• Journal of Biosystems Engineering
• /
• v.35 no.5
• /
• pp.357-365
• /
• 2010

Workers in the agricultural industry have been exposed to many work-related musculoskeletal disorders. So, our objectives in this study were to measure and analyze worker's physiological bio-information to reduce musculoskeletal disorders in relation to agricultural works. We investigated worker's bio-information of physiological signals during the repeated lifting work such as body temperature, heart rate, blood pressure, physical activity, and heart rate variability. Moreover, we analyzed the workloads of lumbar spine during the repeated lifting work using the 3-axis acceleration and angular velocity sensors. The changes of body temperature was not significant, but the mean heart rate increased from 90/min to 116/min significantly during 30 min of repeated lifting work (p<0.05). The average worker's physical activity(energy consumption rate) was 206 kcal/70kg/h during the repeated lifting work. The workers' acute stress index was more than 80, which indicated a stressful work. Also, the maximum shear force on the disk (L5/S1) of a worker's lumbar spine in static state was 500N, and the maximum inertia moment was 139 $N{\cdot}m$ in dynamic state.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.4
• /
• pp.15-22
• /
• 2006

This study was conducted by the slump test and the consistency test of the cement mixed soil which is soil mixed with cement to investigate and estimate the difficulty degree of work and the proper water content. So I would like to present the fundamental data that establish the work standard of the cement mixed soil. In conclusion, in this study the slump value of the cement mixed soil increases over-all according to the increase of the water content although it has a little difference of the increase range and it is smaller than one of the soil. It is estimated that the aggregating and throwing work of the cement mixed soil which is mixed with 6% and 9% cement would be fine when it has the $25%{\sim}27%$ water content and the wall plastering work is the $30%{\sim}32%$ and the floor plastering work is the $30%{\sim}35%$ and the flowing and pouring work is the $40%{\sim}42%$ water content as well as the mold compacting work is the 20%.

• Journal of Agricultural Extension & Community Development
• /
• v.2 no.1
• /
• pp.23-39
• /
• 1995

The purpose of this study was to explore a paradigm for the development agricultural cooperative unit in Korea. To fulfill the purpose of the study, both a review of literature and case studies was used. The agricultural cooperative units selected for the survey were Doduram Swine, Songtan Cooperative Organization, Okyung Cooperative Farms, and Harim Poultry Company. To identify major factors and limitations associated with effective management of agricultural cooperative units, selected cooperative units for production, processing and marking were surveyed and analyzed. This study identified four major factors to be included in a development paradigm of effective agricultural cooperative units which were: 1) active participation of farmers, 2) techniques end attitude of participants, 3) horizontal integration of a high technology enterprise with agricultural production, and 4) increasing cooperative work on production and marking within the unit. Based on the results of the study, the following recommendations were made for further improvement and development of agricultural cooperative units : First, farmers should be encouraged and motivated to participate actively in agricultural cooperative units. Second, participants of the agricultural cooperative units should be equipped with both technical knowledge and skills on agricultural production, processing and marking. Third, a national net-work system should be established for the agricultural cooperative units throughout the country. Fourth, agricultural cooperative units should be expanded to various agricultural sectors covering wider area. Finally, agricultural cooperative units should be supported by farmers, agricultural organizations and the government for more effective management and further development.

• The Korean Journal of Community Living Science
• /
• v.26 no.4
• /
• pp.749-760
• /
• 2015

This study establishes a safe and healthy farm certification system for Korean farmers and presents the certification system and assessment items. Existing certification systems for safety and health were compared through a review of local and international studies as well as an examination of advanced examples. Then the certification system and assessment items were objectively verified through an expert evaluation process. As a result, four domains of certification participation, implementation, certification evaluation, and post management were identified as components of the certification system. For assessment measures, 6 categories, 21 factors, and 96 items were derived. The results are expected to be used as basic data in establishing a foundation for the implementation and operation of a certification system appropriate for distinct characteristics of the Korean agricultural sector.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.107-114
• /
• 2023

Garlic is one of the major seasoned vegetables in Korea along with peppers and onions. Although it is a major cash crop, the aging population of farmers and rising labor and production costs are cited as the reasons for the decreasing production. Accordingly, it is necessary to introduce and spread garlic cultivation mechanization technology to reduce the input labor demand. In this study, conducted a field demonstration in Jeollanam-do using garlic harvesting machinery. In addition, it was intended to improve the mechanization rate of garlic harvesting by deriving factors that can apply to garlic harvesting machines in Jeollanam-do and investigating regional adaptability. As a result of the analysis, it was found that the harvesting performance of the garlic harvester and garlic collector in Jeollanam-do met the agricultural machine test standards. In addition, as a result of calculating the input effect of the mechanized work system compared to the conventional garlic harvesting work system, it was found that there was a labor-saving effect of 96.02%.

