_2O_3/SiO_2/Si$ and 100 nm-thick Gd doped $CeO_2$ covered $Al_2O_3/SiO_2/Si$ substrates at various $Ar/O_2$ ratios. The deposited films were reduced to form porous Ni thin fllms in 4% $H_2\;at\;400^{\circ}C$. For the films deposited in pure Ar, the reduction was retarded due to the thickness and the orientation of the NiO films. On the other hand, the films deposited in oxygen mixed ambient were reduced and formed porous Ni films after 20 min of reduction. We also investigated the possibility of using the films for the single chamber operation by studying the electrical property of the films in the fuel/air mixed environment. It is shown that the resistance of the Ni film increases quickly in the mixed gas environment and thus further improvements of Ni-base anodes are required for using them in the single chamber operation.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.380-385
• /
• 2005

An experimental apparatus was constructed to obtain vapor-liquid equilibrium data for $CO_2$/oil mixtures using mass analysis method with sample cylinder. Lubricants employed were POE(Polyol Ester) oil and PAG(Poly Alkylene Glycol) oil. The phase equilibria of $CO_2$/oil mixtures formed in high pressure equilibrium cell are observed through sight glasses at the opposite ends. Data were measured over the temperature range from -10 to $10^{\circ}C$ with $5^{\circ}C$ intervals under pressures up to 14 MPa. Mole fractions were calculated for $CO_2$/oil and $CO_2$/PAAG, respectively and were compared with each other.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1042-1046
• /
• 2008

Both the weighing bridge and the diverter system is a important component in achieving a high accuracy liquid flow rate standard using a static gravimetric method. The weighing bridge is a tank which weighing collected flow with a load cells. The diverter is a moving device used to direct flow alternately along its normal course(by pass) or towards the weighing tank. The time needed for collection into the weighing tank is measured using a timer. So it is important to the diversion period is sufficiently fast and triggering point of timer which is determined the filling time. On this studies show that the measurement deviation of load cell and uncertainty of diverter system for changing diversion speed and triggering point was estimated in accordance with Guide to The Expression of Uncertainty in Measurement(ISO).

• Korean Journal of Veterinary Research
• /
• v.32 no.1
• /
• pp.135-142
• /
• 1992

This experiment was carried out to establish an effective technique of in vitro maturation of porcine follicular oocytes. Porcine ovaries were collected from an abbatoir and delivered to the laboratory in phosphate buffered saline in an hour. Immatured follicular oocytes were collected from the ovaries and divided into groups by the size of follicles and by the attachment of granulosa cells. The follicular oocytes were cultured in m-KRB solution supplemented with FCS(10%), follicular fluid(10%) or hormones of PMSG(10IU/ml), hCG(10IU/ml ) and $estradiol-17{\beta}(1{\mu}g/ml)$ for 48 hours at $39^{\circ}C$ under an atmosphere of 5% $CO_2$ in air. The results are as follows ; 1. The mean recoveration rate of follicular oocytes was 61.8%. 2. The maturation rate was significantly(p<0.05) higher when the oocytes were collected from large-sized follicles and under good state of granulosa cell attachment. 3. The maturation rate was significantly(p<0.01) promoted when the follicular oocytes were cultured in m-KRB solution supplemented with follicular fluid(74.8%) or hormones and fetal calf serum(70.6%).

• Korean journal of food and cookery science
• /
• v.33 no.2
• /
• pp.198-208
• /
• 2017

Purpose: To improve the quality of basic gluten-free rice bread composed of white rice flour, salt, sugar, yeast, skim milk powder, olive oil, and water, the effects of transglutaminase (TGase), whey protein (WP), propylene glycol alginate (PGA), and hydroxypropylmethylcelluose (HPMC) were investigated. Methods: TGase, WP, PGA, and HPMC were added to rice flour cumulatively. The pasting properties of rice flour blends as well as volume, shape, color value, textural properties and sensory evaluation of basic rice bread (RB1) RB1+TGase (RB2), RB1+TGase+WP (RB3), RB1+TGase+WP+PGA (RB4), and RB1+TGase+WP+PGA+HPMC (RB5) were compared. Results: Consistency of rice batter increased upon addition of TGase, WP and PGA, and RB3 and RB4 had higher specific volumes than others. PGA improved volume, crumb air cell uniformity, and resilience but lowered elasticity and moistness of RB. HPMC increased, hardness, moistness and softness, and slightly reduced volume. Conclusion: Therefore, it is suggested that hydrocolloids, PGA and HPMC may be necessary to improve volume, crumb structure, textural properties and overall eating quality of gluten-free rice bread.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.1
• /
• pp.10-18
• /
• 2010

