• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.4
• /
• pp.2461-2476
• /
• 2013

To assess environmental contamination with carcinogens, carbonaceous compounds, water-soluble ionic species and trace gaseous species were identified and quantified every three hours for three days st three different atmospheric layer at the heart of chiang-Mai, bangkok and hat-Yai from December 2006 to February 2007. A DRI model 2001 Themal/Optical Carbon Analyzer with the IMPROVE thermal/optical reflectance (TOR) protocol was used to quantify the organic carbon(OC) and elemental carbon content in $PM_{10}$. Diurnal and vertical variability was also carefully investigated. In general, OC and EC contenttration shoeed the highest values at the monitoring period o 21.00-00.00 as consequences of human activities at night bazaar coupled with reduction of mixing layer, decreased wind speed and termination of photolysis nighttime. Morning peaks of carboaceous compounds were observed during the sampling period of 06:00 -09:00, emphasizing the main contribution of traffic emission in the three cities. The estimation of incremental lifetime partculate matter exposure (ILPE) raises concern of high risk of carbonaceous accumulation over workers and residents living close to the observatory sites. The average values of incremental lifrtime particulate matter exposure (ILPE) of total carbon at Baiyoke Suit Hotel and Baiyoke Sky Hotel are approsimately ten time shigher then those air sample collected at prince of songkla University Hat-Yai campus corpse incinerator and fish-can maufacturing factory but only slightly higher than those of rice straw burnig in Songkla province. This indicates a high risk of developing lung cancer and other respiratory diseases across workers and residents living in high buildings located in Pratunam area. Using knowledge of carbonaceous fractions in $PM_{10}$, one can estimate the gas-particle partitioning of polycyclic aromatic hydrocarbons (PAHs). Dachs-Eisenreich model highlights the crucial role of adsorption in gas-particle partitioning of low molecular weight PAHs, whereas both absorption and adsorption tend to account for gas-particle partitioning of high molecular weight PAHs in urban residential zones of Thailand. Interestingly, the absorption mode alone plays a minor role in gas-partcle partitiining of PAHs in Chiang-Mai, Bangkok and hat-Yai.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.775-783
• /
• 2013

Changes in the various quality characteristics of hamburg steak depending on the packaging methods were investigated during storage at $5{\pm}1^{\circ}C$ for up to 15 days. Three packaging treatments including vacuum packaging (VAP), air-containing packaging (AC), and oxygen scavenger packaging (OS) were applied in this experiment. The initial total aerobe bacteria counts were identical at 2.3 log CFU/g in all treatments, but the growth rate of total aerobe bacteria in the AC samples was significantly faster than the VAP and OS samples during storage. The changes in the TBA and VBN values over the storage time showed that lipid oxidation and protein spoilage developed fastest in the AC sample, followed by OS and then VAP samples. The instrumental color and texture profiles were not significantly differ between treatments during storage (p>0.05). After 12 days of storage at $5^{\circ}C$, evaluation of the samples' sensory attributes showed that the AC samples had become unmarketable with a score of less than 5.0 points for all sensory properties, whereas the VAP and OS samples were still marketable.

• Journal of the Korean Chemical Society
• /
• v.63 no.6
• /
• pp.453-458
• /
• 2019

Synthesis of ZnCo₂O₃ oxide is performed by sol-gel method via nitrate-citrate route. Powder X-ray diffraction (XRD) study shows monoclinic unit cell having lattice parameters: a = 5.721(1) Å, b = 8.073(2) Å, c = 5.670(1) Å, β = 93.221(8)°, space group P_2/m and Z = 4. Average crystallite sizes determined by Scherrer equation are the range ~14-32 nm, whereas SEM micrographs show nano-micro meter size particles formed in ZnCo₂O₃. Endothermic peak at ~798 K in the Differential scanning calorimetric (DSC) trace without weight loss could be due to structural transformation and the endothermic peak ~1143 K with weight loss is due to reversible loss of O₂ in air atmosphere. Energy Dispersive X-ray (EDX) analysis profile shows the presence of elements Zn, Co and O which indicates the purity of the sample. Magnetic measurements in the range of +12 kOe to -12 kOe at 10 K, 77 K, 120 K and at 300 K by PPMS-II Physical Property Measurement System (PPMS) shows hysteresis loops having very low values of the coercivity and retentivity which indicates the weakly ferromagnetic nature of the oxide. Observed X-band EPR isotropic lineshapes at 300 K and 77 K show positive g-shift at g_iso ~2.230 and g_iso ~2.217, respectively which is in agreement with the presence of paramagnetic site Co²⁺(3d⁷) in the oxide. DC conductivity value of 2.875 ×10^-8 S/cm indicates very weakly semiconducting nature of ZnCo₂O₃ at 300 K. DRS absorption bands ~357 nm, ~572 nm, ~619 nm and ~654 nm are due to the d-d transitions ⁴T_1g(⁴F)→²E_g(²G), ⁴T_1g(⁴F)→⁴T_1g(⁴P), ⁴T_1g(⁴F)→⁴A_2g(⁴F), ⁴T_1g(⁴F)→⁴T_2g(⁴F), respectively in octahedral ligand field around Co²⁺ ions. Direct band gap energy, E_g~ 1.5 eV in the oxide is obtained by extrapolating the linear part of the Tauc plot to the energy axis indicates fairly strong semiconducting nature of ZnCo₂O₃.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.5
• /
• pp.887-892
• /
• 2015

