• 한국경제지리학회지
• /
• 제11권1호
• /
• pp.59-77
• /
• 2008

자동차를 중심으로 하는 도로교통량이 크게 늘면서 교통에 기인한 다양한 피해 현상들이 나타나고 있다. 특히 교통량이 집중되는 대도시에서는 교통에 기인한 도시민의 건강피해가 심각한 것으로 밝혀지고 있다. 본 연구에서는 교통에 기인한 미세먼지의 피해를 직접적으로 받는 도시인구는 미세먼지의 주 발생원인 교통흐름이 있는 도로변에 가까이에 노출되는 도시민들이라고 보고 도시 공간 내에서 교통흐름과 미세먼지, 그리고 도시 통행인구의 공간적 분포를 분석하였다. 특히 본 연구에서는 대기오염문제가 심각한 서울을 대상으로 교통에 기인한 미세먼지의 실태를 살펴보고, 서울을 둘러싸고 있는 경기도 일대에 대단위 주거지들이 밀집된 신도시들이 개발되면서 나타나는 인구분포와 통행패턴, 그리고 교통흐름 및 미세먼지 농도에 나타나는 공간적 변화와 이들 간의 공간적 관계를 종합적으로 파악하기 위하여 GIS를 적용하였다. 또한 교통카드 트랜잭션 데이터베이스에서 데이터마이닝기법으로 추출해낸 통행흐름 자료를 이용하여 통행시간별 통행인구분포도를 작성하고, 이를 바탕으로 교통에 기인한 미세먼지에 직접 노출하게 되는 도시인구를 산정하는 시 공간적 모형개발을 시도하였다.

• 한국대기환경학회지
• /
• 제34권1호
• /
• pp.38-55
• /
• 2018

Hourly measurements of $PM_{2.5}$ mass, organic and elemental carbon (OC and EC), and water-soluble ionic species were made at the air quality intensive monitoring stations in Baengryeongdo (BR) and Seoul (SL) during the winter (December 01~31, 2013) and summer (July 10~23, 2014) periods, to investigate the increase of $PM_{2.5}$ and secondary ionic species and the reasons leading to their increase during the two seasons. During winter, $PM_{2.5}$ and its major chemical species concentrations were higher at SL than at BR. Contribution of organic mass to $PM_{2.5}$ was approximately 1.7 times higher at BR than at SL, but the $NO_3{^-}$ contribution was two times higher at SL. Total concentration of secondary ionic species ($SO{_4}^{2-}$, $NO_3{^-}$, and $NH_4{^+}$) at BR and SL sites accounted for 29.1 and 40.1% of $PM_{2.5}$, respectively. However, during summer, no significant difference in chemical composition of $PM_{2.5}$ was found between the two sites with the exception of $SO{_4}^{2-}$. Total concentration of the secondary ionic species constituted on average 43.9% of $PM_{2.5}$ at BR and 53.0% at SL. A noticeable difference in chemical composition between the two sites during summer was attributed to $SO{_4}^{2-}$, with approximately twofold concentration and 10% higher contribution in SL. Low wind speed and high relative humidity were important factors in secondary formation of water-soluble ionic species during winter at SL, resulting in $PM_{2.5}$ increase. While the secondary formation during summer was attributed to strong photochemical processes in daytime and high relative humidity in nighttime hours. The increase of $PM_{2.5}$ and its secondary ionic species during the winter haze pollution period at SL was mainly caused either by long-range transport (LTP) from the eastern Chinese regions, or by local pollution. However, the increased $SO{_4}^{2-}$ and $NO_3{^-}$ during summer at SL were mainly caused by LTP, photochemical processes in daytime hours, and heterogeneous processes in nighttime hours.

• 한국전기전자재료학회논문지
• /
• 제24권12호
• /
• pp.1018-1022
• /
• 2011

Nowadays, with improvement of economical income and life qualities, life pattern changes have been brought such as increasing of avocational activities. Consequently, following those life trends, utilization of car is getting increased. Thus, the perceptions of car have been changed from the only means of transport in the past to a 2nd residental space. that is why the car's endo environmental factors are getting so important. Air conditioner regulating air ventilization in vehicle's indoor automatically sets the right temperature based on the differences of indoor and outdoor's temperature with development of advanced functions to provide better environmental qualities in vehicle. However, even those advanced techniques for functional development are got so diverse though, the essential technique for preventing the growth of bateria and mold inside of the air conditioner are not even severals. Especially, evaporator one of the vehicle air conditioning equipments generates cooled air by vaporizing refrigerant in liquid state with the water as the adduct for this reactions. It has structural difficulties for water vaporation then cause the growth of germs. That's why this reseach was focused on the way of eliminating germs in the vehicle air conditioner efficiently. Direct air sterilizer by using UVC(Ultraviolet C) is manufactured and that performances are evaluated.

