• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.3
• /
• pp.207-215
• /
• 2020

Design of a shape transition nozzle is carried out as a part of building a lab-scale supersonic combustion experimental equipment. In order to connect directly the circular shaped vitiation air heater to the square shaped scramjet combustor, area change is evaluated by using the method of characteristics. Shape transition function is introduced to control the transition rate. Boundary layer correction was made through the three-dimensional computational fluid dynamics with the assessment on the several shape transition functions. The shape transition nozzle is proved minimizing the growth of boundary layer at the center of the rectangular nozzle surfaces that caused by the pressure gradient at the corners of the rectangular nozzle and the following recirculation regions.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.5
• /
• pp.82-89
• /
• 2011

Understanding snowmelt movement to the watershed is crucial for both climate change and hydrological studies because the snowmelt is a significant component of groundwater and surface runoff in temperature area. In this work, a new energy balance budget algorithm has been developed for melting snow from a snowpack at the Central Sierra Snow Laboratory (CSSL) in California, US. Using two sets of experiments, artificial rain-on-snow experiments and observations of diel variations, carried out in the winter of 2002 and 2003, we investigate how to calculate the amount of snowmelt from the snowpack using radiation energy and air temperature. To address the effect of air temperature, we calculate the integrated daily solar radiation energy input, and the integrated discharge of snowmelt under the snowpack and the energy required to generate such an amount of meltwater. The difference between the two is the excess (or deficit) energy input and we compare this energy to the average daily temperature. The resulting empirical relationship is used to calculate the instantaneous snowmelt rate in the model used by Lee et al. (2008a; 2010), in addition to the net-short radiation. If for a given 10 minute interval, the energy obtained by the melt calculation is negative, then no melt is generated. The input energy from the sun is considered to be used to increase the temperature of the snowpack. Positive energy is used for melting snow for the 10-minute interval. Using this energy budget algorithm, we optimize the intrinsic permeability of the snowpack for the two sets of experiments using one-dimensional water percolation model, which are $52.5{\times}10^{-10}m^2$ and $75{\times}10^{-10}m^2$ for the artificial rain-on-snow experiments and observations of diel variation, respectively.

• Fire Science and Engineering
• /
• v.13 no.2
• /
• pp.26-32
• /
• 1999

We had investigated combustion pro야$\pi$ies of rice bran dusts. Decomposition of rice bran d dusts with temperature were investigated using DSC and the weight loss according to t temperature using TGA in order to find the thermal hazard of rice bran dusts, and the p properties of dust explosion in variation of their dust with the same particle size. Using H Hartman's dust explosion apparatus which estimate dust explosion by electric ignition after m making dust disperse by compressed air, dust explosion experiments have been conducted by v varying concen$\sigma$ation and size of rice br뻐 dust. According to the results for thermodynamic stability of rice bran dust, there are little change of initiation temperature of heat generation 때d heating value for used particle size. But i initiation temperature of heat generation decreased with high heating rate whereas d decomposition heat increased with particle size. Also, the explosion pressure was increased as t the ignition energy increased and average maximum explosion pressure was 13.5 kgv'cnt for 5 BJ/60 mesh and 1.5 뼈Ie미 dust concentration.

• Particle and aerosol research
• /
• v.15 no.4
• /
• pp.159-171
• /
• 2019

The cap-and-trade system against the air pollutants in the Seoul Metropolitan Area (SMA), Korea has been implemented since 2008 and will be implemented other areas in Korea on 2020. In this study, to identify the outcome and effectiveness of the cap-and-trade system in the SMA, (1) the rate of change for NOx and SOx emissions, (2) differences between the real emission and allocated amount, and (3) the status of trading are reviewed. It was found that the NOx and SOx emissions from the sources under the cap-and-trade system decreased in the SMA but the reduction was mainly due to the reduction of fuel usage not related to the system. It was found that the average percentage of annual emission in the SMA to the allocated amount between 2008 and 2018 was 66.9% for NOx and 69.3% for SOx, respectively. It suggests that there was over allocation of the emission amounts. The average trading prices in the SMA were 0.193 $/kg for NOx and 0.128 $/kg for SOx, far lower than those in RECLAIM, 131.942 $/kg and 81.677 $/kg, respectively. It was suggested that (1) the cap system for NOx and SOx emissions should be implemented only for the area with high emission ratio from large point sources, (2) the trade system is not suitable for the effective implementation of the cap system, and (3) Korean government should not allow over allocation in order to ensure sound market function without delaying the introduction of technology.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.808-817
• /
• 2016

