• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.381-387
• /
• 2020

Various studies have been attempted to estimate and measure the fresh weight of crops. However, no studies have used raw images of sweet peppers to estimate fresh weight. Recently, image processing research using convolution neural network (CNN) that can use raw data is increasing. In this study, the crop fresh weight was estimated by using the images of sweet peppers as inputs of CNN. The experiment was performed in a greenhouse growing sweet pepper (Capsicum annuum L.). The fresh weight, the output of the CNN, was regressed based on the data collected through destructive investigation. The highest coefficient of determination (R²) of the trained CNN was 0.95. The estimated fresh weight showed a very similar trend to the actual measured value.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.148-155
• /
• 2011

Thermal treatment techniques are used for modifying wood and wood-based materials to improve dimensional stability and hygroscopicity. This study investigated the effects of press pressure and temperature on density, vertical density profile, thickness swelling and surface hardness of eucalyptus wood boards. The experimental wood boards were prepared from Turkish River Gum ($Eucalyptus$ $camaldulensis$ Dehn.). The surface hardness value increased with increasing press pressure in the treated groups. The application of a higher pressure at the same temperature level increased the amount of swelling of wood. It means that it is not needed for application of higher pressure to enhance the dimensional stability of wood. It is expected that it is possible to produce increased hardness, dimensional stability and durability by application of hot pressing treatment. This research showed that different press pressure and temperature values should be used to improve the performance properties of eucalyptus wood so that the end-use of the wood materials could be expanded.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.4
• /
• pp.519-532
• /
• 2019

The objectives of this study were to evaluate the effects of shelling ratio and resin content on the properties of bamboo oriented strand board (BOSB) from betung (Dendrocalamus asper) and to determine the correlation between the results of dynamic and static bending tests. Strands were steam-treated at $126^{\circ}C$ for 1 h under 0.14 MPa pressure and followed by washing with 1% NaOH solution. Three-layer BOSB with the core layer perpendicular to the surface was formed with shelling ratios (face:core ratio) of 30:70; 40:60; 50:50; 60:40 and binded with 7% and 8% of phenol formaldehyde (PF) resin with the addition of 1% of wax. The evaluation of physical and mechanical properties of BOSB was conducted in accordance with the JIS A 5908:2003 standard and the results were compared with CSA 0437.0 standard for commercial OSB (Grade O-1). Non-destructive testing was conducted using Metriguard Model 239A Stress Wave Timer which has a wave propagation time from 1 to $9,999{\mu}s$ and a resolution of $1{\mu}s$. BOSB with 8% resin content showed better physical and mechanical properties than those with 7% resin content. The increase of the face layer ratio improved the strength of BOSB in parallel direction to the grain. The results suggested that shelling ratio of 50:50 could be used as a simple way to reduce PF resin requirements from 8% to 7% and to meet the requirements of CSA 0437.0 standard. The results of non-destructive and destructive tests showed a strong correlation, suggesting that non-destructive test can be used to estimate the bending properties of BOSB.

• Journal of Agricultural Extension & Community Development
• /
• v.19 no.4
• /
• pp.1041-1066
• /
• 2012

This article aims to analyse the change factor of the industry in rural area. As the regional economy is consist of variety industry in local Revitalization of Rural Economy should consider the growth factor of industry. Analytical method is Shift-Share analysis, analysis data is used GRDP of the 5 target area. Analysis is showed that Agriculture, forestry and fishing is leading position. but Farm population decreased rapidly underway. Side work farmer and industry population is increasing rapidly. the Regional Economic growth inhibitory of 5 Gun is the weakness of the internal factor. especially Competition component is than industry-Mixed component. and the Growth of Agriculture, forestry and fishing is external factor. To improve the regional economy, 5 Gun must improve the fault. and the growth of Agriculture, forestry and fishing should promote the consumption of local products to as the local food system.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.14-20
• /
• 2001