• 한국대기환경학회지
• /
• 제31권5호
• /
• pp.430-436
• /
• 2015

Numerical air quality forecasting suffers from the large uncertainties of input data including emissions, boundary conditions, earth surface properties. Data assimilation has been widely used in the field of weather forecasting as a way to reduce the forecasting errors stemming from the uncertainties of input data. The present study aims at evaluating the effect of input data on the air quality forecasting results in Korea when data assimilation was invoked to generate the initial concentrations. The forecasting time was set to 36 hour and the emissions and initial conditions were chosen as tested input parameters. The air quality forecast model for Korea consisting of WRF and CMAQ was implemented for the test and the chosen test period ranged from November $2^{nd}$ to December $1^{st}$ of 2014. Halving the emission in China reduces the forecasted peak value of $PM_{10}$ and $SO_2$ in Seoul as much as 30% and 35% respectively due to the transport from China for the no-data assimilation case. As data assimilation was applied, halving the emissions in China has a negligible effect on air pollutant concentrations including $PM_{10}$ and $SO_2$ in Seoul. The emissions in Korea still maintain an effect on the forecasted air pollutant concentrations even after the data assimilation is applied. These emission sensitivity tests along with the initial condition sensitivity tests demonstrated that initial concentrations generated by data assimilation using field observation may minimize propagation of errors due to emission uncertainties in China. And the initial concentrations in China is more important than those in Korea for long-range transported air pollutants such as $PM_{10}$ and $SO_2$. And accurate estimation of the emissions in Korea are still necessary for further improvement of air quality forecasting in Korea even after the data assimilation is applied.

• 한국지반공학회논문집
• /
• 제32권1호
• /
• pp.19-33
• /
• 2016

강우의 침투가 사면안정에 미치는 영향을 평가하기 위해 강우의 침투해석을 수행하고 그 결과를 한계평형해석에 적용하는 안정해석 절차가 널리 사용되고 있으나 지반은 흙 입자, 물과 공기로 이루어진 3상의 물질이므로 사면을 통한 강우의 침투를 엄밀하게 해석하기 위해서는 물, 공기의 흐름과 흙의 응력-변형거동이 완전 연관된(fully coupled) 식을 고려해야 한다. 본 연구에서는 공기와 물의 흐름이 사면의 역학적 안정에 미치는 영향을 연구하기 위하여 우리나라에 널리 분포하는 풍화잔류토 사면에 대하여 3상이 연동된 흐름해석을 수행하였다. 강우침투가 사면안정에 미치는 영향을 평가하기 위하여 강도감소법에 의한 사면 안정해석을 수행하였다. 해석결과에 의하면 침투하는 강우가 공기를 밀어내 공기의 흐름이 발생하고 공기압이 증가하였다. 이러한 간극에서의 물과 공기의 상호작용은 사면의 응력-변형거동에 영향을 미쳐 공기의 흐름을 고려하지 않은 흙 입자-물의 연관해석의 결과와는 다른 사면안정 거동을 보였다.

• 한국항만경제학회지
• /
• 제37권4호
• /
• pp.13-31
• /
• 2021

2011년 한-유럽 FTA 체결 이후 두 지역의 거래액은 증가일로에 있으며 전체 시장은 지속적으로 확대되고 있다. 여러 운송수단을 이용하는 복합국제운송에 대한 관심이 늘어나며 기존의 해운운송 위주의 운송 방식에서 철도를 포함한 두 가지 이상의 운송수단을 사용하는 다중운송경로를 통한 운송이 확대되고 있다. COVID-19의 영향으로 2019년 세계 화물 시장이 타격을 받았는데 특히 해상 및 항공 노선의 급격한 제한에 기인하고 한국의 대유럽 수출도 감소하였다. 이러한 영향에도 2020년 CRE(China Railway Express) 화물 열차의 총 수는 2016년 대비 7.3배 증가한 12,406개 노선으로 전년 대비 50% 증가하였다. 철도를 이용한 육상기반의 화물운송에 대한 연구는 꾸준히 있어 왔으나 한국과 유럽의 운송노선에 대한 연구는 TSR(Trans Siberian Railway), 수에즈 해운(Suez Shipping), 기존 TCR(Trans China Railway) 노선에 국한되었다. 본 논문은 중국에서의 일대일로 구상에 따라 최근 변화를 겪고있는 실크로드의 핵심에 초점을 맞추어 중국-유럽 화물열차(CRE)를 대상으로 연구를 진행하였다. Fuzzy-AHP는 한국에서 유럽으로 가는 국제 복합항로 선정 시 요인의 우선순위를 결정하는데 사용하였으며 중국과 한국의 전문가 설문조사를 통해 결과를 도출하였다. 요인 선정 후 TOPSIS 방법을 적용하여 계획된 3개의 경로를 순위화하였다. 그 결과 총비용, 총시간, 서비스 신뢰도가 CRE 기반 복합운송을 선택할 때 의사결정자가 고려하는 요소로 나타났다. 또한, 주요 3개 복합운송노선에서 Route 1(인천-대련-만주-함부르크) 노선이 최적 노선이고 Route 2(인천-리차오-얼롄하오터-함부르크)와 Route 3(인천-롄윈강-시안-함부르크) 순서로 나타났다.

