• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 Energy Saving Membrane Separtion Systems 에너지 절약형 막분리 시스템
• /
• pp.93-116
• /
• 1999

MF membrane element was specially designed for water purification and VSA process which can solve the fouling problem. Especially VSA process is developed for the SK Chemicals' asymmetric microfiltration hollow fiber membranes. In case of outside-to-in filtration process, MF membrane element showed the excellent flux stability caused by cleaning ability of VSA process . Simultaneous back-washing with VSA consideratbly enhances cleaning efficiency. From the result the possibility of the replacement of chemical coagulation and sand filtration process with newly developed VSA process was revealed.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 하계학술발표대회 논문집
• /
• pp.83-83
• /
• 2007

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.179-182
• /
• 2003

This paper describes the design and implementation of PLC home network system using HNCP ver.1.0. The developed home network system comprises a home server progranL a home master, and appliance emulators (e.g., for washing machine, microwave oven, and air-conditioner). Throughout the implementation of PLC home network system, the feasibility of HNCP ver.1.0 is verified.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.63-66
• /
• 1999

MF membrane element was specially designed for water purification and VSA process which can solve the fouling problem. Especially VSA process is developed for the SK Chemical's asymmetric microfiltration hollow fiber membranes. In case of outside-to-in filtration process, MF membrane element showed the excellent flux stability caused by cleaning ability of VSA process. Simultaneous back- washing with VSA considerably enhances cleaning efficiency. Form the result, the possibility of the replacement of chemical coagulation and sand filtration process with newly developed VSA process was revealed.

• 한국식품영양과학회지
• /
• 제39권12호
• /
• pp.1846-1853
• /
• 2010

본 연구에서는 증류수 및 전기분해수인 차아염소산나트륨수와 미산성차아염소산수를 이용한 신선초 세척방법이 녹즙의 저장 중의 일반세균수, pH, 색도, polyphenol 함량, 전자공여능 및 총 항산화력 변화에 미치는 영향을 분석하였다. 녹즙의 저장기간 중 일반세균수는 증류수 세척 방법에서 저장 24시간 만에 식품공전에서 기준치로 제시한 $10^5$ CFU/mL보다 높은 균수를 보인 반면 전기분해수 세척방법에서 저장 4일이 지나도 $10^5$ CFU/mL 이하의 균수가 유지됨을 확인할 수 있었다. 그리고 저장기간 동안 녹즙의 pH 및 색도는 모두 유의적인 차이를 나타내지 않고 일정범위에서 유지되었으며, 녹즙의 항산화성은 polyphenol 함량, 전자공여능 및 총 항산화력 모두 세척방법 간 유사한 결과를 나타내었고, 저장일수가 증가할수록 감소하는 유사한 경향을 나타내어 녹즙의 저장 중 전기분해수에 의한 영향을 나타내지 않았다. 이는 신선초에 대한 전기분해수 세척 방법이 녹즙의 미생물학적 위험은 감소시키면서 품질에는 영향을 나타내지 않는 결과라고 생각되며, 이는 전기분해수 세척 방법이 녹즙의 품질 및 저장성 향상에 기여할 것으로 생각된다.

• 생명과학회지
• /
• 제22권12호
• /
• pp.1665-1671
• /
• 2012

본 연구는 양파껍질로부터 건강기능성식품 기능성원료로서의 양파껍질추출물의 표준화공정을 설정하고자 하였으며, 제조과정 중 지표물질의 추출효율 증대 및 잔류농약 안정성 확보를 위해 여러 세척공정을 통한 quercetin 함량 및 잔류농약 잔존율을 분석하였다. 양파껍질(A)을 1차 1종세척제(이하 세척제) 수세후 건조한 처리구(B), 2차 세척제 처리구(C), 초음파+세척제 처리구(D), 과산화수소+세척제 처리구(E) 및 데치기+세척제 처리구(F)로 처리한 다음 주정추출후 농축 및 진공동결건조하여 양파껍질추출분말을 제조하였다. 양파껍질추출물의 수율 및 지표물질인 quercetin의 수율을 고려하면 과산화수소처리+세척제 처리구(E)가 B처리구에 비해 각각 89.04% 및 96.84%로 추출효율이 가장 높게 나타났다. 모든 시료에서 총 177종의 농약성분 중 cyhalothirn, fluquinconazole 및 procymidone, 3종만이 검출되었는데, cyhalothirn (생양파 허용기준; 0.5 mg/kg), fluquinconazole (0.2 mg/kg)은 각각 0.37-0.68 mg/kg 및 0.35-3.28 mg/kg으로 농축도(27-60배)를 고려하면 허용기준에 안정하였으나 procymidone은 함량이 128.01~133.67 mg/kg으로 높았다. 따라서 양파껍질추출물의 표준화공정을 위해서는 추가적인 물리적 전처리 공정이 필요한 것으로 사료되었다.