On the bending process, metal-strap plays an important role in dispersing the stress generated in wood. Therefore, the metal-strap has more influence on the property of bentwood materials. The effect of the metal-strap thickness for bentwood was examined. The effect of metal-strap on the bending properties of Korean red pine(Pinus densiflora Sieb. et Zucc.)was investigated in this research. The metal-strap thickness is divided into 4 kinds such as 1.0, 0.8, 0.6, 0.4 mm. The specimens were selected by grain such as annual ring angles, flat grain and half-edge grain specimens. As a result of this study, the bending ability of 1.0, 0.8 mm, thickness of half-edge grain specimens was better than flat grain specimens but the result of 0.6, 0.4 mm were reversed. The bending ability of half-edge grain was better than flat grain and the grade was higher. When the processed specimens were dried, the radius of curvature(ROC) was decreased became drying-stress was not perfectly dispersed. An optimum drying-condition would deminish this phenomenon.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.324-330
• /
• 2023

This study was conducted to determine the dormancy types and optimal germination conditions of Prunus mandshurica seeds. The pericarp of P. mandshurica seeds was presumed to be the reason for their poor water absorption. After the pericarp was removed with a razor blade, germination was observed to be less than 20.0% at all temperatures except at 5℃, suggesting the presence of physiological dormancy. Germination gradually increased at 5℃ after the removal of seed coat, reaching a final germination rate of 86.7% at 14 weeks of incubation. Based on these results, P. mandshurica seeds have a physiological dormancy. When seeds with removed pericarp were subjected to cold stratification, the germination percentage (rate) in the control group was low even at 16 weeks; however, the germination percentages in the 4, 8, and 12-week cold stratification groups were notably high with 93.3, 73.3, and 100.0%, respectively. The control group in the GA3 treatment experiment with seed coats removed showed minimal germination, but at 10 weeks, the germination percentage rose to 98.3% when treated with GA3 at 100 mg/L. Thus, it is necessary to scarify or completely remove the pericarp of P. mandshurica seeds to promote germination. After pericarp removal, it is important to subject the seeds to cold stratification at 5℃ for at least 4 weeks or treat them with GA3 at 100 mg/L.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.392-404
• /
• 2019

The purpose of this study was to identify the impact of various income sources on income inequality of forestry households. Data from the Forestry Household Economy Survey from 2013-2016 were analyzed using the Gini coefficient decomposition method via income source. In particular, the income inequality analysis of forestry households was broken down into separate analyses based on group, i.e., the whole of forestry households and the five income quintile classes. The results of the analyses showed that income inequality of forestry households is primarily affected by forestry and nonforestry incomes and income quintile class. Moreover, income inequality of the highest income quintile class was largely affected by forestry income compared with other sources of income, whereas that of other income quintile classes was largely affected by nonforestry income. Therefore, in order to reduce income inequality in forestry households, it is necessary to increase the proportion of forestry income in the lower four quintile classes. Given that the income of the lowest quintile class is negative, it is necessary to devise ways to improve the proportion and quantity of forestry income. At the same time, as forestry income increases, a policy alternative is also required to improve inequality in forestry income.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1513-1513
• /
• 2001

Present Food Legislation compels dairy industry to carry out analyses in order to guarantee the food safety and quality of products. Furthermore, in many cases industry pays milk according to bacteriological or/and nutritional quality. In order to do these analyses, several expensive instruments are needed (Milkoscan, Fossomatic, Bactoscan). NIRS technology Provides a unique instrument to deal with all analytical requirements. It offers as main advantages its speed and, specially, its versatility, since not only allows determine all the parameters required in milk analysis, but also allows analyse other dairy products, like cheese or whey. The objective of this study is to develop NIRS calibration equations to predict several quality parameters in goat milk, cheese and whey. Three sets of 123 milk samples, 190 cheese samples and 109 whey samples, have been analysed in a FOSS NIR Systems 6500 I spectrophotometer equipped with a spinning module. Milk and whey were analysed by folded transmission, using circular cells with gold surface and pathlength of 0.1 m, while intact cheese was analysed by reflectance using standard circular cells. NIRS calibrations were obtained for the prediction of chemical composition in goat milk, for fat (r$^2$=0.92; SECV=0.20%), total solids (r$^2$=0.95: SECV=0.22%), protein (r$^2$=0.94; SECV=0.07%), casein (r$^2$=0.93; SECV=0.07%) and lactose (r$^2$=0.89; SECV=0.05%). Moreover, equations have been performed to determine somatic cells (r$^2$=0.81; SECV=276.89%) and total bacteria (r$^2$=0.58; SECV=499.32%) counts in goat milk. In the case of cheese, calibrations were obtained for the prediction of fat (r$^2$=0.92; SECV=0.57), total solids (r$^2$=0.80; SECV=0.92%) and protein (r$^2$=0.70; SECV=0.63%). In whey, fat (r$^2$=0.66; SECV=0.08%), total solids (r$^2$=0.67; SECV=0.19%) and protein (r$^2$=0.76; SECV=0.07%) NIRS equations were obtained. These results proved the viability of NIRS technology to predict chemical and microbiological parameters and somatic cells count in goat milk, as well as chemical composition of goat cheese and whey.