In this study, we investigated the effects of pre-soaking in salt and sugar solution prior to air drying at $50^{\circ}C$ on the characteristics of dried apples. Pre-soaking solutions included single solutions of salt 2% and sugar 2%; and combined solutions of salt 2%+sugar 2% and salt 2%+sugar 5%, respectively. The effects of pre-soaking condition and drying were evaluated in terms of moisture content (MC), water activity, color, antioxidant activity determined by DPPH radical scavenging activity, shear force, microbial contents, and sensory evaluation of apple slices. The control sample without pre-soaking showed the most rapid drying rate; in addition, the single solutions showed higher MC and water activity after drying time of 120 min, as compared to combined solutions. In all samples, MC and water activity showed high correlation coefficients of 0.91 to 0.97; whereas, shear force was negatively correlated with MC and water activity. The single solution of salt 2% showed decrease in change of color, including L, a, and b values, and the number of aerobic bacteria during drying. In addition, highest antioxidant activity and values of sensory preferences were observed in the dried apple pre-soaked in single solution of salt 2%.

• Journal of Ginseng Research
• /
• v.16 no.2
• /
• pp.111-123
• /
• 1992

Drying characteristic data for peeled ginseng were obtained to determine dominant drying factors and fitted with five selected drying models and an empirical model. Among air temperature, relative humidity and diameter of ginseng root, drying air temperature was found to be the most influencing factor on drying rate. Drying velocity appeared faster as the drying temperature increased but its effect was less at high temperature than at low temperature. Quality change during the drying process did not occur except when relative humidity was 75fb. At high relative humidity, skin color of ginseng was turned to light brown. Approximate-Diffusion and the Empirical model for drying were in a good agreement with experimental data. The models are as follows; $.$ Approximate-Diffusion model MR = A$.$exe(-k$.$1) A = 1.72 + 0.407 In(D) - 0.0000963T3 - 0.358 In(RH) + 0.0000945 RH2 B= 1.01 + 0.0195RH - 0.O0518D2 + 0.0708 In(T) - 0.492 In(RHI-D.0000933RH2$.$Empirical model MR= Cl + Cs$.$In(t) Cl= 1.14+0.382 In(D)-0.00008477a-0.139 In(RH)+0.0000664RH2 Cs=0.440-0.0224 In(D)-0.193 In(T)+0.0000464T2-0.00000771RH2

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.2
• /
• pp.201-207
• /
• 2004

Dissolved air flotation (DAF) is a solid-liquid separation process that uses fine rising bubbles to remove particles in water. Most of particle-bubble collision occurs in the DAF contact zone. This initial contact considered by the researchers to play a important role for DAF performance. It is hard to make up conceptual model through simple mass balance for estimating collision efficiency in the contact zone because coupled behavior of the solid-liquid-gas phase in DAF system is 90 complicate. In this study, 2-phase(gas-liquid) flow equations for the conservation of mass, momentum and turbulence quantities were solved using an Eulerian-Eulerian approach based on the assumption that very small particle is applied in the DAF system. For the modeling of turbulent 2-phase flow in the reactor, the standard $k-{\varepsilon}$ mode I(liquid phase) and zero-equation(gas phase) were used in CFD code because it is widely accepted and the coefficients for the model are well established. Particle-bubble collision efficiency was calculated using predicted turbulent energy dissipation rate and gas volume fraction. As the result of this study, the authors concluded that bubble size and recycle ratio play important role for flow pattern change in the reactor. Predicted collision efficiency using CFD showed good agreement with measured removal efficiency in the contact zone. Also, simulation results indicated that collision efficiency at 15% recycle ratio is higher than that of 10% and showed increasing tendency of the collision efficiency according to the decrease of the bubble size.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.5
• /
• pp.60-66
• /
• 2012