• International journal of advanced smart convergence
• /
• v.12 no.2
• /
• pp.76-83
• /
• 2023

Squatting of agricultural work can cause musculoskeletal disorders due to excessive pressure and rotational force on the knee joint In order to improve the assistive chair used in squatting agricultural work so that it can be used in a narrow groove, it is intended to improve the musculoskeletal harm of squatting work by attaching a spring on the assistive chair. Therefore, in the presenty study, 3D drawing was done using ProEngineer (3D), and a mock-up was produced and tested. Using pro-Engineer, it was judged that it was rare for plastic to be broken by a spring, so the analysis was conducted with a focus on springs. It was found that the structure that can absorb the shock according to the rigidity of the tape spring and balance the body is that the power to withstand the load of the weight is distributed as a whole when five springs are used. Electromyography was measured using ME600 (Mega Electronics, Finland) Measuring equipment attached to the waist, thighs, calves, and shins. EMG values were measured and compared with the prototype in two ways, when the worker did not wear the product and when he wore an existing product on the market. As a result of the experiment when using the prototype, the maximum EMG value for each part is considered to be helpful in preventing musculoskeletal diseases as the amount of muscle used is reduced in the waist, thighs, calves, and shins.

• Safety and Health at Work
• /
• v.13 no.4
• /
• pp.440-447
• /
• 2022

Background: Agricultural handle equipment is present on all production areas' farms. They are handy and portable; however, excessive use can lead to acute traumas or accidental injuries. Repetitive movements, awkward postures, and hand-arm vibrations predispose them to pain and work-related musculoskeletal disorders. The purpose of this study was to observe the interaction of handle equipment in terms of electromyographic activity and analyze the postural work-related alterations. Materials and methods: Twenty male agricultural operators, mean age 24±1.54 years, underwent the electromyographic analysis testing their muscular activities with a brushcutter, electric saw, and hedge trimmer in four different test conditions. Results: The brushcutter proved to be the agricultural handle equipment with the higher mean frequency (3.37±0.38 Hz) and root mean square (5.25±1.24 ms^-2). Furthermore, the digital postural analysis showed a general asymmetry of the main arm and the respective side of the trunk. The head resulted right inclined in the anterior frontal plane by 5.7°±1.2°; the right scapula lower than the left in the posterior frontal plane (8.5°±1.8°), and a working trunk inclination of 34.15°±5.7°. Conclusions: Vibrations of handle equipment and awkward working postures represent a risk for agricultural operators. Preventive measures are required to avoid young operators from experiencing musculoskeletal disorders all lifelong.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.2
• /
• pp.99-107
• /
• 2023

Recently, the abnormal weather events and crop damages occurred frequently likely due to climate change. The importance of meteorological data in agricultural research is increasing. Researchers can download weather observation data by accessing the websites provided by the KMA (Korea Meteorological Administration) and the RDA (Rural Development Administration). However, there is a disadvantage that multiple inquiry work is required when a large amount of meteorological data needs to be received. It is inefficient for each researcher to store and manage the data needed for research on an independent local computer in order to avoid this work. In addition, even if all the data were downloaded, additional work is required to find and open several files for research. In this study, data collected by the KMA and RDA were uploaded to GitHub, a remote storage service, and a package was created that allows easy access to weather data using Python. Through this, we propose a method to increase the accessibility and usability of meteorological data for agricultural personnel by adopting a method that allows anyone to take data without an additional authentication process.

• The Korean Journal of Community Living Science
• /
• v.20 no.4
• /
• pp.515-522
• /
• 2009

This study was to develope the functional work clothing for livestock farmers. Major demanding performances for livestock work clothing are anti-soil and anti-bacterial properties. On surveys, functional fabrics that have anti-soil, anti-bacterial and waterrepellent performances were developed and the work clothing that have adaptability to body movements were manufactured. The designs of livestock working clothes were two piece and one piece with rubber bade in waist. The thermal responses of subjects wearing the winter working clothes for stock farming worker were measured in the climate chamber($17^{\circ}C$, 40% R.H.). The main results were summarized as follows: Total body weight loss was smaller and the mean skin temperature was higher in developed clothes than the market product. Clothing micro-climate of developed clothes was lower than the market clothes. Subjective sensation did not have significant differences. From the results of various evaluation, developed garments for livestock workers showed better efficiency than the market product.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.4
• /
• pp.213-226
• /
• 2013

Agricultural tourism is a new kind of industry, which combined agriculture with tourism. It not only has the productive function, but also has the function of improving the quality of ecological environment and supplying people with sightseeing, leisure, vacation. Agricultural tourism is a new kind of industry from the amalgamation of agriculture and tourism: it is based on farm work, characterized by agricultural management, combines agriculture and tourism, and includes the city as a market-place. It satisfies tourist demand with food, lodging, excursions, shopping and entertainment provided by agricultural places and agricultural products. After combining the substance of this study with the primary sources regarding the development of agricultural tourism, I suggest plans for the development of local agricultural tourism on the basis of sustainable tourism theory in case of the Inner Mongolia region. To conduct research, various data such as literature research and surveys are collected and analyzed. According to the result of the research, the Inner Mongolia region has great-wealthy resources for agricultural tourism. However, they have problems as well such as lack of funds, low infrastructure, low business-mind level, low management-mind, the scarcity of mid-supporting organizations for research and education, low awareness, and low service level of the agricultural tourism. In order to solve these problems, have to strengthen publicity, strengthen the county and city communication, educates continuously profession talented person, establish related laws and regulations, increase the integrity of infrastructure. As a developing industry, agricultural tourism is a new field of study which needs more encouraging research. The agricultural tourism of Inner Mongolia Autonomous Region has only just started development resulting in a limited amount of information available for this study. Future planned work entails a continuous in-depth study of Chinese agricultural tourism, considering Inner Mongolia Autonomous Region in particular.