• 대한영양사협회학술지
• /
• 제23권4호
• /
• pp.350-362
• /
• 2017

The study examined evaluated the sanitation management state of the high school foodservice operations, as measured by temperature, humidity and airborne bacteria concentration in functional areas and further identified their relationships. Data were collected from 26 high school foodservices in Gyeonggi Province. Statistical analyses were conducted with the SPSS program using descriptive analysis and spearman's correlation. The sanitation management performances in high school foodservice scored 86.85 out of 100 points and showed higher scores in the dimensions of preparation and storing management (17.85/20 points), operation management (17.78/20 points), and cooking utensil management (17.62/20 points), while the dimensions of cross contamination management as well as personal hygiene management needed action plans for prompt improvement. The airborne bacteria concentration was highest in the dining area (179.2 CFU/plate), and requiring action plans for improvement. The relative humidity in functional areas ranged from 66.5% in the receiving area to 74.4% (dish-washing area) and the temperature of the preparation area showed an average of $25.1^{\circ}C$ with the highest of $35.4^{\circ}C$ in the dish-washing area. In terms of the relationships among airborne bacteria, temperature, and humidity, the concentration of airborne bacteria was negatively correlated with and temperature in the dish-washing area (r= -0.693, P<0.05), and no other significances were shown in the other areas.

• 한국의상디자인학회지
• /
• 제24권2호
• /
• pp.1-10
• /
• 2022

The purpose of this study is to analyze the structural properties of 100% wool fabrics knitted with various stitch types and to evaluate dimensional stability from shrinkage in wet cleaning and drying. Materials were weft-knitted from twenty-four different stitches with 7 gauge using a computerized flatbed knitting machine. Weight, thickness, density, and length were measured. A domestic washing machine and a tumble dryer were used for the shrinkage test. The results are as follows: Knitted fabrics were divided into 3 groups based on weight per unit area. Porous knits show light weight whilst milano, pintuck, rib stitches belong to the heaviest group. A positive correlation between weight and thickness was found and the same result was obtained for wale density and weight. Dimensional shrinkage of knitted fabrics was increased during repetitive wet cleaning and drying regardless of knit stitches. Especially, fabrics knitted with float, tuck, cable, and links & links stitches samples were contracted more than 15% in the first treatment whereas 2x1 rib stitch showed 1% shrinkage rate. Fisherman and milano stitches contracted in both course and wale direction with similar shrinkage rates. However, porous knits with float and tuck stitches shrank in course direction by 20% as well as cable samples contracted from 5% to 20% after repeated washing and drying. On the other hand, 30% and 15% contraction of wale direction occurred in orderly float and links & links stitches, respectively. Machine dried knits have a higher shrinkage rate than air-dried knits, but the drying method did not affect to the direction of contraction. In conclusion, variations of knit, tuck, and float stitches affect knit construction and dimensional stability from shrinkage in wet cleaning and drying of wool knitted fabrics.

• 한국농공학회논문집
• /
• 제64권6호
• /
• pp.77-86
• /
• 2022

Various odor reduction systems are being operated at pig houses to improve livestock odor issues. However, the quantitative evaluation of odor reduction efficiency is not sufficiently conducted. The analysis of factors that affect the reduction efficiency also has not been sufficiently conducted. Therefore, in this study, the reduction efficiency of representative odor reduction facilities (bio-curtain, scrubber) operated by domestic pig houses was evaluated. The odor reduction efficiency was evaluated by sampling the air before and after the odor reduction facility in 6 pig houses. Livestock odors were evaluated for complex odors, ammonia, hydrogen sulfide, and VOC. To find factors for reduction efficiency, temperature, humidity, pH of washing resolution, type of washing water, and ventilation rate was measured. As a result, it was found that the scrubber system had the highest reduction efficiency. The reduction efficiency was found to be affected by the scrubber's washing resolution, filler, operating conditions, and size. Bio-curtains may have problems such as deterioration of fan performance due to ventilation fan load, groundwater pollution, and excessive use of groundwater.

• Membrane and Water Treatment
• /
• 제9권1호
• /
• pp.43-51
• /
• 2018

Hollow fiber (HF) membranes are gaining wide interest over flat membranes due to their compaction and high area to surface volume ratio. This work addresses the fabrication of HF from polysulfone (PS) and polyethersulfone (PES) using N-methylpyrrolidone (NMP) as solvent in addition to other additives to achieve desired characteristics. The semi-pilot spinning system includes jacketed vessel, four spinneret block, coagulation and washing baths in addition to dryer and winder. Different parameters affecting dry-wet spinning phase inversion process were investigated. Dope compositions of PES, NMP and polyvinyl pyrrolidone (PVP) of varying molecular weights as additive were addressed. Some critical parameters of importance were also investigated. Those include dope flow rate, air gap, coagulation & washing baths and drying temperatures. The measured dope viscosity was in the range from 1.7 to 36.5 Pa.s. Air gap distance was adjusted from 20 to 45 cm and coagulation bath temperature from 20 to $46^{\circ}C$. The HF membranes were characterized by scanning electron microscope (SEM), atomic force microscope (AFM) and mechanical properties. Results indicated prevalence of finger like structure and average surface roughness from about 29 to 78.3 nm. Profile of stress strain characteristics revealed suitability of the fibers for downstream interventions for fabrication of thin film composite membrane. Different empirical correlations were formulated which enable deeper understanding of the interaction of the above mentioned variables. Data of pure water permeability (PWP) confirmed that the fabricated samples fall within the microfiltration (MF)-ultrafiltration (UF) range of membrane separation.