• Journal of Microbiology
• /
• v.43 no.5
• /
• pp.391-397
• /
• 2005

Escherichia coli is a common inhabitant of the intestinal tracts of animals and humans. The intestines of animals also represent an ideal environment for the selection and transfer of antimicrobial resistance genes. The aim of this study was to investigate the resistance of E. coli isolated from chicken fecal samples to fluoroquinolones and to analyze the characterization of mutations in its gyrA and parC gene related resistance. One hundred and twenty-eight E. coil isolates showed a high resistance to ciprofloxacin (CIP; $60.2\%$), enrofloxacin (ENO; $73.4\%$) and norfloxacin (NOR; $60.2\%$). Missense mutation in gyrA was only found in the amino acid codons of Ser-83 or Asp-87. A high percentage of isolates ($60.2\%$) showed mutations at both amino acid codons. Missense mutation in parC was found in the amino acid codon of Ser-80 or Glu-84, and seven isolates showed mutations at both amino acid codons. Isolates with a single mutation in gyrA showed minimal inhibitory concentrations (MIC) for CIP (${\le}0.5\;to\;0.75{\mu}g/ml$), ENO (1 to $4{\mu}g/ml$) and NOR (0.75 to $4{\mu}g/ml$). These MIC were level compared to isolates with two mutations, one in gyrA and one in parC, and three mutations, one in gyrA and two in parC (CIP, ${\le}0.5\;to\;3{\mu}g/ml;\;ENO,\;2\;to\;32<{\mu}g/ml;\;NOR,\;1.5\;to\;6\;{\mu}g/ml$). However, the isolates with two mutation in gyrA regardless of whether there was a mutation in parC showed high MIC for the three fluoroquinolones (CIP, 0.75 to $32{\le}{\mu}g/ml;\;ENO,\;3\;to\;32{\le}{\mu}g/ml;\;NOR,\;3\;to\;32{\le}{\mu}g/ml$). Interestingly, although the E. coil used in this study was isolated from normal flora of chicken, not clinical specimens, a high percentage of isolates showed resistance to fluoroquinolones and possessed mutations at gyrA and parC associated with fluoroquinolone resistance.

• Current Research on Agriculture and Life Sciences
• /
• v.23
• /
• pp.9-18
• /
• 2005

Vegetation composition and structure of forest community at Mt. Bislsan, Dalseung-Gun, Daegu in Korea, were studied using a qualitative with a quantitative approach and its vegetation types and various ecological characteristics such as the importance values, species diversity of the major component species analyzed. The forest vegetation were classified into 2 community group, 14 community, 6 group, and total of 18 vegetation units. Pinus densiflora distributed mainly from lower at the sea level, while Quercus mongolica tended to distributed upper altitude in Physiognomical vegetation. the species diversity values showed mostly 0.8 and Quercus dentata, Quercus serrato and Cornus controversa Community and so on highly showed to 1.0 and 1.1. According to the results of importance value analysis, the I.V. of pinus densiflora and Quercus mongolica highly showed in the tree and subtree layer, and Rhododendron mucronulatum and Lindera obtusiloba and so on highly showed in the shrub.