• 한국유기농업학회지
• /
• 제7권2호
• /
• pp.153-161
• /
• 1999

No-till direct-sown rice-wheat relaying cropping system has major advantages such as labor and cost saving by eliminating tillage and preparation of seed bed and transplanting. In this system, rice sowing was done simultaneously wheat harvesting. A paddy field experiment was conducted to evaluate effects of no-till years on soil microbial changes and soil physico-chemical characteristics with rice growth and development. Chemical fertilizers and agricultrual chemicals was not applied in no-till system. As the year in no-till direct-sown system the air permeability was increased and after water submerging soluble nitrogen was released Aerobic microbial-n was highest in May and then decreased after water irrigation. The population of aerobic soil microorganisms were steeply decreased after water submerging Soil microorganisms was decreased with the increased the soil depth. A month was needed for the seedling establishment in a no-tillage rice-wheat cropping system. Increased cropping years improved leaf greenness and leaf area index(LAI). But stomatal conductance(Gc) was higher in conventional cultivation system than no-till system. Stomatal conductance at panicle initiation stage was increased higher in conventional condition of leaves but the difference between conventional and no-till system was increased at heading stage. In no-till 4 years condition rice grain yield was spikelet numbers per panicle.

• 패션비즈니스
• /
• 제19권2호
• /
• pp.23-35
• /
• 2015

In this study, the effect of shrink-resist treatment agent on the wool finishing, specifically anti-felting of wool product was studied. We aimed at providing preliminary data leading to the diversification of high-value added fashionable wool product. Two type of wool fabrics, dense and sheer, were employed. The fabric specimens were treated with solutions of shrink-resist treatment agent with wet pick-up rate 110%, 130%, and 150%, respectively, by using a padding mangle. The solution treated fabric specimens were then dried at room temperature first, at $90^{\circ}C$ for 15 minutes in a drying oven, and finally cured at $130^{\circ}C$ for 3 minutes. Cured wool fabric specimens were then subjected to a felting process. The physical and mechanical properties, including shrinkage rate along warp/filling direction, thickness at specified measurement pressure, drape stiffness, and air-permeability, were analyzed. After felting process, the shrinkage rates of wool fabric specimens, treated with shrink-resist treatment agent, were lower than those of control wool fabric specimens. The stiffness values of wool fabric specimens measured by using Flexometer were increased.

• 보존과학회지
• /
• 제37권4호
• /
• pp.340-356
• /
• 2021

We have tried the experimental research of lost-wax casting to reconstruct Gilt-Bronze Pensive Bodhisattva; preliminary and reconstruction experiment based on ancient texts. Main object to reconstruct is Korean National Treasure No.83, Gilt-Bronze Pensive Bodhisattva (Maitreya), then we measure alloy ratio and casting method based on the scientific analysis. Other impurities were removed from the base metal components(copper : tin : lead) and their ratio was set to 95.5 : 6.5 : 3 where the ratios for tin and lead were increased by 2.5% each. The piece-mold casting method was used, and piece-mold casting experiments were carried out twice in this study but supplementary research on piece-mold casting was necessary. The microstructure was confirmed to be typical cast microstructure and the component analysis result was similar to that of the prior study. Analysis of the chemical composition is confirmed to copper, tin, lead, and zinc, and the chemical composition of the matrix was 87.8%Cu-7.5%Sn-2.7%Pb-2.1%Zn, and similar to previous experimental research. Also resulted in the detection of small impurity in Zn. Analysis of the mould revealed that the mould was fabricated by adding quartz and organic matter for structural stability, fire resistance, and air permeability. We expect that our research will contribute to provide base data for advanced researches in future.

• Safety and Health at Work
• /
• 제14권1호
• /
• pp.107-117
• /
• 2023

Background: Thermophysiological comfort in a cold environment is mainly ensured by clothing. However, the thermal performance and protective abilities of textile fabrics may be sensitive to extreme environmental conditions. This article evaluated the thermal insulation properties of three technical textile assemblies and determined the influence of environmental parameters (temperature, humidity, and wind speed) on their insulation capacity. Methods: Thermal insulation capacity and air permeability of the assemblies were determined experimentally. A sweating-guarded hotplate apparatus, commonly called the "skin model," based on International Organization for Standardization (ISO) 11092 standard and simulating the heat transfer from the body surface to the environment through clothing material, was adopted for the thermal resistance measurements. Results: It was found that the assemblies lost about 85% of their thermal insulation with increasing wind speed from 0 to 16 km/h. Under certain conditions, values approaching 1 clo have been measured. On the other hand, the results showed that temperature variation in the range (-40℃, 30℃), as well as humidity ratio changes (5 g/kg, 20 g/kg), had a limited influence on the thermal insulation of the studied assemblies. Conclusion: The present study showed that the most important variable impacting the thermal performance and protective abilities of textile fabrics is the wind speed, a parameter not taken into account by ISO 11092.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.140-144
• /
• 2012

