• Spatial Information Research
• /
• v.14 no.3 s.38
• /
• pp.349-361
• /
• 2006

New directions on rural policy have been discussed due to the domestic and international environmental changes such as the price degradation of agricultural products, maintenance of rural landscape, and so on. Development of amenity in rural areas has been come out as the one of new policy directions. Amenity defines as, in a very broad way, the public benefits accruing from the condition of a place, such as aesthetic beauty, clean air and water, or good street lighting. Amenity in rural area is referred as a resource with a potential possibility for development. Among them rural landscape is regarded as the one of major resources. In Jeju, particularly, stone wall retains the most esthetic landscape in rural regions. In addition, the Ministry of Culture and Tourism appointed stone wall as the one of important components in rural landscape and one of the 100 national historic symbols. Stone wall in Jeju has its intrinsic and real value and is widespread in rural regions. However, in spite of it's popularity, the landscape of stone wall has been degraded without any concerns and has been partly destroyed. Landscape of stonewall should be maintained and the depth of concerns and systematic management measures for protection should be discussed. In this sense, the purpose of this paper, first of all, is to examine the status of stone wall and to evaluate the landscape of stone wall in Jeju. GIS is used as an analysis tool. Several areas such as Hankyung, Namyeup, and so on in Jeju are selected as the case areas for this study.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.89-94
• /
• 1997

A new type SO$_2$ gas sensor with a particular inorganic thin film on SAW devices was developed. The sensor consisted of twin SAW oscillators of the center frequency of 54 MHz fabricated on the LiTaO$_3$ piezoelectric single crystal. One delay line of the sensor was coated with a CdS thin film that selectively adsorbed and desorbed SO$_2$, while the other was uncoated for use as a stable reference. Deposition of the CdS thin film was carried out by the spray pyrolysis method using an ultrasonic nozzle. The sensor could measure the concentration in air less than 0.25 parts per million of SO$_2$. Stability of the sensor turned out to be as good as less than 20ppm, recovery time after each measurement was as short as 5 minutes. Repeatability of the measurement was confirmed through so many reiterated experiments. Hence, the SAW sensor developed through this work showed promising performance as a microsensing tool of SO$_2$. Further work required to improve the performance of the sensor includes enhancement of the reactivity of the CdS thin film with SO$_2$ through appropriate dopant addition, an increase of the center frequency of the SAW device.

• Journal of Gifted/Talented Education
• /
• v.25 no.1
• /
• pp.119-138
• /
• 2015

This study analyzed the academic achievements on above-level testing of mathematics, physics, chemistry, and English in newly entering students of science specialized high schools. It can be expected that newly students of science high specialized schools have reached ceiling level in the middle school mathematics and science academic scores. Above-level testing(or off-level testing) is a test tool used to evaluate student's ability which are above-grade level. In this study, above-level testing tools were used to develop the same type examination paper of the 2013 Korean College Scholastic Ability Test(CSAT) in mathematics, physics, chemistry, and English. The conclusions of this study were as follow: First, the academic achievement level of science specialized high school freshmen were higher the average level of general high school senior because that over 50% of them are within the 5 grade of CSAT in mathematics, physics, and chemistry. In English, 19.3% science specialized high school freshmen have reached within the 5 grade of CSAT. Second, as a result of examining characteristics of academic achievement with respect to units of subjects, in mathematics, it was showed that the academic achievement of 'continuity and limit of a function' unit was higher, 'statistics' unit was lower. In physics, the academic achievement of 'Electricity and Magnetism' unit was higher, 'Waves and particles' unit was lower. In chemistry, the academic achievement of 'compounds in life' unit was higher, 'Air' unit was lower. In English, the academic achievement of 'practical sentence' of reading area was higher, 'Sentence' of writing area was lower. In conclusion, above-level testing provided a good strategy for identifying and determining appropriate programming interventions for gifted students who are two or more grade levels above their age-mates in achievements, aptitude, or ability.

