• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.523-531
• /
• 2012

The performance simulation of a desiccant rotor, which is a core component of a desiccant cooling system, was conducted on the basis of a theoretical solution of the heat and mass transfer process in the rotor. The simulation model was validated by comparing simulation results with experimental data; reasonable agreement was observed. The effect of the rotation speed on the performance of the desiccant rotor was investigated for various operation conditions: temperature (50 to $70^{\circ}C$), humidity ratio (0.01 to 0.02 kg/kg DA), and flow rate of regeneration air. The optimum rotation speed was determined from the maximum moisture removal capacity (MRC) of the desiccant rotor, and it was found to vary with the operation conditions. Further, the correlation for the optimum rotation speed was determined by regression analysis.

• Solar Energy
• /
• v.17 no.1
• /
• pp.47-58
• /
• 1997

The objective of this research was to investigate the enhancement of heat transfer by wire mesh in impinging air jet system at the potential core region. The first experiment was carried out without mesh between nozzle exit and flat plate and the second experiment was done with mesh between them. When mesh was installed in front of the plate, heat transfer has been Increased due to the acceleration between rectangular halls and divided small jet In case clearances are changed, heat transfer comes to maximum under the condition of C=1mm, irrespective of nozzle exit velocity and H/B. Also the average heat transfer enhancement rate of a flat plate with mesh has been increased about 44% at maximum under the condition of U=18m/s, H/B=2 and C=1mm, compared to the result of a flat plate without mesh.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.144-144
• /
• 1999

최근 국내 반도체 기술의 비약적인 발전으로 전자 기기 전반에 소형화, 고주파화, 고기능화 등이 진행되는데 반해, 반도체 소자등에 전원을 공급하거나 회로 전체를 운용하는 전기 신호를 변조.증폭시키는데 반해, 반도체 소자등에 전원을 공급하거나 회로 전체를 운용하는 전기신호를 변조.증폭시키는 인덕터, 트랜스 포머와 같은 수동 자기 소자는 아직도 3차원 벌크 형태로 사용되고 있다. 일본을 중심으로 각국에서는 자기 소자의 박막.소형화에 대한 다각도의 연구가 진행되었으나 국내서는 아직 미미한 실정이다. 따라서 고집적 전원 공급 장치나 지능 센서 등에 반도체와 자기 소자의 사용 주파수 대역과 크기가 통합된 반도체-자성체 IC(semiconductor-magnetic integrated circuit)의 필요성이 절실히 요구되고 있다. 현재 사용중인 벌크형 인덕터나, 트랜스 포머의 경우 10NHz이상의 고주파 대역에는 응용되지 못하고 있다. 이는 적용된 자성체가 페라이트(ferrite)로서 초투자율은 크지만 고주파대역에서의 공진 현상에 의해 저투자율을 나타내고, 포화 자속밀도가 낮기 때문이다. 이러한 페라이트 자성체의 대체품으로 주목받고 있는 것이 Fe, Co계 고비저항 자성마이다. 그러나 Co는 낮은 포화자속밀도를 나타내기 때문에 이러한 조건을 충족시키는 자성막으로 Fe계 미세 결정막을 사용하였다. 본 연구에서는 선택적 전기 도금법(selective electroplating method)과 LIGA like process를 이용하여 공시형 인덕터(air core inductor)의 라이브러리(library)를 구축한 뒤, 고주파 대역에서의 우수한 연자기 특성을 가지는 Ti/FeTaN막을 적용한 자기 박막 인덕터(magnetic thin film inductor)를 제작하여 비교.분석하였다. 제조된 인덕터의 특성 추정은 impedence analyzer를 이용하여 주파수에 따른 저항(resistance), 인덕턴스(inductance)를 측정, 계산한 성능지수(quality factor)로서 인덕터의 성능을 평가하였다. 제조된 박막 인덕터의 코일 형상은 5턴의 double rectangular spiral 구조였으며, 적용된 자성막의 유효 투자율9effective permeability)은 1500, 자성막, 절연막 그리고 코일의 두께는 각각 2$\mu\textrm{m}$, 1$\mu\textrm{m}$, 20$\mu\textrm{m}$이며 코일의 폭은 100$\mu\textrm{m}$, 코일간의 간격은 100$\mu\textrm{m}$였다. 제조된 박막 인덕터는 5MHz에서 1.0$\mu$H의 인덕턴스를 나타내었으며 dc current dervability는 100mA까지 유지되었다.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.196-204
• /
• 2010

Human beings are having suffered from the unexpected climate changes which are caused by global warming leaded from air pollution. More than 3 billions of people will be forced to experience insufficient water in 2015. In Korea, over 70% of precipitation has been concentrating in Summer season. Furthermore, natural disasters has been occurred constantly all over the country. The unusual flood and drought have broken out not only victims but also, property damages. By the natural condition, the effective consuming and controlling system of water is going to be the core business field and constructing dams will be encouraged and promoted for the system. To convince the objectionable against the constructing dams, a dam exhibition center stands the very important position by being responsible for the presenting positive factors and highlighting the beneficial functions. The dam exhibition center is built as complex space combined by information center regarding water resources and visitor center for the community nearby the inundated area. Combined of the different purposes, the dam exhibition center can be confused to understand the concept and contents established in the space. To enhance the visitors' understanding contents of the dam exhibition center, the spatial composition and contents are being analyzed with existing centers and define the most effective exhibition methods between the spaces and visitors. This study will be the basic quantitative analysis data for the following design works those can get the better insight how to make visitors to get information and agreement of constructing dams effectively.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.789-796
• /
• 2006