• 한국환경과학회지
• /
• 제21권7호
• /
• pp.815-824
• /
• 2012

The purpose of this study was to analyze the meteorological characteristics of wintertime high PM10 concentration episodes in Busan. $PM_{10}$ concentration has been reduced for the past four years and recorded near or exceeded 100 ${\mu}g/m^3$ (national standard of $PM_{10}$). High concentration episodes in Busan were 6 case, $PM_{2.5}/PM_{10}$ ratio was 0.36~0.39(mean 0.55). High $PM_{10}$ concentration occurred during higher air temperature, more solar radiation and sunshine, lower relative humidity, and smaller cloud amount. Synoptically, it also occurred when Busan was in the center or the edge of anticyclone and when sea breeze intruded. An analysis of upper air sounding showed that high $PM_{10}$ concentration occurred when surface inversion layer and upper subsidence inversion layer existed, and when boundary layer depth and vertical mixing coefficient were low. An analysis of backward trajectory of air mass showed that high $PM_{10}$ concentration was largely affected by long range transport considering that it occurs when air mass is intruded from China.

• 설비공학논문집
• /
• 제24권1호
• /
• pp.23-28
• /
• 2012

In the present work, numerical analyses of air flow in HVAC duct have been carried out for enhancement of cooling/heating performance. For the analyses, three-dimensional Reynolds-averaged Navier-Stokes equations have been solved with the shear stress transport turbulence model. The numerical results were validated in comparison with the experimental data. Based on the numerical results, the HVAC duct was designed to reduce the pressure loss. The modified duct geometry shows largely reduced pressure drop in comparison with the reference geometry. And, through modified duct shape, the performance of air conditioning has been enhanced.

• 한국대기환경학회지
• /
• 제19권3호
• /
• pp.249-261
• /
• 2003

A three-dimensional mesoscale atmospheric dispersion modeling system consisting of the Lagrangian particle dispersion model (LPDM) and the meteorological mesoscale model (MM5) was employed to simulate the transport and dispersion of non-reactive pollutant during the nuclear spill event occurred from Sep. 31 to Oct. 3, 1999 in Tokaimura city, Japan. For the comparative analysis of numerical experiment, two more sets of foreign mesoscale modeling system; NCEP (National Centers for Environmental Prediction) and DWD (Deutscher Wetter Dienst) were also applied to address the applicability of air pollution dispersion predictions. We noticed that the simulated results of horizontal wind direction and wind velocity from three meteorological modeling showed remarkably different spatial variations, mainly due to the different horizontal resolutions. How-ever, the dispersion process by LPDM was well characterized by meteorological wind fields, and the time-dependent dilution factors ($\chi$/Q) were found to be qualitatively simulated in accordance with each mesocale meteorogical wind field, suggesting that LPDM has the potential for the use of the real time control at optimization of the urban air pollution provided detailed meteorological wind fields. This paper mainly pertains to the mesoscale modeling approaches, but the results imply that the resolution of meteorological model and the implementation of the relevant scale of air quality model lead to better prediction capabilities in local or urban scale air pollution modeling.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1335-1340
• /
• 2007

The media transport systems, such as printers, copy machines, facsimiles, ATMs, cameras, etc. have been widely used and being developed rapidly. In the development of those sheet-handling machineries, it is important to predict the static and dynamic behavior of the sheet with a high degree of reliability because the sheets are fed and stacked at such a high speed. Flexible media are very thin, light and flexible, so they behave in geometric nonlinearity with large displacement and large rotation but small strain. In the flexible media analysis, aerodynamic effect from the surrounding air must be included because any small force can make large deformation. In this paper, surrounding air was modeled by incompressible Navier-Stokes flow and an arbitrary Lagranigan-Eulerian(ALE) finite element method with automatic mesh-updating technique was formulated for large domain changes. In the numerical simulations, the results with consideration of the air fast decayed and converged into static results while the results without considering air oscillated continuously.