• 설비공학논문집
• /
• 제14권5호
• /
• pp.433-440
• /
• 2002

Simulations were carried out to investigate the characteristics of $CO_2$ emissions for an electric powered air conditioning system. The $CO_2$ emissions were evaluated for various simulation parameters such as a power source distribution rate, power plant efficiency, power supply efficiency and system performance (COP). It was found that the $CO_2$ emissions were remarkably decreased by increasing the COP of the electric powered air conditioning system with storage tank. The $CO_2$emission per unit refrigeration capacity is 0.6 kg/RTh. And also, as the COP increase by 0.1, the $CO_2$ emissions decrease by 7.2%.

• 설비공학논문집
• /
• 제14권2호
• /
• pp.91-97
• /
• 2002

The present study concerns an experiment on the supply-air control in variable air volume (VAV) system with a Pl control logic. A thermal chamber with a Pl control logic is constructed to verify the previously suggested multi-zone model. The stratified thermal model is adopted in the control logic for a thermal chamber cooling test. The effects of taler- mal parameters and control parameters such as supply air temperature and Pl control factor are investigated by implementing the thermal chamber cooling test. The experimental results obtained show that the transient behavior of the air-conditioned space temperature are in good agreement with the simulation results of the stratified thermal model.

• Journal of Mechanical Science and Technology
• /
• 제14권11호
• /
• pp.1286-1295
• /
• 2000

The ventilation effectiveness is evaluated as a function of air exchange rate and supply / extract locations in a simplified model chamber using a tracer gas technique of CO$_2$ gas injected into a supply duct. Ventilation systems consist of supply and extract fans, a CO$_2$gas generator, a CO$_2$gas analyzer and a test chamber. The ventilation effectiveness is evaluated using a step-down method based on ASTM Standard E741-83. The room mean age of the model chamber is decreased with increasing air exchange rate fanged from 6to 10 air changes per hour. The ventilation effectiveness of the mechanical inlet/natural extract system is better than that of the mechanical extract system.

• 대한기계학회논문집B
• /
• 제38권10호
• /
• pp.865-871
• /
• 2014

본 연구는 벤츄리 시스템을 미세기포 생성을 위한 공기공급 장치로 개발하는데 그 목표를 두고 수행하였다. 이를 위해 상용유동해석 프로그램인 ANSYS CFX-15를 사용한 전산 유동해석을 통해 기하학적 형상변화가 벤츄리 관 내 유동특성들에 미치는 영향을 규명하였다 그리고 공급공기를 공급하는 공기 공급관의 위치, 크기, 개수 등을 변수로 2-유체 유동 해석을 수행하여 이들 설계 값들이 공기 공급 특성에 미치는 효과를 규명하였다. 최종적으로 직경 비 ${\beta}=0.75$의 벤츄리 확대관이 시작되는 위치에 공기 공급 구멍을 설치할 경우 가장 많은 공기가 벤츄리 관으로 유입되는 것을 확인할 수 있었으며, 유입공기 공급구멍 개수 및 직경과 벤츄리 관 내 공급되는 공기량 사이에는 선형적인 관계가 성립됨을 확인하였다.

• 설비공학논문집
• /
• 제19권1호
• /
• pp.51-59
• /
• 2007

The waste bunker usually consists of waste entrance zone and waste pit. In this paper, the distributions of air flow, $NH_3$ concentration and $H_2S$ concentration in a waste bunker were investigated to prevent an odor generated in a waste pit from dispersing to the waste entrance zone by numerical method. Four cases were considered such that 1) the waste incinerators is operated, 2) the waste incinerators is stopped, 3) the waste incinerator is operated and the direction of a supply diffuser is $45^{\circ}$ upward, 4) the waste incinerator is stopped and the direction of a supply diffuser is $45^{\circ}$ upward. In case of 1), the fresh air from the waste entrance zone is exhausted smoothly to the main exhaust grill of the waste pit. It means that an odor dispersion to the waste entrance zone will not occur. However in case of 2), the induction of fresh air is so small and the supply air with an odor in waste pit can flow to the waste entrance zone. Therefore, an odor will be dispersed to the waste entrance zone. This paper shows the solution that the supply diffuser with the direction of $45^{\circ}$ upward is chosen. As a result in case of 3) and 4), an odor dispersion to the waste entrance zone does not occurred and on odor is exhausted smoothly to the auxiliary exhaust grill.

