• 방사성폐기물학회지
• /
• 제3권4호
• /
• pp.301-307
• /
• 2005

조사후 핵연료 가열(PIA장비)를 이용한 고연소도 UO2 사용후 핵연료의 산화 및 가열후 미세조직의 변화를 관찰하였다. 울진 2호기에서 한국원자력연구소 조사후시험시설로 이송된 국산 경수로용 고연소도 사용후 핵연료는 봉평균 연소도가 57,000 MWd/tU-rod avg.이였다. 본 시험에 사용된 시편은 국부연소도 65,000 MWd/tU UO2 소결체의 고형체 200 mg을 사용하였다. 본 시편을 사용후 핵 연료 가열(PIA) 시험장비를 이용하여 핫셀 내에서 3시간의 산화시험과 연속적으로 $1,400^{\circ}C$ 까지 가열하였다. 결정립경계까지의 산화를 위하여 $500^{\circ}C$에서 헬륨 50 ml, 표준공기 100 ml를 흔합한 산화분위기로 3시간을 유지하였다. 핵분열기체 방출거동을 알기위해 시험 전과정중에 85Kr의 방출량을 베타 측정기와 감마 측정기를 이용하여 실시간으로 측정 하였다. 가열시험이 종료된 후 전자주사현미경을 이용하여 미세구조의 변화를 관찰하였다. 시험결과 가열하는 동안 핵분열생성물은 UO2기지의 결정립경계와 표면으로 이동된 것을 관찰하였다. 이 시편은 환원과정을 통하여 재구조화 되었고, $5\~10\;{\mu}m$ 정도의 결정립크기를 가진 것으로 나타났다.

• Reproductive and Developmental Biology
• /
• 제31권3호
• /
• pp.169-174
• /
• 2007

개 난자의 체외성숙율을 높이기 위하여 다양한 방법들이 시도되고 있지만 여전히 그 효율성은 낮다. 본 연구는 개 난자의 체외성숙 시, 성선 자극 호르몬인 황체형성호르몬(LH)과 난포자극호르몬(FSH), 상피세포성장인자(Epidermal growth factor, EGF) 그리고 시스테인(cysteine)을 각각 첨가하여 72시간 동안 체외성숙시킨 후 핵성숙율(GV: germinal vesicle, GVBD: germinal vesicle break down, MI: metaphase I, MII: metaphase II, UK: unknown stage)을 확인하였다. LH와 FSH를 첨가하였을 때 첨가하지 않은 군과 GV, MI 및 MII율에는 유의적인 차이는 없었다. 하지만 GVBD율은 첨가군이 유의적으로(p<0.05) 높았다. 성선 자극 호르몬을 첨가한 배지에 10ng/ml의 EGF를 첨가하였을 때 MII율이 첨가하지 않은 군보다 유의적으로(p<0.05) 높았다(4.54% vs. 7.06%). cysteine을 첨가하였을 경우, 핵성숙율에 유의적인 차이는 보이지 않았지만 전반적으로 핵성숙율이 향상된 것을 확인할 수 있었다. 따라서 개 난자의 체외성숙 시, $10 {\mu}g/ml$의 LH와 FSH, 10ng/ml의 EGF 그리고 0.57mM의 cysteine을 첨가하는 것이 핵성숙율을 향상시키는 것으로 사료된다.