Ga-doped ZnO (GZO) was a limit of application on the photovoltaic devices such as CIGS, CdTe and DSSC requiring high process temperature, because it's electrical resistivity is unstable above 300 ℃ at atmosphere. Therefore, ZTO (zinc tin oxide) was introduced in order to improve permeability and thermal stability of GZO film. The resistivity of GZO (300 nm) single layer increased remarkably from 1.8 × 10-3Ωcm to 5.5 × 10-1Ωcm, when GZO was post-annealed at 400 ℃ in air atmosphere. In the case of the ZTO (150 nm)/GZO (150 nm) double layer, resistivity showed relatively small change from 3.1 × 10-3Ωcm (RT) to 1.2 × 10-2Ωcm (400 ℃), which showed good agreement with change of carrier density. This result means that ZTO upper layer act as a barrier for oxygen at high temperature. Also ZTO (150 nm)/GZO (150 nm) double layer showed lower WVTR compared to GZO (300 nm) single layer. Because ZTO has lower WVTR compared to GZO, ZTO thin film acts as a barrier by preventing oxygen and water molecules to penetrate on top of GZO thin film.

• 한국의류산업학회지
• /
• 제25권1호
• /
• pp.62-71
• /
• 2023

Recently, interest in natural fabric materials that are not harmful has increased, and hemp is being studied as a new eco-friendly product. This study produced hemp fabric with improved flexibility and increased antibacterial properties by blending it with Hanji yarn. Various weaving methods were proposed to overcome the rough physical properties of hemp, and the functions of the developed products were evaluated through antibacterial tests. The mixing ratios of hemp and Hanji yarns was 50% hemp: 50% Hanji weft, 70% hemp: 30% Hanji weft, 30% hemp: 70% Hanji weft, and 100% hemp. Overall, the higher the ratio of Hanji yarn, the higher the fastness property, and the higher the ratio of hemp yarn, the higher the flexibility of the fabric, which was evaluated to be comfortable to wear. The 99.9% antibacterial properties of hemp products were considered to contribute to maintaining the health of modern people. Owing to its high intensity and high air permeability, it is considered highly usable in the production of children's clothing with a lot of activity. It was evaluated as an advantage that the disadvantage of hemp, which was limited as a material for summer clothing, was broadened to use for all seasons due to the fusion of Hanji. Otherwise, low consumer satisfaction as an outdoor wear is a disadvantage because hemp products had low elasticity and wrinkles.

• 공업화학전망
• /
• 제14권3호
• /
• pp.25-36
• /
• 2011

압축공기 중의 수분은 공압설비의 모든 요소에 중대한 해를 입히며 밸브의 고착, 계기의 막힘 또는 공압기기의 오작동을 일으키며 생산하는 제품의 질에 있어서도 많은 해를 입혀서 제품의 질을 떨어뜨리는 역할을 하게 된다. 따라서 수분을 제거하는 방법이 필요하며 기존의 냉동식 및 흡착식을 대신하여 분리막 법이 적용될 수 있다. 현재 제습용 기체분리막 모듈은 적용이 시작된 단계에 있다. 제습용 기체분리막은 의료기기, 분석기기, Instrument air 장비에 응용이 진행되고 있다. 최근 들어 선진각국 뿐만 아니라 국내에서도 막소재 개발, 복합막 개발, 모듈 개발, 시스템 설계 및 제작 기술 개발이 진행되고 있다. 현재로서는 제습막공정에 적합한 막소재의 개발이 시급하지만 이후 적용확대를 위해서는 제습용 기체분리막의 신뢰성 향상을 위한 다각도의 노력이 필요하다.

• 전기화학회지
• /
• 제6권1호
• /
• pp.41-47
• /
• 2003

본 연구에서는 중저온에서 작동되는 연료극 지지체식 평판형 연료전지를 연구하였으며, 저가의 공정인 테입케스팅법을 이용하여 $0.8\~1mn$의 두께와 $25,\; 100,\;150cm^2$크기의 평판형 연료극 지지체를 제작하였고, 연료극 지지체의 특성을 확인하기 위해서 기공률, 가스 투과율 그리고 전기전도도 등을 측정하였다. $12wt.\%$의 결합제를 사용하여 제작된 지지체의 기공률은 $45.8\%$이고 환원 시 $53.9\%$로 증가함을 보였다. 연료극 지지체는 $850^{\circ}C$에서 900S/cm의 높은 전기전도도를 나타내었으며, 1기압 하에서 공기로 측정하였을 때 6l/min의 기체투과량을 보였다. 단전지의 제조는 테잎케스팅 법으로 제조된 연료극 지지체위에 슬러리 디핑 코팅법을 이용하여 전해질과 공기극을 순차적으로 제조하였다. YSZ의 농도를 $10wt.\%\;와\;20wt.\%$로 하여 제조된 전해질의 두께는 각각 form와 300m이었고, 공기극은 LSM-YSZ/LSM/LSCF의 다층 구조로 구성되었다. $10{\mu}m$두께의 전해질은 매우 치밀하였고 3기압 하에서 가스 투과도는 2.5ml/min을 나타내었다. 단전지의 성능 시험에서 $20\~30{\mu}m$두께의 전해질을 갖는 연료극 지지체식 평판형 연료전지는 $750^{\circ}C$에서 0.6V, $300 mA/cm^2$성능을 보였다.