Context-aware is the core in ubiquitous environment of sensor network to support intelligent and contextual adaptation service. The new context information model is demanded to support context-aware applications. The model should not depend on a specified application and be shareable between applications in the same environment. Also, it should support various context representation and complex context-aware. In this paper, we define the context information according to context-aware process. Also we design the knowledge of domain as well as applications using ontologies and rules. The domain spatial ontology and application knowledge are represented using the spatial object model and the rules of expanded ontologies, respectively. The expression of abundant spatial ontology represents the context information about distance between objects and adjacent object as well as the location of the object. The proposed context information model which is able to exhibit various spatial context and recognizes complex spatial context through the existing GIS. This model shows that it can adapt to a large scale outdoor context-aware applications such as air pollution and prevention of disasters as well as various context-aware applications.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.293-302
• /
• 2020

Capital mobilization is a traditional business of commercial banks and is one of the core foundations for the development of a bank. Capital mobilization is the main input in the operation of a bank, and this is also the basis for generating output for credit activities as well as other banking activities. This study aims to determine the main factors that affect the decisions of individual customers to put savings deposit in Vietnamese commercial banks. Survey data collected from 403 individual customers were analyzed to provide evidence. The results from the multiple regression analysis by using SPSS software revealed that all scales in this study were reliable, and there were six components impacting the savings deposit decision of individual customers from the strongest to the weakest in the following order: the form of promotion, bank brand, service quality, interest rate policy, and employee knowledge and attitude. Besides, the finding showed customers who have high income tend to have a stronger decision on savings deposits in commercial banks. The main findings of this article provide some empirical implications for marketers in banks and serve as a suggestion to improve these factors in order to retain and attract individual customers' savings deposit decisions.

• Environmental Engineering Research
• /
• v.18 no.2
• /
• pp.85-90
• /
• 2013

This study is an attempt to quantify rainwater utilization and miscellaneous water demand in Tokyo's 23 special wards, the core of the urban area in Tokyo, Japan, in order to elucidate the potential of further rainwater utilization. The rainwater utilization for miscellaneous appropriate water demands, including toilet flushing, air conditioning, and garden irrigation, were calculated for six different types of building: residential house, office, department store, supermarket, restaurant, and accommodation. Miscellaneous water demands in these different types of building were expressed in terms of equivalent rainfall of 767, 1,133, 3,318, 1,887, 16,574, and 2,227 (mm/yr), respectively, compared with 1,528 mm of Tokyo's average annual precipitation. Building types, numbers and its height were considered in this study area using geographic information system data to quantify miscellaneous water demands and the amount of rainwater utilization in each ward. Area precipitation-demand ratio was used to measure rainwater utilization potential for miscellaneous water demands. Office and commercial areas, such as Chiyoda ward, showed rainwater utilization potentials of <0.3, which was relatively low compared to those wards where many residential houses are located. This is attributed to the relatively high miscellaneous water demand. In light of rainwater utilization based on building level, the introduction of rainwater storage mechanisms with a storage depth of 50 mm for six different types of buildings was considered, and calculated as rainfall of 573, 679, 819, 766, 930, and 787 (mm), respectively. Total rainwater utilization using such storage facilities in each building from 23 wards resulted in the retention of 102,760,000 $m^3$ of water for use in miscellaneous applications annually, and this volume corresponded to 26.3% of annual miscellaneous water demand.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.187-193
• /
• 2012

In this study, it was experimentally investigated the effect of the clearances distance between the rod and the impinging plate on characteristics of the thermal flow. For the heat transfer enhancement of wall jet region, the right triangle and the square rods were arranged in front of the impinging plate with various clearance distances. As results, the heat transfer enhancement rate of potential core region at H/B=2 was higher than that of transition region at H/B=10. In this experiment range, the maximum heat transfer enhancement rate was about 46 % higher at the square rod with H/B=2 and C=1mm compared with the flat plate. The heat transfer enhancement rate of the right triangle rod was on average about 3 to 8 % higher than that of the square rod, regardless of the clearance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.4
• /
• pp.485-493
• /
• 2009

The u-City offers diverse u-services, which are integrated with information and GIS technologies, by utilizing an integrated management platform for controlling the city efficiently, increasing convenience of city lift, and improving the quality of lives. An urban control system is a core element of the u-City to connect organically and expand all kinds of information through various u-interfaces. This study presents the implementation of a GIS service module based on the urban control system for the efficient development of u-services, which contributed to the successful execution of GIS service scenarios that include processes of unexpected events, air pollution monitoring, and emergences. The results of the study can be used as basic data for the design and operation of practical u-City services.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.11
• /
• pp.1008-1015
• /
• 2015

Thermal vacuum test should be performed prior to launch to verify satellites' functionality in extremely cold/hot temperatures and vacuum conditions. A thermal vacuum chamber used to perform the thermal vacuum tests of a satellite system and its components. A cryogenic blower is a core component of the gaseous nitrogen (GN2) closed loop thermal control system for thermal vacuum chambers. A final goal of this research is development of cryogenic blower. Design requirements of a blower are 150 CFM flow rate, 0.5 bara pressure difference, hot and cold temperatures. This paper describes the performance analysis of impeller by 1D, CFD commercial software, the design of the thermal protection interface between the driving part and the fluid part. The performance of the cryogenic blower is confirmed by test at the standard air condition and is verified by on the thermal vacuum chamber at the real operating condition.