• 공업화학
• /
• 제7권6호
• /
• pp.1164-1173
• /
• 1996

현재 국내에서 가동중인 원자력발전소 공급용 핵연료 분말제조 공정에서 발생되는 폐액의 물성과 처리방법에 대한 연구가 수행되었다. 중수로형과 경수로형 발생 폐액에 함유된 우라늄을 회수/처리하기 위하여, 공히 폐액 속의 탄산이온의 제거가 필수적이다. 중수로형은 ADU 형태로 경수로형의 경우 $UO_4$ 화합물 형태로 처리하는 것이, 최종 폐액의 우라늄 농도를 최소화할 수 있었다. 처리후 폐액의 우라늄 농도는 중수로형 폐액의 경우, 폐액을 가열하여 ADU를 제조한 후 여액에 lime을 처리하는 방법으로 1ppm까지, 경수로형 폐액의 경우 $UO_4{\cdot}2NH_4F$형태로 우라늄을 침전시킬 경우 0.8ppm까지 여액중의 우라늄 농도를 낮출 수 있었다. 최적 처리조건은 중수로형 폐액의 경우 $101^{\circ}C$까지 단순 가열방법이, 경수로형 폐액의 경우 가열한 후 $60^{\circ}C$에서 암모니아로 pH를 9.5로 조절한 후 과산화수소 용액을 첨가하여 1시간 반응시키는 경우로 나타났다. 폐액으로부터 회수된 우라늄 화합물은, 중수로형 폐액인 경우 pH가 낮을수록 회수된 ADU 입자의 크기가 증가하였으며, 경수로형 폐액인 경우 회수된 uranium peroxide 화합물을 공기분위기에서 열분해시킨 결과 기존의 AUC 분말이 열분해되어 나타내는 특성과 동일한 특성을 보임에 따라 핵연료분말 제조공정으로 recycle이 가능한 것으로 판단되었다.

• 한국표면공학회지
• /
• 제12권3호
• /
• pp.207-216
• /
• 1979

Environmental pollution or contaminations caused by various kinds of pollutants have become one of most serious problems of our time. Environ mental pollution is the unfavoralble alteration of our surroundings, through direct or indirect effects of changes in energy patterns, rediation levels, chemical and physical constitution and abundances of organisms. These changes may affect humans directly or through their supplies of water and of agicultural and other biological products, their physical objects or possessions, or their opportunities for recreation and appreciation of nature. Pollutants that meet the criteria of this definition of environmental pollution are numerous: gases (such as sulfur dioxide and nitrogen oxides) and paniculate matter (such as smoke particles, lead aerosols, and asbestos) in the atmosphere; pesticides and radioactive isotopes in the atmosphee and in waterways; sewage, organic. chemicals, and phosphates in water; solid wastes on land; excessive heating (thermal pollution) of rivers and lakes; and many others. Some of these pollutants are introduced into the environment naturally, others by human actions, and most in both ways. Our major concer is with environmental pollution resulting wholly or largely as a by-product of human activities, because these can be controlled most readily. Environmental pollution cannot be solved by science and technology alone. It should be handled by an interdisciplinary approach with combined methods of science and technology as wen as social science disciplines for the better solution of this critical problem. In this respect, introducing "Environmental Science," a new scientific approach for the solution of environmental problems, which is now widely accepted by most developed countries of the world will be very helpful for systematization of theoretical basis for a new scientific approach to environmental pollution. Environmental science is "the study of all systems of air, land, water, energy, and life that surround Man. It includes all sciences directed to the system-level of understanding of the environment, drawing especially upon such disciplines as meteorology, geophysics, oceanography, and ecology, and utilizing to the fullest knowledge and techniques developed in such fields as physics, chemistry, biology, mathematics and engineering as well as many social science disciplines, such as economics, such as economics, law, political science and public administration." The components of this discipline are not new, for they are drawn from existing areas of science within biology chemistry, physics, and geoscience. What is really new about environmental science, however, is it siewpoint - its orientation to global problems, its conception of the earth as a set of interlocking, interacting systems, and its interest in Man as a part of these systems.

