• 대한안전경영과학회지
• /
• 제5권3호
• /
• pp.11-20
• /
• 2003

An agriculture which is one of the national security industry, has recognized the importance. International country have attention to the automatization of machine for the improvement of agriculture. However, because of modernization of agriculture, the rate of accurrence about agriculture accident has increased dramatically. Especially the rate of accurence of agricultural accident is higher than the other industrial accident in the developed country. Because of these reasons, developed country has efforted to the agriculture system about safety. Australia law for the safety system of agriculture is very well and the rate of accident in the self-management agriculture is included in the statistics of industrial But The rate of accident in self-management agriculture is very higher In future we have to try new method about Agricuture Safety of Korea.

• 현장농수산연구지
• /
• 제22권2호
• /
• pp.115-122
• /
• 2020

In Korea, the agricultural machinery market has been generally on the rise, and particularly the demand for the diverse agricultural machine is increasing due to the radical changes in agriculture, such as a high supply of the advanced and automated agricultural machine and an increase in aged or female farmer population. Therefore, this study analyzes the technical trends in the precision agricultural machine domestically and globally to guide the direction of development of the ICT-based machine. The investigation of the precision agricultural machine in this study focuses on the production technology through analyzing the trends in sensor-related technology, the decision-making research, variable treatment technology, and academic publication. The result shows that information processing technology including the sensor and the decision-making requires various measurement factors and the established technologies are continually being developed.

• Journal of Biosystems Engineering
• /
• 제43권3호
• /
• pp.161-172
• /
• 2018

Purpose: During tillage operations, the selection of a working machine (tool) depends on the soil conditions as well as the type of tillage operation to be performed. The goal of this research was to ascertain the effects of varying working machine parameters of a compact disc harrow on tillage operations under various soil moisture content (SMC) conditions. Methods: The working machine parameters were the disc spacing and machine speed. The tillage parameters under investigation were the soil inversion ratio (SIR), tillage cutting depth (TCD), and soil clod breakage ratio (SCB). To determine the SIR, the areas of the white regions before and after tillage were obtained. The ratio of the difference of the areas of the white regions before and after tillage to the area of the white regions before tillage was considered as the SIR. The SCB was obtained as the ratio of the weight of soil clods after sieving with a mesh size of <0.02 m to the total weight of the soil clods before sieving. The soil TCD was measured using a tape measure at random points after the tillage operation. The resulting data were statistically analyzed in a one-way analysis of variance. Results: The highest soil inversion was achieved when the machine speed was 0.2 m/s with the disc spaced at 0.2 m in the 16.5% SMC. At a 0.4-m/s machine speed and 0.3-m disc spacing the highest soil breakage was achieved in the 26.5% SMC. The highest TCD was achieved at a 0.2-m/s machine speed and 0.2-m disc spacing in the 16.5% SMC. Conclusions: It was concluded that varying the working machine parameters, such as the disc spacing and machine speed, could significantly affect the soil inversion and soil clod breakage; however, it had no significant impact on the TCD.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 춘계학술대회
• /
• pp.149-159
• /
• 2003

In this paper, I analyzed the industrial system and agriculture system about safety between korea and australia. An agriculture which is one of the national security industry, has recognized the importance. International country have attention to the automatization of machine for the improvement of agriculture. However, because of modernization of agriculture, the rate of accurrence about agriculture accident has increased dramatically. Especially the rate of accurence of agricultural accident is higher than the other industrial accident in the developed country. Because of these reasons, developed country has efforted to the agriculture systemabout safety. Australia law for the safety system of agriculture is very well and the rate of accident in the self-management agriculture is included in the statistics of industrial but The rate of accident in self-management agriculture is very higher. Korea has many middle size factory to make new goods and factory accurre very many accident. Because Korea government research the theory and practical affairs for the industrial system about safety and health to protect industrial accident In future we have to try new method about Agriculture Safety of Korea.

• 한국농공학회논문집
• /
• 제63권6호
• /
• pp.77-88
• /
• 2021

Duck industry had a rapid growth in recent years. Nevertheless, researches to improve duck house environment are still not sufficient enough. Moisture generation of duck house litter is an important factor because it may cause severe illness and low productivity. However, the measuring process is difficult because it could be disturbed with animal excrements and other factors. Therefore, it has to be calculated according to the environmental data around the duck house litter. To cut through all these procedures, we built several machine learning regression model forecasting moisture generation of litter by measured environment data (air temperature, relative humidity, wind velocity and water contents). 5 models (Multi Linear Regression, k-Nearest Neighbors, Support Vector Regression, Random Forest and Deep Neural Network). have been selected for regression. By using R-Square, RMSE and MAE as evaluation metrics, the best accurate model was estimated according to the variables for each machine learning model. In addition, to address the small amount of data acquired through lab experiments, bootstrapping method, a technique utilized in statistics, was used. As a result, the most accurate model selected was Random Forest, with parameters of n-estimator 200 by bootstrapping the original data nine times.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.129-138
• /
• 1993