• The Korean Journal of Cytopathology
• /
• v.18 no.2
• /
• pp.119-125
• /
• 2007

Urine cytology is an important screening tool for urinary tract neoplasms. Liquid-based preparation methods, such as $ThinPrep^{(R)}$, have been introduced for non-gynecological samples. We aimed to assess the diagnostic accuracy of liquid-based preparations in urine cytology by comparing the results of the conventional Cytospin preparation method for the same samples. A total of 236 cases subject to urine cytology were enrolled in this study from January 2005 to December 2005. All cases were subjected to cystoscopy and if a malignancy was suspected, a biopsy was performed. Urine cytology slides were made using the $ThinPrep^{(R)}$ preparation method and the conventional Cytospin and/or direct smear method from the individual samples. The results of urine cytology were compared with the final cystoscopic or histological diagnoses. We analyzed the sensitivity, specificity, positive predictive value, negative predictive value and accuracy of both cytology preparation methods. A total of 236 slides made using the liquid based method were satisfactory for slide quality, whereas 5 slides (2.1%) prepared by conventional methods were unsatisfactory because of air-drying, a thick smear, or a bloody or inflammatory background. The $ThinPrep^{(R)}$ method showed 53.1% sensitivity, 92.6% specificity, a 92,6% positive predictive value, a 94.1% negative predictive value and 85,6% accuracy, while the conventional method showed 51% sensitivity, 98.4% specificity, a 92.6% positive predictive value, a 98.4% negative predictive value and 88,6% accuracy. Although the diagnostic values were equivalent between the use of the two methods, the quality of the cytology slides and the time consumed during the microscopic examination for a diagnosis were superior for the $ThinPrep^{(R)}$ method than for the conventional method. In conclusion, our limited studies have shown that the use of the liquid based preparation method is beneficial to improve the quality of slides and reduce the duration for a microscopic examination, but did not show better sensitivity, accuracy and predictive values.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.137-143
• /
• 2013

This study is to develop the production method of stepwise dilution gas for the evaluation of complex odor concentration by orifice tube. The basic orifice tube for 10 and 30 times of dilution sample was made at first, and with the combination of the basic orifice tubes we can continuously manufacture the stepwise dilution sample gas for air dilution sensory test ; 10, 30, 100, 300, 1,000, 3,000 times etc. The hole size of orifice tube was 0.84 mm for 10 times of dilution sample, and was 0.34 mm for 30 times. Dilution sample gas made with the basic orifice tube have an excellent reproducibility, 2%RSD. In addition, over 90% of correlation was shown between the sample made by the orifice tube and the sample by the syringe dilution method. Because there was no concentration drift of dilution gas with changes of connected pump flow, the basic orifice tube could be mounted directly with a vacuum suction box, and could be used simply as a tool for the evaluation of odor, especially on site.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.76-82
• /
• 2005

Evaporative cooling pad system is one of the main cooling methods in greenhouses and its efficiency is very high. However, it has some disadvantages such as greenhouse temperature distributions are not uniform and installation cost is expensive. In this study, a CFD simulation model f3r predicting the air temperature distribution in the fan and fad cooling greenhouse was developed. The model was calibrated and validated against experimental data and a good fit was obtained. The influence of different outside wind, fan and pad height, ventilation rate, shading, and greenhouse length, were then examined. In order to reduce the internal temperature gradients, it is desired that the prevail wind direction and the fan and pad heights are considered. The simulation indicates that high ventilation rates and shading contribute to reduce the temperature gradients in the fan and pad cooling greenhouse. In order to maintain the desired greenhouse temperature, the pad-to-fan distance should be restricted according to the design climate conditions, shading and ventilation rates. The developed CFD model can be a useful tool to evaluate and design the fan and pad systems in the greenhouses with various configurations.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.87-92
• /
• 2010

As the Concept "how environmental friendly" becomes more and more important in road construction. However, so far there is no estimation method. Environmental friendly concept can be incorporated at the plan level in order to influence decision making, and support policies that affect environment. The overall goal of this study was to develop environmental friendly concept measures for the national highway and to develop a methodology to implement a more environmental friendly concept. The research identified 8 performance measures through a project analysis that could address environmental impact assessment system's ten strategic goals - Topography, Wildlife, hydrology, landuse, air quality, water quality, soil, waste, noise, landscape. The qualitatively and quantitatively evaluation approach was selected as the decision support framework and performance measure were investigated using the AHP(Analytic Hierarchy Process) and pilot corridor for a 10 section and calculate the index values. The methodology was applied to a pilot corridor comprised of a 120km section of national highway in korea. The methodology made it possible to identify the specific performance measures that need improvement to enhance the overall environmental friendly concept. It is fairly intuitive, based on readily available data, and is easy to apply. It provides a powerful tool for government to assess the relative environmental friendly conceptof their transportation corridors now and in the future. It allows for comparisons within a corridor and with other corridors and identifies the improvements needed to enhance the environmental friendly concept.

• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.27-33
• /
• 2016

The use of cardiac angiography (CA) and the interventional procedures is rapidly increasing due to the increase in modern adult diseases. Cardiovascular intervention (CI) is an examination method where radiation is applied to the same area for a long period, and thus may cause skin injury. In this study, we investigate the diagnostic reference level (DRL) of the cardiovascular intervention (CI) carried out by medical institutions and use it as a tool to reduce patient exposure dose. In this study, the DRL was set by acquiring information about the cumulative fluoroscopy time, cumulative fluoroscopy dose-area product (DAP), radiography DAP, cumulative DAP, air kerma, number of video clips, and the total number of images from the cardiac angiography and interventional procedures performed on 147 patients. The DAPs corresponding to the DRL of cardiac angiography(CA) and that of the interventional procedures were shown to be $44.4Gy{\cdot}cm2$ and $298.6Gy{\cdot}cm2$, respectively; the corresponding DRLs of fluoroscopy time were shown to be 191.5s and 1935.3s, respectively. A DRL is not a strict upper bound for radiation exposure. However, the process of setting, enacting, and reviewing the DRLs for the dose by medical institutions will contribute to a reduction in the unnecessary exposure dose of patients.

• Journal of Environmental Health Sciences
• /
• v.47 no.2
• /
• pp.155-165
• /
• 2021

Objectives: Acute exposure to high concentrations of chemicals can occur when a chemical accident takes place. As such exposure can cause ongoing environmental pollution, such as in the soil and groundwater, there is a need for a tool that can assess health effects in the long term. The purpose of this study was assessing the health risks of residents living near a chemical accident site due to long-term exposure while considering the temporal concentration changes of the toxic chemicals leaked during the accident until their extinction in the environment using a multimedia environmental dynamics model. Methods: A health risk assessment was conducted on three cases of formaldehyde chemical accidents. In this study, health risk assessment was performed using a multimedia environmental dynamics model that considers the behavior of the atmosphere, soil, and water. In addition, the extinction period of formaldehyde in the environment was regarded as extinction in the environment when the concentration in the air and soil fell below the background concentration prior to the accident. The subjects of health risk assessment were classified into four groups according to age: 0-9 years old, 10-18 years old, 19-64 years old, and over 65 years old. Carcinogenic risk assessment by respiratory exposure and non-carcinogenic risk assessment by soil intake were conducted as well. Results: In the assessment of carcinogenic risk due to respiratory exposure, the excess carcinogenic risk did not exceed 1.0×10-6 in all three chemical accidents, so there was no health effect due to the formaldehyde chemical accident. As a result of the evaluation of non-carcinogenic risk due to soil intake, none of the three chemical accidents had a risk index of 1, so there was no health effect. For all three chemical accidents, the excess cancer risk and hazard index were the highest in the age group 0-9. Next, 10-18 years old, 65 years old or older, and 19-64 years old showed the highest risk. Conclusion: This study considers environmental changes after a chemical accident occurs and until the substance disappears from the environment. It also conducts a health risk assessment by reflecting the characteristics of the long-term persistence and concentration change over time. It is thought that it is of significance as a health risk assessment study reflecting the exposure characteristics of the accident substance for an actual chemical accident.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.382-392
• /
• 2018

Objective: Allergic diseases such as asthma due to fungal exposure in houses have increased, and proper management is urgent. Mold can grow in the air, floor, walls, and other areas according to environmental conditions, and there are many limitations to the conventional methodology for examining fungal exposure. For this reason, the degree of fungal contamination is being evaluated by ERMI (Environmental Relative Moldiness Index), a quantitative analysis method proposed by the EPA. In this study, we compared ERMI values between water-damaged dwellings and non-damaged ones to evaluate the effectiveness of Korean ERMI values. We also explored the association of ERMI values with the level of airborne mold and characteristics of dwellings. Methods: Floor dust was collected after installing a Dustream collector on the suction port of a vacuum cleaner. The collected samples were filtered to remove only 5 mg of dust, and DNA was extracted using the FastDNA SPIN KIT protocol. Results: The ERMI values were found to be 19.6 (-6.9-58.8) for flooded houses, 7.5 (-29.2-48.3) for leaks/condensation, and 0.8 (-29.2-37.9) for non-damaged dwellings. The airborne concentration of mold for flooded, leakage or condensed, and non-damaged houses were $684CFU/m^3$, $566CFU/m^3$, and $378CFU/m^3$, respectively. The correlation between ERMI values and the levels of airborne mold was low (R = 0.038), but a weakly significant association of the ERMI values with the concentration of particulate matter ($PM_{10}$) was observed as well(R=0.231,P<0.05). Conclusions: Our findings show that the reference value using ERMI can be used to distinguish water-damaged and non-damaged dwellings. It is believed that ERMI values could be a promising tool for assessing long-term fungal exposure in dwellings.