• 플랜트 저널
• /
• 제15권4호
• /
• pp.30-35
• /
• 2019

미세먼지 감축에 대한 사회적 요구 증가와 강화되는 대기오염물질 배출허용기준을 충족시키기 위해 구조적 제약조건을 갖는 500 MW급 석탄화력발전소 탈황설비의 성능개선 방안을 제시하였다. 탈황설비 흡수탑을 통과하는 배기가스가 선회하도록 내부 설비를 개조하여 난류를 형성시켜 물질전달효율을 증가시키고 반응 면적 및 시간을 증가시킴으로써 황산화물 저감 및 먼지 포집 능력을 향상시킬 수 있었다. 개선결과 황산화물 제거효율은 91.61%에서 98.43%로 향상되었고 먼지 제거성능은 77.4%에서 87.08%로 향상되었다. 배출농도는 황산화물 7.85 ppm, 먼지 4.67 mg/㎥이 배출되어 2023년의 대기오염물질 배출허용기준인 황산화물 25 ppm, 먼지 5 mg/㎥을 만족하는 수준이다. 본 연구의 성능 개선 방식은 유사한 제약조건을 갖는 다른 석탄화력발전소에도 효과적으로 적용될 수 있으리라 기대된다.

• 설비공학논문집
• /
• 제8권4호
• /
• pp.463-472
• /
• 1996

Experiments were carried out to study the operation characteristics of a regenerator with a thermo-syphon pump and a surface-flame burner for a lithium bromide (LiBr)-water absorption heat pump. A cylindrical-shape metal-fiber burner and commercial grade propane were used. The emission of carbon monoxide and nitric oxide was measured by a combustion gas analyzer. Ther regeneration rate of water vapor as a refrigerant was measured. It could be as a reference value showing the performance of the regenerator. The circulation rate of the LiBr-water solution was also measured from both the tanks for the weak-and the strong-solution. Using a refractometer, the LiBr concetration in the solution was calculated from the measured refractory index of the solution. Temperature of the solution and the condensed water was recorded at several points in the experimental apparatus with thermocouples, using a personal computer. This data collecting system for measuring temperature was calibrated with a set of standard thermometers. The generating rate of water vapor as refrigerant increased linearly with heat supplied. It was about 4.0g/s with the heat supplied at a rate of 16,500kcal/h. The circulation rate of LiBr solution also increases with the heat supplied. The difference in LiBr concentrations between the weak and the strong solution was in the range of 1 to 5% when the concentration of the strong solution was about 60%. It was dependent upon both the heat supplied and the circulation rate of the solution. The initial concentration and the level of the LiBr solution in the regenerator were measured and recorded before experiments. The effect of them on the generating rate of water vapor and the circulation rate of the solution was also studied. The generating rate of water vapor was not strongly dependent upon both the level of the LiBr solution and the initial LiBr concentration. However, the concentration difference of the solution increases with the initial level of the LiBr solution.

• 대한조선학회논문집
• /
• 제55권4호
• /
• pp.330-340
• /
• 2018

In the present works, the High-speed Cavitation Tunnel (HCT) has been designed and manufactured to have the large test section to conduct various supercavitation experiments. The large amount of air ventilated behind a cavitator produces lots of tiny bubbles, which prevent clear observation of supercavitation at the test section. To collect small bubbles effectively, a bubble collecting section of large volume is equipped upstream of the test section. HCT has the test section dimension of $0.3^H{\times}0.3^W{\times}3.0^L\;m^3$ and provides maximum flow speed of 20.4 m/s at the test section. The blockage and Froude effects on the ventilated supercavitation are investigated successfully at the test section. The basic studies such as the supercavitation evolution, drag measurements and cavity shape extraction with air flow rate are also carried out in HCT.