Jerusalem artichoke is often stored poorly after harvesting due to its delicate skin. For this reason, Jerusalem artichoke is mainly distributed in the market as a dried material. In order to improve utilization of dried Jerusalem artichoke, we made Jangachi and analyzed physiochemical characteristics with raw Jerusalem artichoke Jangachi during storage. Raw Jerusalem artichoke was sliced into 7 and 10 mm slices and dried in hot air. After aging, we analyzed rehydration capacity, pH, hardness, salinity, sugar content, and fructan content of both. Dried Jerusalem artichoke sliced into 10 mm slices took over twice as long (420 min) to be rehydrated over 90% than 7 mm sliced (200 min) Jerusalem artichoke. In the case of raw Jerusalem artichoke, hardness showed a tendency to decline. Relatively, hardness of dried Jerusalem artichoke was measured consistently. After 4 weeks, salinity and sugar content were 3.63% and $41.23^{\circ}Brix$ in raw Jerusalem artichoke Jangachi, 3.47% and $37.05^{\circ}Brix$ in 7 mm dried Jerusalem artichoke, and 3.77% and $39.15^{\circ}Brix$ in 10 mm dried sample, respectively. As a result of this study, the possibility of dried Jerusalem artichoke as a pickle was confirmed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.4
• /
• pp.183-189
• /
• 2012

Surface treatments and their effects on high temperature properties for the Hastelloy X, which is a promising candidate alloy for high temperature heat-transport system, have been evaluated. For TiAlN and $Al_2O_3$ overlay coatings, the two different PVD (physical vapor deposition) methods using an arc discharge and a sputtering, were applied, respectively. In addition, a different surface treatment method of the diffusion coating by a pack cementation of Al (aluminiding) was also adopted in this study. To achieve enhanced thermal oxidation resistance at $1000^{\circ}C$ by suppressing the inhomogeneous formation of thick $Cr_2O_3$ crust at the surface region, a study for the surface modification methods on the morphological and structural properties of Hastelloy X substrates has been conducted. The structural and compositional properties of each sample were characterized before and after heat-treatment at $1000^{\circ}C$ under air and He environment. The results showed that the Al diffusion coating showed the more enhanced high temperature properties than the overlay coatings such as the suppressed thick $Cr_2O_3$ crust formation and lower wear loss.

• Analytical Science and Technology
• /
• v.10 no.2
• /
• pp.105-113
• /
• 1997

We investigated the content of heavy metals contained in the soil at an Il-Kwang disused mine in Kyung Nam. Three sampling points were selected, each point was digged to 210 or 240cm, sampled each 30cm depth. After air drying, each sample was digested in aqua regia and then analyzed with an Inductively Coupled Plasma Atomic Emission Spectrometer. We determined the content of Zn, Pb, Cr, Cd, Cu, Mn, and Fe, maximum content of Pb, Cd, and Zn was observed to $(4.6{\pm}0.1){\times}10^3$, 9.4(${\pm}3.6$), and $(2.7{\pm}0.1){\times}10^2{\mu}g/g$ respectively. Mean pH values of soil sampled at No.1, 2, and 3 regions were 3.2, 2.6, and 2.8, respectively. These values are remarkably lower than pH of the conventional standard soil which usually shows pH level around 4.9. At each sampling point, maximum content of heavy metals was observed from 30cm to 60cm depth. The depth profiles of Zn, Cd, Pb, and Cr showed very similar tendencies to each other, but those of Fe, Cu. and Mn showed different tendencies to former ones.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.6
• /
• pp.55-61
• /
• 2015

Based on the literature study for the determination of perchlorate in soil we chose the ion chromatography as a measurement method and decided to use 70 mM KOH as an eluent to avoid the interference derived from the co-elution of pyrophosphate (P₂O₇⁴⁻), tripolyphosphate (P₃O₁₀⁵⁻). Also we proposed to use air dried soil through 0.15 mm sieve and distilled water as an extractant. Under the these basic concepts, we carried out the experiments to set up the detail procedure like solid to liquid ratio (S/L ratio), extraction time, device for extraction and indicating factors for quality control (e.g. precision, accuracy, MDL, LOQ). In case of time and device for extraction, 5 hours of mechanical shaking or 1 hour of centrifugation showed better precision and accuracy than that of sonication for 1 hour According to these results, we proposed the extraction method combining 5 hours of mechanical shaking with 1 hour of centrifugation. From the aspect of S/L ratio, the ratio of 1/2 or 1/3 showed resonable precision and accuracy. In case of the ratio of 1/2, there would be some problems in the separation process when the proportion of fine particle is high. Therefore, we proposed the extraction ratio of solid to liquid as 1/3 instead of 1/2. With the consideration of cost effectiveness and soil salinity, we proposed the use of cartridge for removing the interfering anions like chloride, sulfate and carbonate in specific sample such as saline soil.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1273-1273
• /
• 2001