• 플랜트 저널
• /
• 제15권3호
• /
• pp.35-41
• /
• 2019

본 연구는 석탄 연소에서 우드펠릿 전소 보일러로 설비를 개조하여 실제 운영 중인 125 MW급 영동화력 1호기 보일러를 대상으로 2단 연소용 공기의 공급위치와 비율을 조정하여 NOx 및 CO발생에 미치는 영향을 시험하였다. 2단 연소용 공기량이 상대적으로 증가하면, 연료입도가 작아서 낮은 과잉 공기비(1.10)로 연소할 경우 NOx는 약간 감소하고 CO는 급격히 감소하지만, 연료 입도가 커서 높은 과잉공기비(1.33)로 연소할 경우 NOx는 약간 증가하지만 CO는 거의 영향을 받지 않았다. 또한 2단 연소용 공기량이 같아도 공급위치가 주연소기 상부로 편중될수록 NOx 및 CO 발생 농도는 낮게 나타났으며 과잉 공기비가 높은 경우 2단 연소용 공기량에 무관하게 NOx 및 CO의 발생은 매우 낮은 수준을 유지한다는 것을 알 수 있었다.

• 한국화재소방학회논문지
• /
• 제31권4호
• /
• pp.26-34
• /
• 2017

본 논문은 거실제연설비의 인접구역 상호제연방식의 성능 확인 및 향상을 위한 논문으로써 국가화재안전기준(NFSC)과 NFPA 연기제어에 관한 규정을 비교 분석하였다. 분석방법은 화재 시뮬레이션(FDS)을 통해 모델링을 실시하여, 급기량 변화, 제연경계의 폭, 화재실내 가연물 변화, 유입공기의 풍속차이를 통해 이루어졌다. 그 결과 청결층 확보를 위해 급기량을 배출량 이하로 하였을때 화재실에서의 청결층 확보에 유리한 것으로 나타났으나 급기실에서는 급기량을 배출량 이상으로 하였을때 청결층 확보에 유리한 것으로 나타났으며, 제연경계의 폭이 길어질수록 성능 확보에 유리한 것으로 나타났다. 또한 가연물의 종류에 따라 급기량과 배출량을 고려해야 하며, 공기유입구 풍속은 급기량을 감소시킴과 동시에 공기유입구 풍속을 낮게 하므로써 화재실의 청결층 확보에 유리한 것으로 나타났다.

• Journal of Hydrospace Technology
• /
• 제2권2호
• /
• pp.44-56
• /
• 1996

The effects of the air on the reductions in resistance when supplied under the bottom of a semi-planing ship with a step are investigated in the present study. A 1.275m long FRP model is constructed and the pressure and viscous tangential stresses over the planing surface of the hull with and without air supply are measured through measuring holes carefully selected at the towing tank of Seoul National University. Locations of holes most suitable for air injection are surveyed in front of the planing surface of the model with careful examinations of the limiting streamlines and pressure distributions measured without air supply. At those locations, found to be just front of the step, air has been supplied into a wake region to form an air filled cavity of fixed type. Flow rates and pressure of the supplied air as well as the local pressure and shear stress distributions on the hull surface are measured to understand the physics involved as well as to determine the conditions most effective in resistance reduction at the design speed. It has been found that total resistance of the stepped semi-planing hull can be considerably reduced if an air cavity generated by an adequate air injection at the bottom of the hull near the step. After the cavity optimized at the given speed, air bubbles also have been generated right behind the point where dividing streamlines re-attach to further reduce the frictional resistance but found to be not so effective as the air cavity in resistance reductions.

• 한국화재소방학회논문지
• /
• 제15권3호
• /
• pp.1-6
• /
• 2001

옥내화재에서 높이에 따른 암흑화의 정도를, 본 연구를 목적으로 제작된 스모크박스를 이용한 실험을 통해 측정하였다. 연기로 인한 암흑화의 정도는 높이에 따라서 결정되는데, 높은 곳일수록 그 정도가 심했다. 그러나 급기구가 있는 높이에서는 암흑화가 심해지는 변이가 일어났다.

• 설비공학논문집
• /
• 제16권2호
• /
• pp.184-193
• /
• 2004

The purpose of this study is to evaluate the performance of various control strategies in commercial buildings which have been operated by the variable air volume (VAV) system. Two buildings in Seoul were chosen for the field study. The one (D building) combined by LonWorks has the constant airflow of supply fan and the proportional control of VAV units (damper type). The other (S building) combined by DDC has the PI control mode of the supply fan and the floating control of VAV units (venturi type). In estimating thermal comfort and energy performance through control modes of PI, PID, and CAV in the supply fan, we could identify several energy efficient operating control strategies for the VAV system.