• 설비공학논문집
• /
• 제22권1호
• /
• pp.13-20
• /
• 2010

Airborne particulate matters have two modes of size distributions of coarse mode and fine mode. The coarse mode which is formed by break down mechanism of large particles has a peak around the $100\;{\mu}m$, and the fine mode formed by condensation and build up mechanism of evaporated vapors has a peak at several ${\mu}m$. The coarse mode particles can be removed easily by conventional collecting equipments such as a cyclone, an electrostatic precipitator, and a filter, however the fine mode particles can not be collected easily. Usually the fine mode particles are generated in the high temperature conditions especially through boilers and incinerators, so the high efficient and temperature filter is essential for the filtration. In this study, a nano ceramic filter for the removal of fine particles in the high temperature is developed and tested for several characteristics. The nano ceramic filter has double layer of micro and nano structure and the pressure drop and the filtration efficiency for $0.31\;{\mu}m$ at 3 cm/s are 15.45 mmAq, and 96.75%, respectively. The thermal conductivity is $0.038\;W/m{\cdot}K$, and the coefficient of water vapor permeability is $3.63\;g/m^2{\cdot}h{\cdot}mmHg$. It is considered that the sensible heat exchange rate is very poor because the low thermal conductivity but it has high potential to exchange latent heat.

• Journal of Preventive Medicine and Public Health
• /
• 제17권1호
• /
• pp.281-287
• /
• 1984

In search for a method of evaluating the cardiopulmonary function. 74 male and 33 female volunteers ages $18{\sim}25$ were subjected to this study The subjects walked on a treadmill at speed of 2,4,6 and 8km/hr with 0,5,10,15,20 and 25% grade of inclination, respectively, for a measurement of heart rate and oxygen-pulse. Heart rate was measured every 5 seconds at resting state and during walking by telemetric method using Heart Checker 108 System (Senoh Co., Japan). Oxygen concentration was measured by Douglas bag method collecting expired air for 5 minutes at rest, and for 2 minutes at the end of each walking exercise. Oxygen concentration in an expired air was analyzed with Orzat gas analyser and expressed in terms of STPD. Oxygen-pulse was defined as an amount of oxygen consumed at every heart at a cellular level. The followings were the results obtained from this study. 1. Mean values of oxygen-pulse at resting state was $3.1{\pm}0.11ml/beat$ in male and $2.5{\pm}0.87ml/beat$ in female, respectively. 2. Mean values of oxygen-pulse during treadmill walking were increased in proportion with the load of exercise, namely, the speed and grade of inclination, from minimum of 7.1ml/beat upto maximum of 18.2ml/beat in male and from minimum of 4.2ml/beat upto maximum of 12,7ml/beat in female. 3. Both linear and logarithmic regressional relationships between oxygen-pulse and speed of walking and grade of inclination were observed in both sexes. Predicted values of oxygen-pulse by logarithmic regressional formula on speed and on grade of inclination were better coincided with the measured values than those predicted by the linear regressional formula.

• 인터넷정보학회논문지
• /
• 제9권4호
• /
• pp.85-96
• /
• 2008

유무선 네트워크 환경에서는 사용자 I P 주소와 클라이언트 단말의 MAC 주소 정보를 등록/관리하여 인증 등을 수행하고 있다. 하지만 기존의 MAC 주소 등록/관리 방식은 공격자 자신의 MAC 주소 값을 클라이언트의 MAC 주소 값으로 변경하는 MAC Spoofing 공격에 취약하기 때문에 이에 대한 대처 방안이 제시되어야 한다. 무선 네트워크 환경에서 MAC Spoofing 공격을 탐지하기 위해 기존에 제시된 기법은 패킷의 시퀀스 번호 등에 기초하여 MAC 주소 값의 변경 등을 순차적으로 판별하는 기법이었으나 무선 공격에 대한 탐지/차단 기능을 제공하지 못하고 있다. 이에 본 연구에서는 무선 네트워크에서 AirSensor와 AP를 기반으로 무선 트래픽에 대한 정보를 수집하고 W-TMS에 구축된 MAC Address Lookup 테이블을 통해 실시간으로 MAC Spoofing 공격을 탐지하며, 다시 AP를 통해 해당 공격 트래픽을 차단할 수 있는 알고리즘을 제시하였다. 본 연구에서 제시한 탐지 및 차단 알고리즘은 성능평가 결과 MAC Spoofing 공격 시도에 대해서 고성능의 탐지/차단 기능을 수행하였으며 최소한의 무선 트래픽 전송 지연만으로도 무선 MAC Spoofing 공격에 대해 실시간으로 대응한다는 것을 확인할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.937-940
• /
• 2008