• Korean Chemical Engineering Research
• /
• 제59권4호
• /
• pp.548-556
• /
• 2021

본 연구는 부직포의 환경오염 문제를 해결하기 위하여 리그노셀룰로오스 섬유와 야자각 활성탄(CSA)을 이용한 미세먼지-저감 여과필터의 제조 가능성을 조사하였다. CSA의 경우, 휘발성 유기화합물(VOC)과 유해금속의 저감을 위한 여과필터 제조용 원료로서 적용 가능성을 확인하였으며, CSA의 VOC 저감효과는 목섬유보다 5배 이상으로 측정되었다. 돈모, 인모, 돈혈과 같은 단백질계 원료와 낙엽송 수피 열수 추출물을 이용하여 조제한 천연접착제를 적용하여 최소 200 kg/m³의 목표밀도와 함께 최대 40 wt%의 CSA로 제조된 섬유판은 취급이 가능한 강도를 보유한 것으로 나타났다. 그러나 이 조건에서 제조된 섬유판의 경우, 통기성이 낮아 이를 해결하기 위하여 통기구를 가진 섬유판의 제조가 요구되었다. 활성탄으로 사용한 CSA는 강도 및 성형성을 고려하여 입자의 크기는 2 mesh 이상으로 조절이 필요하였고, 표층에는 목섬유만 심층에는 목섬유와 활성탄으로 구성된 3층 섬유판으로 제조하는 방안이 최적조건으로 도출되었다. 한편 필터지(한지)는 우수한 미세먼지 여과능을 가진 것으로 조사되었으며, 결과적으로 타공 섬유판과 함께 한지로 구성된 여과필터 세트가 부직포로 생산되고 있는 기존 여과필터를 대신하여 실내외 공간에 존재하는 미세먼지외에 VOC와 유해금속 등의 저감장치용 여과필터로서 사용이 가능한 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제30권1호
• /
• pp.37-47
• /
• 2014

불포화 수리전도도는 Mualem 모세관 모델에 의하여 이론적으로 함수특성곡선으로부터 적분된다. 하지만 예측된 수리전도도는 포화 부근에서 모관흡수력의 미소한 변화에도 극도로 민감하다. 원활한 형태의 함수특성곡선에 의한 Mualem 수리전도도는 포화 부근에서 급격하게 감소하며, 수리적 거동을 신뢰할 수 있게 모델하지 못하거나 수치해의 안정성을 저해 한다. van Genuchten-Mualem(VGM) 수리전도도를 개선하기 위하여, 낮은 모관흡수력 수준에 있는 임의의 공기함입치이내에서 van Genuchten 함수특성곡선을 수정하였다. 수정 VG 곡선은 대수축에서 임의의 공기함입치에서 포화상태까지 선형화된다. 수정 VG 함수특성곡선은 실제 함수특성거동의 회귀분석에 영향을 끼치지 않으며 원래의 VG 함수특성곡선의 계수를 그대로 사용한다. 수정 VG 곡선을 이용하여, VGM 수리전도도는 임의의 공기합입치를 기준으로 구간별 적분하여 수정되었다. 수정 VGM 수리전도도가 해석적 해로 제안되었으며, 포화부근 영역에서 수리전도도가 급격하게 감소하는 현상이 제거되었다. 실제 사면의 2차원 침투해석을 통하여 VGM 수리전도도와 제안된 모델에 따른 수리거동을 비교하였다. 제안된 모델은 여러 강우조건에 따른 해의 수렴성을 확보하였지만, VGM 수리전도도를 적용하면, 포화부근의 수리전도도가 급격하게 감소하여 강우량이 많은 경우 해가 수렴하지 않았다. 특히 선행강우에 의한 초기 안전율과 집중강우 후 최종 안전율을 크게 평가할 수 있었다. 제안된 수리전도도 모델은 침투해석과 안정해석을 통하여 실제 사면의 붕괴를 재현할 수 있었다.