The efficiency of the luminal fermentation process influences overall efficiency of luminal production, animal health and reproduction. Ruminant production systems have a significant impact on the global environment, as well. Animal wastes contribute to pollution of the environment as ammonia volatilized to the air and nitrate leached to ground water. Microbial protein synthesis in the rumen satisfies a large proportion of the protein requirements of animals. Quantifying the microbial synthesis is possible by using markers for lumen bacteria and protozoa such as nucleic acids, purine bases, some specific amino acids, or by isotopic $^{15}N,^{32}P,\;and\;^{35}S$ labelled feeds. All those methods require cannulated animals, they are time-consuming and some methods are very expensive as well. Many attempts have been made to find an alternative method for indirect measurement of microbial synthesis in intact animals. The present investigations aimed to assess possibilities of NIRS for prediction of purine nitrogen excretion and ruminal microbial nitrogen synthesis by NIR spectra of urine. Urine samples were collected from 12 growing sheep,6 of them male, and 6- female. The sheep were included in feeding experiment. The ration consisted of sorghum silage and protein supplements -70:30 on dry matter basis. The protein supplements were chosen to differ in protein degradability. The urine samples were collected daily in a vessel containing $60m{\ell}$ 10% sulphuric acid to reduce pH below 3 and diluted with tap water to 4 liters. Samples were stored in plastic bottles and frozen at $-20^{\circ}C$ until chemical and NIRS analysis. The urine samples were analyzed for purine derivates - allantoin, uric acid, xantine and hypoxantine content. Microbial nitrogen synthesis in the lumen was calculated according to Chen and Gomes, 1995. Transmittance urine spectra with sample thickness 1mm were obtained by NIR System 6500 spectrophotometer in the spectral range 1100-2500nm. The calibration was performed using ISI software and PLS regression, respectively. The following statistical results of NIRS calibration for prediction of purine derivatives and microbial protein synthesis were obtained.(Table Omitted). The result of estimation of purine nitrogen excretion and microbial protein synthesis by NIR spectra of urine showed accuracy, adequate for rapid evaluation of microbial protein synthesis for a large number of animals and different diets. The results indicate that the advantages of the NIRS technology can be extended into animal physiological studies. The fast and low cost NIRS analyses could be used with no significant loss of accuracy when microbial protein synthesis in the lumen and the microbial protein flow in the duodenum are to be assessed by NIRS.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.13 no.1
• /
• pp.15-22
• /
• 1980

It has been well known that histamine is presumably the causative material of an outbreak of allergy-like food Poisoning from eating of the meat of dark-fleshed fishes. The present paper was conducted to elucidate the changes in histamine content in the muscle of the dark-fleshed fishes, such as, common mackerel, Scomber japonicus, gizzard-shad, Konosirus punctatus and small sardine, Sardinops melanosticta, under different condition of storage and process. In general, the formation of histamine was markedly different depending upon the kind of fish and the storage temperature. The highest value of the amount of histamine was observed in common mackerel showing thirty folds of gizzard-shad, and gizzard-shad showed the lowest value. Referring to temperature, the formation of histamine at $10^{\circ}C$ was observed more rapid than that of at $25^{\circ}C$. According to the each products, the higher value observed in the sample of sun dried, and those of salted and hot-air dried were similar and boiled-dried of small sardine Was observed the lower value.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.260-260
• /
• 2013

Multiferroic materials have attracted much attention due to their fascinating fundamental physical properties and technological applications in magnetic/ferroelectric data-storage systems, quantum electromagnets, spintronics, and sensor devices. Among single-phase multiferroic materials, $BiFeO_3 $ is a typical multiferroic material with a room temperature magnetoelectric coupling in view of high magnetic-and ferroelectric-ordering temperatures (Neel temperature $T_N$~647 K and Curie temperature $T_C$~1,103 K). Rare-earth ion substitution at the Bi sties is very interesting, which induces suppressed volatility of Bi ion and improved ferroelectric properties. At the same time, Fe-site substitution with magnetic ions is also attracting, and the enhanced ferromagnetism was reported. In this study, $Bi_{1-x}Dy_xFe_{0.95}Co_{0.05}O_3$ (x=0, 0.05 and 0.1) bulk ceramic compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Dy_2O_3$, $Fe_2O_3$ and $Co_3O_4$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ or 24 h to produce $Bi_{1-x}Dy_xFe_{0.95}Co_{0.05}O_3$. The samples were immediately put into an oven, which was heated up to $800^{\circ}C$ nd sintered in air for 30 min. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The electric polarization was measured at room temperature by using a standard ferroelectric tester (RT66B, Radiant Technologies).