골재자원의 부족과 폐기콘크리트의 증가로 인하여 순환골재사용의 필요성이 증가되고 있다. 그러나 순환골재의 건조수축으로 인한 균열등과 같은 문제점이 지적되어 이에 대한 연구가 요구되고 있다. 따라서 본 연구에서는 순환골재에 관한 연구의 일환으로 순환잔골재를 활용한 섬유 보강 콘크리트의 소성 및 초기 건조수축균열을 판상-링형구속수축시험 및 모의부재 옥외폭로시험을 통하여 측정하였다. 그 결과 판상-링형구속수축시험의 경우 순환잔골재를 사용한 콘크리트가 천연 잔골재보다 균열발생이 크게 나타났으며 섬유혼입의 경우 무혼입보다 높은 균열 저감성능을 나타내었다. 모의부재 실험에 있어서도 판상-링형구속수축시험과 유사하게 순환잔골재를 사용한 콘크리트가 균열발생이 큰 것으로 나타났으며 섬유 혼입의 경우 높은 저감 성능을 나타내었다.

• 한국국방경영분석학회지
• /
• 제35권2호
• /
• pp.1-14
• /
• 2009

전시 공군은 각 지역에 거점부대를 선정하여 해당 지역에서 동원되는 품목별 물자를 인수하고, 물자가 부족한 지역의 거점부대에 잉여물자를 분배하여 전체 부대가 일정한 군수지원 수준을 유지할 수 있도록 계획하고 있다. 또한, 지역 거점부대는 해당지역에 주둔하고 있는 군소 운영부대들에 대한 DC(Distribution Center)의 역할도 담당하여 지역에서 동원되는 물자들과 타 지역 거점부대로부터 인수한 해당 지역 부족물자들을 군소운영부대에 분배한다. 하지만, 전시 동원물자 수송은 물자가 많이 동원되는 지역의 거점부대가 물자가 적게 동원되는 부대로의 분배 및 수송을 책임지기 때문에 동원물자들의 생산특성에 따라 지역 거점부대별 수송부담의 불균형과 다빈도 수송으로 인한 수송 자산(병력, 수송수단)의 낭비를 가져오게 된다. 또한, 공군본부나 군수사령부와 같은 상급부대는 전체적인 동원물자의 분배와 수송을 효율적인 방향으로 조정 통제하는데 대한 어려움이 있다. 본 연구에서는 이러한 어려움을 해소하기 위해 특정지역에 TC(Transfer Center)를 설치하여 물자를 분배하고 수송하는 방법론을 제시고자 한다.

• 한국실내디자인학회논문집
• /
• 제13권3호
• /
• pp.145-152
• /
• 2004

The European architects including MVRDV, Rem Koolhaas, Van Berkel, and Zaha Hadid tend to use the their own design strategy based on the objective data. This Architectural design method leads to make new paradigm of contemporary architecture. For the purpose of the understanding a part of new architecture paradigm I will analyze the case of Villa VPRO designed by MVRDV. At the result, I can draw the following conclusions. First, through collecting and analyzing data, drawing design concept and planning the space program, they decided on the design strategies of Villa VPRO. They designed the space volume having 42.4m$\times$42.4m floors and infiltrated environmental elements to solve the problems about deep space. Second, Villa VPRO was constructed by 'creative space-making system: a series of floors much like a geological formation, the continuous floors interconnected by spatial means, the precision bombardments of snake-like holes, open elevations, the stacking spaces. Third, Villa VPRO produced the spectacle space effect the various formation of continuous floors make a lot of difference space types in this building. Also they lead to move naturally and give event space. A numbers of holes and openness make it possible to provide friendly environment with combining light and air with views of the surrounding and transparency. And using the method of stacking many types of space make the differences in height.

• Journal of information and communication convergence engineering
• /
• 제14권3호
• /
• pp.200-206
• /
• 2016

Images can be obtained by collecting rays from objects. The characteristics of electromagnetic wave propagation depend on the medium. In particular, in an underwater imaging system, the interface between air and water must be considered. Further, reflection and transmission coefficients can be found by using electromagnetic theory. Because of the fact that the values of these coefficients differ according to the media, the recorded light intensities will change. A color image sensor has three different color channels. Therefore, the reflection and transmission coefficients have to be calculated individually. Thereafter, by using these coefficients, we can compensate for the color information of underwater objects. In this paper, we present a method to compensate for the color information of underwater objects by using electromagnetic wave propagation theory. To prove our method, we conducted optical experiments and evaluated the quality of the compensated image by a metric known as mean square error.