• 제목/요약/키워드: Air-blast

검색결과 323건 처리시간 0.026초

잔골재 치환율별 저탄소 무기결합재를 사용한 모르타르의 유동 및 강도 특성에 관한 실험적 연구 (An Experimental Study on the Flowing and Strength Properties of Mortar using Low Carbon Inorganic Binder by Sand Replacement Ratio)

  • 배상우;이윤성;이강필;이상수;송하영
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
    • /
    • pp.63-64
    • /
    • 2011
  • This study is about the mortar in which fine aggregate is substituted by low-carbon eco-friendly inorganic composite prepared by addition of alkali accelerator in industrial by-products such as blast furnace slag, red mud and silica fume as a replacement for cement. Results of experiments on flow and strength properties in mortar of inorganic composite according to replacement rate of fine aggregate showed that amount of air and table flow decreased as replacement rate of fine aggregate about inorganic composite got higher. Also, it's shown that the compressive strength was the highest at replacement rate 50% of fine aggregate about inorganic composite.

  • PDF

열간 압연강의 고온산화에 미치는 전기로제조법, 고로제조법 및 탄소량의 영향 (Effect of Arc Furnace Manufacturing Process, Blast Furnace Manufacturing Process, and Carbon Content on High-temperature Oxidation of Hot-rolled Steel between 650 and $900^{\circ}C$)

  • 김민정;봉성준;이동복
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
    • /
    • pp.75-76
    • /
    • 2011
  • Hot-rolled steel plates of SPHC and SS400 were oxidized at 600, 750 and $900^{\circ}C$ for 2hr in air. With an increase in oxidation temperature, their oxidation rates increased, being accompanied with formation of pores and cracks in the thickened oxide scales that were non-adherent. The SPHC steels that were manufactured by either the arc furnace or the blast furnace displayed similar oxidation rates, indicating that their oxidation rates were insensitive to the manufacturing processes. The medium-carbon SS400 steel displayed a little faster oxidation rates than the low-carbon SS400 steel, indicating that the carbon content did not significantly influence the oxidation rates.

  • PDF

야자활성탄을 활용한 라돈흡착형 고로슬래그 경화체의 특성 (Properties of Radon Absorbed Blast Furnace Slag Matrix using Palm Activated Carbon)

  • 이재훈;박채울;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 추계 학술논문 발표대회
    • /
    • pp.160-161
    • /
    • 2019
  • Recently, a bed company's product has detected a certain level of radon or higher, making it a popular search word on portal sites. Because of this problem, people are becoming more interested in radon. The government plans to support the establishment of a radon alert system for households through a radon concentration survey of 10,000 households. The use of palm charcoal as an indoor finishing material will reduce the risk of lung cancer through radon reduction. The experiment used a method of replacing palm activated carbon with blast furnace slag, and the adsorption performance of radon tends to increase as the replacement rate of palm activated carbon increases.

  • PDF

Effect of shear zone on dynamic behaviour of rock tunnel constructed in highly weathered granite

  • Zaid, Mohammad;Sadique, Md. Rehan;Alam, M. Masroor;Samanta, Manojit
    • Geomechanics and Engineering
    • /
    • 제23권3호
    • /
    • pp.245-259
    • /
    • 2020
  • Tunnels have become an indispensable part of metro cities. Blast resistance design of tunnel has attracted the attention of researchers due to numerous implosion event. Present paper deals with the non-linear finite element analysis of rock tunnel having shear zone subjected to internal blast loading. Abaqus Explicit schemes in finite element has been used for the simulation of internal blast event. Structural discontinuity i.e., shear zone has been assumed passing the tunnel cross-section in the vertical direction and consist of Highly Weathered Granite medium surrounding the tunnel. Mohr-Coulomb constitutive material model has been considered for modelling the Highly Weathered Granite and the shear zone material. Concrete Damage Plasticity (CDP), Johnson-Cook (J-C), Jones-Wilkins-Lee (JWL) equation of state models are used for concrete, steel reinforcement and Trinitrotoluene (TNT) simulation respectively. The Coupled-Eulerian-Lagrangian (CEL) method of modelling for TNT explosive and air inside the tunnel has been adopted in this study. The CEL method incorporates the large deformations for which the traditional finite element analysis cannot be used. Shear zone orientations of 0°, 15°, 30°, 45°, 60°, 75° and 90°, with respect to the tunnel axis are considered to see their effect. It has been concluded that 60° orientation of shear zone presents the most critical situation.