• 대기
• /
• 제16권1호
• /
• pp.33-48
• /
• 2006

A classification of snowfall type based on development mechanism is proposed using previous snowfall studies, operational experiences, etc. Five types are proposed: snowfall caused by 1) airmass transformation (AT type), 2) terrain effects in a situation of expanding Siberian High (TE type), 3) precipitation systems associated with extratropical cyclones (EC type), 4) indirect effects of extratropical cyclones passing over the sea to the south of the Korean peninsula (ECS type), and 5) combined effects of TE and ECS types (COM type). Snowfall events during 1981-2001 are classified according to the 5 types mentioned above. For this, 118 events, with at least one station with daily snowfall depth greater than 20 cm, are selected. For the classification, synoptic weather charts, satellite images, and precipitation data are used. For TE and COM types, local sea-level pressure chart is also used to confirm the presence of condition for TE type (this is done for events in 1990 and thereafter). The classification shows that 109 out of 118 events can be classified as one of the 5 types. In the remaining 8 events, heavy snowfall occurred only in Ullung Island. Its occurrence may be due to one or more of the following mechanism: airmass transformation, mesoscale cyclones and/or mesoscale convergence over the East Sea, etc. Each type shows different characteristics in location of snowfall and composition of precipitation (i.e., dry snow, rain, and mixed precipitation). The AT-type snowfall occurs mostly in the west coast, Jeju and Ullung Islands whereas the TE-type snowfall occurs in the East coast especially over the Young Dong area. The ECS-type snowfall occurs mostly over the southern part of the peninsula and some east cost area (sometimes, whole south Korea depending on the location of cyclones). The EC- and COM-type snowfalls occur in wider area, often whole south Korea. Precipitation composition also varies with the type. The AT-type has a snow ratio (SR) higher than the mean value. The TE- and EC-type have SR similar to the mean. The ECS- and COM-type have SR values smaller than the mean. Generally the SR values at high latitude and mountainous areas are higher than those at the other areas. The SR value informs the characteristics of the precipitation composition. An SR value larger than 10 means that all precipitation is composed of snow whereas a zero SR value means that all precipitation is composed of rain.

• 대기
• /
• 제26권2호
• /
• pp.257-275
• /
• 2016

Asian dust is a seasonal meteorological phenomenon influencing most East Asia, irregularly occurring during spring. Unusual heavy Asian dust event in winter was observed in Seoul, Korea, with up to $1,044{\mu}g\;m^{-3}$ of hourly mean $PM_{10}$, in 22~23 February 2015. Causes of such infrequent event has been studied using both ground based and spaceborne observations, as well as numerical simulations including ECMWF ERA Interim reanalysis, NOAA HYSPLIT backward trajectory analysis, and ADAM2-Haze simulation. Analysis showed that southern Mongolia and northern China, one of the areas for dust origins, had been warm and dry condition, i.e. no snow depth, soil temperature of ${\sim}0^{\circ}C$, and cumulative rainfall of 1 mm in February, along with strong surface winds higher than critical wind speed of $6{\sim}7.5m\;s^{-1}$ during 20~21 February. While Jurihe, China, ($42^{\circ}23^{\prime}56^{{\prime}{\prime}}N$, $112^{\circ}53^{\prime}58^{{\prime}{\prime}}E$) experienced $9,308{\mu}g\;m^{-3}$ of hourly mean surface $PM_{10}$ during the period, the Asian dust had affected the Korean Peninsula within 24 hours traveling through strong north-westerly wind at ~2 km altitude. KMA issued Asian dust alert from 1100 KST on 22nd to 2200 KST on 23rd since above $400{\mu}g\;m^{-3}$ of hourly mean surface $PM_{10}$. It is also important to note that, previously to arrival of the Asian dust, the Korean Peninsula was affected by anthropogenic air pollutants ($NO_3^-$, $SO_4^{2-}$, and $NH_4^+$) originated from the megacities and large industrial areas in northeast China. In addition, this study suggests using various data sets from modeling and observations as well as improving predictability of the ADAM2-Haze model itself, in order to more accurately predict the occurrence and impacts of the Asian dust over the Korean peninsula.