Controlled electrodeposition of dendritic nano-structured gold-platinum (AuPt) alloy onto an electrochemically pretreated carbon paper substrate was conducted in an attempt to improve catalyst utilization and to secure an electronic percolation network toward formic acid (FA) fuel cell application. The AuPt catalysts were obtained by potentiostatic deposition. AuPt catalysts synthesized as bimetallic alloys with 60% Au content exhibited the highest catalytic activity towards formic acid electro-oxidation. The origin of this high activity and the role of Au were evaluated, in particular, by XPS analysis. Polarization and stability measurements with 1 mg $cm^{-2}$ AuPt catalyst (only 0.4 mg $cm^{-2}$ Pt) showed 52 mW $cm^{-2}$ and sustainable performance using 3M formic acid and dry air at $40^{\circ}C$.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.180-185
• /
• 1994

The productivity of alkaloid in the airlift fermentor operation was less than that of suspension coltures of Eschscholtzia californica cells in the shake flask. To overcome the productivity reduction, a gas recycle airlift fermentor was developed because the gas-stripping in normal airlift fermentor was believed to play a significant role for productivity reduction. The alkaloid content in the gas recycle system with Eschscholtzia californica suspension cells was 2.7 times higher than that of normal airlift fermentor. The productivity of alkaloids and $CO_2$ concentration were affected by the volume of gas reservoir in the gas recycle airlift fermentor.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.5
• /
• pp.407-417
• /
• 2016

Effects of resistant starch as a functional substitute on the quality of Yukwa were determined. Replacement ratios of resistant starch were 2, 4, and 6% of glutinous rice flour. Regarding pasting properties of Yukwa dough replaced with resistant starch, initial pasting temperature significantly increased and peak viscosity significantly decreased with increasing resistant starch. The moisture contents of bandegi and Yukwa base replaced with resistant starch were higher than that of the control. The expansion ratio of Yukwa base replaced with resistant starch significantly decreased with increasing resistant starch, and there were no significant differences in the oil absorption ratio. Lightness (L) of Yukwa base replaced with resistant starch increased significantly with increasing resistant starch. Appearance of Yukwa base replaced with resistant starch showed a shortened length and increased width with increasing resistant starch, and cross-section showed an oval shape, fine air cell distribution, and increased outer layer thickness. Hardness and peak number increased significantly with increasing resistant starch. The overall acceptability of Yukwa base replaced with 6% resistant starch was the highest among the samples, but the result was not significant. The above results show that resistant starch substitution in Yukwa improved the texture and further could improve health functionality due to its dietary fiber content. Resistant starch was appropriate as a 6% replacement for glutinous rice flour in Yukwa.

• Advances in nano research
• /
• v.4 no.4
• /
• pp.295-307
• /
• 2016

The present research work reports a low temperature ($40^{\circ}C$) chemical precipitation technique for synthesizing hydroxyapatite (HAp) nanoparticles of spherical morphology through a simple reaction of calcium nitrate tetrahydrate and di-ammonium hydrogen phosphate at pH 11. The crystallinity of the single-phase nanoparticles could be improved by calcinating at $600^{\circ}C$ in air. Thermogravimetric and differential thermal analysis (TG-DTA) revealed the synthesized HAp is stable up to $1200^{\circ}C$. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) studies confirmed the formation of spherical nanoparticles with average size of $23.15{\pm}2.56nm$ and Ca/P ratio of 1.70. Brunauer-Emmett-Teller (BET) isotherm of the nanoparticles revealed their porous structure with average pore size of about 24.47 nm and average surface area of $78.4m2g^{-1}$. Fourier transform infrared spectroscopy (FTIR) was used to confirm the formation of P-O, OH, C-O chemical bonds. Cytotoxicity and MTT assay on MG63 osteogenic cell lines revealed nontoxic bioactive nature of the synthesized HAp nanoparticles.