One of commonly physical phenomena encountered in pump sump systems in which its significant influence to the hydraulic performance of pump system plays an important role in the field of fluid engineering, is the appearance of free surface and submerged vortices. In this paper, a study of the vortices behavior and their formative mechanism of asymmetry is considered in this paper by using numerical approach. The Reynolds-Averaged Navier-Stokes (RANS) equations and k-omega Shear Stress Transport turbulence model used to describe the properties of turbulent flows, in company with VOF multiphase model, are implemented by Fluent code with multi-block structured grid system. In the numerical simulation, the calculated elevation of air-water interface and vortex core contours are used to classify visually surface vortices as well as submerged vortices. It is shown that the free surface vortex is identified by the concavity of liquid region from the free surface and swirling flow at that own plane. To investigate the distinctive behavior of these vortices corresponding to each given flow rate at the same water level, some numerical testing of them are considered here in such a manner that the flow pattern of surface vortex are obtained similarly to the obtained results from experiment. Furthermore, the influence due to the change of grid refinement and the variation of depth of the concavity are also considered in this paper. From that, these influential factors will be implemented to design a good pump sump with higher performance in the future.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.1
• /
• pp.1-12
• /
• 1996

In lots of application to heat exchanger systems, closed two-phase thermosyphons are tilted from a horizontal. If the tilt angle, especially, is less than 30$^{\circ}$, the operational performances of thermosyphon are highly dependent on tilt angle. The present study was conducted to better understand such operational behaviors as mech-anni는 of phase change, and flow patterns inside a tilted thermosyphon. For experiment, an ethanol thermosyphon with a 35% of fill charge rate was designed and manufactured, using a copper tube with a diameter 19mm and a length 1500mm. Through a series of test, the tilt angle was kept constant at each of 4 different values in the range 10~25deg. and the heat supply to the evaporator was stepwisely increased up to 30㎾/$m^2$. When a steady state was established to the thermosyphon for each step of thermal loads, the wall temperature distribution and vapor temperature at the condenser were measured. The wall temperature distributions demonstrated a formation of dry patch in the top end zone of the evaporator, with a values of temperature 20~4$0^{\circ}C$ higher than the wetted surface for a moderate heat flux q≒20㎾/$m^2$. Inspite of the presence of hot dry patch, however, the mean values of boiling heat transfer coefficient at the evaporator wall were still in a good agreement with those predicted by Rohsenow's formula, which was based on nucleate boiling. For the condenser, the wall temperatures were practically uniform, and the measured values of condensation heat transfer coefficient were 1.7 times higher than the predicted values obtained from Nusselt's film condensation theory on tilted plate. Using those two expressions, a correlation was formulated as a function of heat flux and tilt angle, to determine the total thermal resistance of a tilted thermosyphon. The correlation formula showed a good agreement with the experimental data within 20%.

• Journal of Integrative Natural Science
• /
• v.2 no.2
• /
• pp.131-167
• /
• 2009

Global warming is regarded as one of the most critical issues that should be taken care of by the entire global community as it threatens the survival of mankind. South Korea, in particular, undergoes faster warming than the average rate of global warming. South Korea has revealed various warming rates and trends being surrounded by sea on three sides and having complex terrains dominated by mountains. The rates vary according to regions and their urbanization and industrialization. Differences also derive from seasons and weather elements. Changes to the highest, mean, and lowest temperature are also different according to the characteristics of regions and observatories, which is more apparent where the force of artificial weather applies. In an urban area, temperature gaps tend to decrease as the lowest temperature rises more than the highest temperature. Meanwhile, temperature gaps grow further in a coastal or country region where the force of artificial weather is small and the force of natural weather prevails. In this study, the investigator analyzed the changes to the weather elements of 11 observation spots that had gone through no changes in terms of observation environment since 1961, were consecutively observed, and had the quality of their observation data monitored on an ongoing basis. Using the results, I tried to identify natural and artificial causes affecting certain spots. Located on the east coast of the Asian Continent, South Korea sees weather changing very dynamically. Having huge influences on our weather, China has achieved very rapid industrialization for the last 30 years and produced more and more greenhouse gases and air pollution due to large-size development projects. All those phenomena affect our weather system in significant ways. Global warming continues due to various reasons with regional change differences. Thus the analysis results of the study will hopefully serve as basic data of weather statistics with which to set up countermeasures against climate changes.