지속시간이 긴 저주파 발파진동과 주거 구조물에 미치는 영향 (Low frequency Long Duration Blast Vibrations and Their Effect on Residential Structures)

  • Roy M. P.;Sirveiya A. K.;Singh P. K.
    • 화약ㆍ발파
    • /
    • 제23권2호
    • /
    • pp.57-66
    • /
    • 2005
  • A major concern with blasting at surface mines is generation of ground vibration, air blast, flyrock, dust & fume and their impact on nearby structures and environment. A study was conducted at a coal mine in India which produces 10 million tonne of coal and 27 million cubic meter of overburden per annum. Draglines and shovels with dumpers carry out the removal of overburden. Detonation of 100 tonnes of explosives in a blasting round is a common practice of the mine. These large sized blasts often led to complaints from the nearby inhabitants regarding ground vibrations and their affects on their houses. Eighteen dragline blasts were conducted and their impacts on nearby structures were investigated. Extended seismic arrays were used to identify the vibration characteristics within a few tens meters of the blasts and also as modified by the media at distances over 5 km. 10 to 12 seismographs were deployed in an array to gather the time histories of vibrations. A signature blast was conducted to know the fundamental frequency of the particular transmitting media between the blast face and the structures. The faster decay of high frequency components was observed. It was also observed that at distances of 5km, the persistence of vibrations in the structures was substantially increased by more 10 seconds. The proximity of the frequency of the ground vibration to the structure's fundamental frequencies produced the resonance in the structures. On the basis of the fundamental frequency of the structures, the delay interval was optimized, which resulted into lower amplitude and reduced persistence of vibration in the structures.

고로슬래그 미분말을 혼입한 순환골재 콘크리트의 압축강도 및 동결융해 저항성 (Compressive Strength and Resistance to Freezing and Thawing of Recycled Aggregate Concrete Containing Ground Granulated Blast Furnace Slag)

  • Bae, Suho;Jeon, Juntai
    • 한국재난정보학회 논문집
    • /
    • 제9권4호
    • /
    • pp.469-475
    • /
    • 2013
  • 이 연구의 목적은 고로슬래그 미분말을 혼입한 순환골재 콘크리트의 압축강도 및 동결융해 저항성을 평가하는 것이다. 이를 위하여 순환골재 대체율에 따라 고로슬래그 미분말 혼입률을 변수로 콘크리트 공시체를 제작한 후 이들의 압축강도 및 동결융해 저항성을 평가하였다. 고로슬래그 미분말 20% 혼입한 순환골재 콘크리트의 재령 28일 압축강도는 플레인 콘크리트보다 훨씬 우수하였고, 동결융해 300 사이클 시험 결과, 콘크리트의 공기량을 4~6% 유지하였을 때, 순환골재 대체율 및 고로슬래그 미분말 혼입률이 동결융해 저항성에 미치는 영향은 거의 없는 것으로 나타났다.

정제유지류 및 팽창성 인공 기포 조합이 고로슬래그 다량치환 콘크리트의 내구성 및 미시적 특성에 미치는 영향 (Effect of Emulsified Refine Cooking Oil and Expandable Microsphere on Durability of High-Volume Blast Furnace Slag Concrete)

  • 한민철;한동엽;이명호
    • 한국건축시공학회지
    • /
    • 제15권2호
    • /
    • pp.201-207
    • /
    • 2015
  • 본 연구에서는 고로슬래그 다량치환 콘크리트의 탄산화 저항성 및 내동해성 향상을 위하여 팽창성 인공 기포인 Expancel과 ERCO를 조합 사용하고 그에 따른 일련의 실험을 진행하고자 한다. 연구결과에 따르면 ERCO 치환에 따라 비누화반응에 의한 모세관공극 충전효과로 탄산화 저항성이 향상되었으며, 이 때 문제점으로 지적된 내동해성 저하현상을 개선하기 위하여 Expancel을 사용하였는데, Expancel 치환율이 증가함에 따라 내동해성이 대폭 개선되는 것으로 나타났다. 이는 Expancel이 외부압력에 의해 선택적으로 체적축소현상과 기포간격계수의 감소에 기인한 결과로 판단된다.