The shortage of agricultural labour due to industrial growth has greatly induced the mechanization in Korean agriculture. However small and scattered land holdings have been the main constraints in the process of mechanization. This paper describes the interrelationships of farm land structure, machinery selection and machinery operation areas. The sandy silt loam irrigated paddy land having single crop a year was selected as a target areas for this study. Machine operation cost is greatly influenced by operation period, plot geometry and operation area. On the improved geometry plots, optimal machine size increases slowly with increase in operation area. Operable area increases due to increased effective machine capacity on better geometry plot. The difference between the effects of operation period and plot geometry is that in the former case, the cost reduction is caused by delay in increase of machine size, whereas in the latter case timeliness cost is reduced by increase ffective capacity. The effect of farmland consolidation is greater on small plots than that on big plots. Increasing wage rates have induced the adoption of more labor saving machinery. Bigger labor saving machines require enlargement of operation area and larger plots through improvement in farm land structure. Machine cost on poor plot geometry increases more rapidly than that on the good plot geometry and as operation area increases machine cost reduces significantly. It is concluded that the development of agricultural mechanization ion Korea will depend on the improvement in farm land structure and enlargement of operation area.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.601-610
• /
• 1993

With the purpose of labour reduction in tea plucking operation with portable type machine, the influence of frame angles and tea leaves weight on the grasping forces of each finger were investigated. At the measurement of the grasping force of each finger except for thumb, grip strength dynamometers were attached at the grasping position of the frame instead of handle grips. A series of measurement was carried out changing frame angles of the tea plucking machine and the weight of tea leaves. With the obtained results of the experiments , the influences of the frame angles and the weight of the tea leaves on the grasping forces of each finger were analyzed. Some reasonable suggestions for the labour reduction in the tea plucking operation with portable type machine were obtained in the aspect of normalizing the balance of the grasping force on each finger and these suggestions are expected to contribute the labour reduction of the tea plucking operation.

• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.66-72
• /
• 2005

The working tactor of this study, an agriculture machine, is consisted of 4 wheel driving system with gear trains and 4-type wheel steering system. Since technological regions for 4 wheel driving system and 4-type wheel steering system are some large, we divide on two studies on 4 wheel driving system and 4-type wheel steering system This study develops transmission and axle that are very important units for strong working operation because the power of tractor is largely affected by transmission and axle. Even if the development of the power train is some common technology, it is very complicated work and needs many experience know-hows. So, for new given specifications fitted to the working tractor, a kind of new agriculture machine, this study haws out processes that are development of assembly drawing and strength analysis through classical method and CAE software for all internal parts and housing cases.

• 현장농수산연구지
• /
• 제21권2호
• /
• pp.77-86
• /
• 2019

To determine none top soil covering in rice seedling nursery method for the sparse machine transplanting, four different sowing methods were tested. Shoot and root length, fresh weight, leaf number and color using leaf color chart(LCC) and SPAD were collected as the data comparison of methods. The seedling height showed the highest growth according to the conventional (230g seed rate of pre-emerged seeds and top-soil covering) > high sowing density 1 (290g seed rate of pre-emerged seeds and top-soil covering) ≥ high sowing density 2(290g seed rate of pre-emerged seeds and none top-soil covering) > high sowing density 3(290g seed rate of iron-coated seeds and none top-soil covering). There was any statistical difference between groups in root length, leaf number, LCC, and SPAD values. Thus, a high sowing density of 290g for rice nursery seedling box was recommended to the sparse machine transplanting in rice cultivation with the none top-soil covering method, enabling convenient handling in transportation and machine transplanting work.

• 펄프종이기술
• /
• 제32권2호
• /
• pp.51-57
• /
• 2000

Cylinder machine usually gives more fiber orientation than fourdrinier and has limitation in machine speed because of fiber wash-off caused by centrifugal force when machine speed increases. This study aimed for the improvement of paper formation and productivity by setting an apron in vat inlet and by adjusting mould water head. Improvement of formation and increase of machine speed were achieved, which ultimately improve productivity. Installing an apron successfully decreased fiber wash-off. Fiber orientation and two-sideness of ash distribution became less severe. The proper adjustment of water head inside the cylinder mould proved to be an important factor not only in paper formation but also in decreasing paper two-sideness.