• 대기
• /
• 제21권1호
• /
• pp.1-16
• /
• 2011

Numerical prediction capability has been improved over the decades, but progress of prediction for high-impact weather (HIW) was unsatisfactory. One reason of low predictability for HIW is lack of observation data. The National Institute of Meteorological Research (NIMR) has been performed observation program for improvement of predictability, and reduction in social and economical cost for HIW. As part of this observation program, summer intensive observation program (ProbeX-2009) was performed at the observation-gap areas from 25 August to 6 September 2009. Sounding observations using radiosonde were conducted in the Gisang2000 research vessel (R/V) from the Korea Meteorological Administration (KMA) over the West Sea and the Eardo R/V from the Korea Ocean Research and Development Institute (KORDI) over the South Sea. Observation System Experiment (OSE) is carried out to examine the effect of ProbeX-2009 data. OSEs using Korea Local Analysis and Prediction System (KLAPS) and Weather Research and Forecasting (WRF) Model are conducted to investigate the predictability for a short time forecast. And, OSEs using WRF/3DVAR system and WRF forecast model are conducted to study the predictability for an extended time. Control experiment (K_CTL and CNTL) used only GTS observation and experiment (K_EXP and SWEXP) used ProbeX-2009 data from two system are performed. ETS for 3hr accumulated rainfall simulated by KLAPS-WRF shows that K_EXP is higher than K_CTL. Also, ETS for 12hr accumulated rainfall of SWEXP from 3DVAR-WRF is higher than CNTL. The results indicate that observation over the ocean has positive impact on HIW prediction.

• 폴리머
• /
• 제35권5호
• /
• pp.472-477
• /
• 2011

다중벽 탄소나노튜브(MWNT)의 표면이 산성기로 처리된 MWNT가 polyacrylonitrile(PAN) 섬유의 열적, 기계적 물성에 미치는 영향을 알아 보고자 질산, 황산으로 처리한 MWNT(O-MWNT)를 디아조늄염 반응을 이용하여 MWNT 표면에 이소프탈산(isophthalic acid)을 추가로 도입하였다. O-MWNT와 비교하여 볼 때 이소프탈산으로 처리된 MWNT(IPA-MWNT)가 극성용매 내에서 더 우수한 분산 안정성을 나타내었으며 이를 호모 PAN과 혼합하여 필름을 제조한 후 공기 중에서 열안정화 반응을 모사하였을 때 호모 PAN과 비교시 발열량이 감소하였다. PAN 공중합체와 IPA-MWNT를 혼합한 용액을 전도성 수조 콜렉터를 이용하여 전기방사를 한 결과 연속상의 배향된 섬유제조가 가능하였다. 1 wt%의 IPA-MWNT를 포함한 연속상의 전기방사된 PAN 섬유는 순수한 PAN 섬유와 비교하여 볼 때 인장강도가 100% 증가하였으며, 탄성률은 160% 증가되었다.

• 자연과학논문집
• /
• 제8권2호
• /
• pp.137-146
• /
• 1996

Sol-Gel법에 의해 흑연소지의 표면에 SiC막을 형성해 줌으로써 내산화성을 향상시키고자 하였다. 규소(Si) 및 탄소(C)의 근원물질로는 TEOS(Tetraethyl orthosilicate)와 phenol수지를 각각 사용하였으며, TEOS sol의 농도가 SiC막의 형성에 미치는 영향을 알아 보기 위해, $H_2O$/TEOS의 몰비를 2, 4, 6, 8 및 10으로 변화시켜 흑연소지에 SiC가 피복된 상태를 X-ray diffractometer와 SEM(scanning electron microscope)을 이용하여 분석한 결과, 약 5 ${\mu}m$, 12 ${\mu}m$, 7 ${\mu}m$, 7 ${\mu}m$ 및 2 ${\mu}m$의 SiC코팅층이 각각 형성되었음을 알 수 있다. 또, 내산화성을 알아보기 위해 $1600^{\circ}C$에서 코팅된 흑연소지를 다시 공기중에서 $1000^{\circ}C$의 온도하에서 1 시간 동안 열처리 해 준 후의 무게소실율을 조사한 결과, 각각 26.17%, 20.97%, 17.28%, 21.73% 및 28.13%로 나타났다.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.