과수용 방제기 전도 방지 구조물의 설계 (Design of Roll-over Protection Structure for an Orchard Sprayer)

  • 강태경;이채식;전현종;최덕규;박석호;김혁주;강태환
    • Journal of Biosystems Engineering
    • /
    • 제36권6호
    • /
    • pp.407-415
    • /
    • 2011
  • Damage to agricultural production caused by insects and diseases affects farming yields. The orchard sprayer is mainly used in the country to protect the fruit in a large area, with less effort and at minimum cost. The excellent performance of the air blast spray increases the fruit protection. Chemical application in orchards has been accomplished by the orchard sprayers with air assist nozzles and a axial fan in Korea. However, the orchard sprayers without ROPS resulted in severe injury or death when operators drive the sprayers improperly on hilly orchard or farming road. This study was to develop a ROPS for the orchard sprayers improving farmer's safety. In this study, the accident case was used in analysing the design and building TOP structure of the orchard sprayer. The maximum impact, body torsion frame structures including the driver's protection are also analysed for adherence to safety regulations. The ROPS safety regulations according to the strength test results were established.

Water-Gel 모사 추진제의 충돌 분무 특성 연구 (Spray Characteristics of Water-Gel Propellant by Impinging Injector)

  • 황태진;이인철;김상선;구자예
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 제33회 추계학술대회논문집
    • /
    • pp.11-14
    • /
    • 2009
  • 젤(gel) 추진제는 고체 및 액체 추진 시스템의 장점 중 높은 비추력, 저장성, 추력 제어, 비독성, 누설 방지와 같은 특성으로 고성능 추진 시스템에 활용되어 지능형 전략 미사일 또는 발사체의 부스터 및 여러 추진 시스템에 사용될 수 있다. 젤 모사 추진제는 물, Carbopol 941, NaOH 농축액을 혼합하여 제작되었으며, 물과 젤 모사 추진제를 충돌형 인젝터에서 분사시켜 분무 특성을 고찰하였다. 젤 모사 추진제의 충돌 분무에 의해 나타난 긴 액막(liquid sheet)은 강한 상호 분자력에 관련한 중합(polymeric)효과를 나타낸다. 물 분사와 비교했을 때 젤 모사 추진제의 미립화 억제와 난류 천이 지연에 관련된 높은 점도로 인하여 저조한 미립화 특성과 좁은 범위의 분무각을 나타내었다.

  • PDF

전복의 동결에 관한 연구 1. 동결속도가 전복품질에 미치는 영향 (STUDIES ON FREEZING OF ABALONE (1) Effects of Freezing Rate on the Qualify of Frozen Abalone)

  • 송대진
    • 한국수산과학회지
    • /
    • 제6권3_4호
    • /
    • pp.101-111
    • /
    • 1973
  • 생 전복을 액체질소동결, 송풍동결, 반송풍동결, 정지공기동결의 네가지 동결방법으로 동결하여 $-20^{\circ}C$에서 3개월간 저장하여 동결방법에 의한 전복근육의 물성적 변화, 단백질의 변성 등을 검토하여 다음과 같은 결과를 얻었다. 1) 생전복의 사후경직은 다른 어류보다 빨랐다. 2) 압측시험치, 전단시험치는 액체질소동결을 제외하고는 동결방법에 의한 차는 없었고, 저장기간이 길어짐에 따라 약간 감소하였다. 3) 염가용성질소는 동결저장기간중 용출량이 완만하게 감소하였다. 4) 유리수의 유출량은 패주와 다리 사이에는 차가 있었고, 저장기간중 패주는 유리수가 증가하는 경향이었다. 5) Texture의 Panel test 결과 저장기간을 통하여 Texture가 감소하는 경향이었으며, Texture의 변화는 유리수의 변화(P<0.01), 단백질의 변성(P<0.05), 압축시험치의 변화(P<0.05)와 유의의 상관관계가 있었다. 본 논문을 지도하여 주신 동경수산대학 교수 전중 화부 박사 그리고 논문의 작성에 조언해 주신 부산 수산대학 식품공학과 이응호 박사님께 감사의 뜻을 표한다.

  • PDF