• Journal of Biosystems Engineering
• /
• v.32 no.5
• /
• pp.301-308
• /
• 2007

Sesame has usually been harvested manually in korea. The conventional sesame harvest procedures consists of cutting, binding, drying and pod shattering. The procedures of drying and shattering are repeated $2{\sim}3$ times. By manual works of this conventional shattering, it was found that some extent of pods were has always remained unopened. Therefore, this study was conducted to find a way to save the labor of sesame shattering by use of a drying device; a prototype of shattering machine was developed and tested the performance. The developed prototype consists of several parts: a continuous horizontal inlet using a chain conveyer, a shattering by a shocking agitator, a rotating cone for shattering of remaining closed pods, and a winnow. The shattering ratio measured by this prototype was 90.3%, 6.4% and 3.3% at the first, second and third shattering step, respectively. We found that in contrast to the conventional method which required at least 3 times operations for complete shattering, this shattering prototype with the condition of sufficient dried sesame pod offered more than 90% of shattering ratio in the first operation.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.425-433
• /
• 2009

The developed final shattering machine for labor-saving mechanization of shattering of sesame consisted of input part, shattering part, re-shattering part for unshattered pod and pneumatic sorter. The bundle of sesame was held as upside down and fed into the machine continuously. Then, the fed bundle of sesame was shattered by side shock and agitation. The performance of shattering for the sun dried bundle of sesame of conventional manual work and final shattering machine was compared. Since the shattering ratio measured by the final machine was 97.2% at the first operation, in case of fully dried sesame by drying stand, the harvest of sesame can be completed by only one time shattering operation. The work hour per area of 10 a for the mechanical work and the manual work were 0.3 hour and 13.9 hour, respectively. The total shattering ratio of the final machine with vertical feedings of bundle of sesames was 97.2%.

• Journal of Labour Economics
• /
• v.33 no.2
• /
• pp.135-164
• /
• 2010

This paper compares the earnings effect of inter-industry technology differences between the self-employed and wage earners. It is assumed that primary skills utilized by the self-employed and paid workers differ in nature, and thus the earnings effect of technology differences and its skill-biasness also differ for each type of workers. For the empirical analysis. Heckman's two-stage method and quantile regressions are fitted to Korean panel data. The earnings effect of technology differences turns skill- biased for wage earners (job-specific skills), but prevails for all self-employed workers (entrepreneurial skills) regardless of their schooling level. This sectoral difference holds for each different quantile of earnings distribution.

• Korean Journal of Plant Resources
• /
• v.16 no.2
• /
• pp.134-140
• /
• 2003

To increase self-sufficiency ratio and agricultural income, six cropping systems by introducing several crops in perilla were tested from 2001 and 2002. Weed occurrence was high in barley+perilla and safflower+perilla cropping system. Pre-and post-crops in barley+perilla and safflower+perilla showed good growth. Safflower+perilla cropping system was labor-saying and cost down because polyethylene film of pre-crop was reused in post-crop. But when perilla was introduced as post-crop of sesame, delayed seed date resulted in decreased growth and grain yield. The income in barley+perilla and safflower+perilla was greater 4.1fold and 5.2fold, respectively than in perilla mono-crop system. Soil physical properties were improved in order of safflower+perilla, barley+perilla cropping system.

• Journal of Labour Economics
• /
• v.24 no.1
• /
• pp.149-176
• /
• 2001

This paper analyzes job sequences of men and women using optimal matching in order to find patterns of intra-generational mobility in Korean society. Men and women differ in their job careers: men show long-lasting job sequences with few gaps, while women either have short careers or have interrupted careers with long gaps. Long gaps in men's career are limited to those cases in which men move from agricultural to other job. The results from a combination of optimal matching and cluster analysis show that men's job sequences cluster around major occupations while women's cluster in terms of sequence length. The interrupted careers characteristic of women are considered to be consequent on the burdens of house keeping and child raising together with the discrimination against women pursuing careers.

• Journal of Biosystems Engineering
• /
• v.34 no.4
• /
• pp.211-219
• /
• 2009

In the process of oyster mushroom production, loading work of culture medium needs the most intensive labor power and cost. Therefore, the development of culture medium loading machine causes to reduce the manpower and cost. The main objectives of this study are identify cultivating environment, physical properties of culture medium and to make an element design of culture medium loading machine. The results are summarized as follows: 1. The moisture content and density of popularly used culture medium were 70%(w.b), $26\;kg/m^3$, respectively. 2. Pressure of the blower increased as the impeller speed increased, and the opening ratio of pressure controller decreased. 3. Recommendable c1earance(${\delta}$) between an impeller plate and a blower case was 25 mm at an impeller speed of 3183 rpm 4. Discharge device of type B with a hopper and suit was better than type A with a hopper.

• Journal of Biosystems Engineering
• /
• v.34 no.4
• /
• pp.220-227
• /
• 2009

In the process of oyster mushroom production, loading work of culture medium needs the most intensive labor power. Therefore, development of culture medium machine causes to reduce the manpower and cost. The main objective of this study is to develop the culture medium loading machine and investigate the optimal operation conditions and to evaluate the economic value of the machine. The results are summarized as follows: 1. Optimum transporting velocity of the conveyor was 0.61 m/s 2. Optimum speed of blower was 3183 rpm at the transporting velocity of 0.61 m/s with the loading quantity of 3.41 t/hr 3. Recommendable opening area ratio of pressure controller was 1/2 at the blower speed of 3183 rpm and the transporting velocity of 0.61 m/s 4. The break even point resulted in $240\;m^2$ of cultivating area compared to the method of with portable workbench, and $350\;m^2$ of cultivating area compared to the method of with a tractor and a truck.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.1
• /
• pp.47-60
• /
• 2018

계획적이고 안정적인 영농을 위해 영농작업 인력을 확보하는 것은 매우 중요하다. 하지만 농가인구의 감소로 인한 농업인력 확보의 어려움과 농업노동 임금의 지속적인 증가는 경영주에게 이중의 고통이 되고 있다. 따라서 본 연구에서는 농가처분가능소득이 전국에서 가장 높은 강원도를 지역 표집으로 선정하여 Bivariate Probit 모형을 이용해 내국인과 외국인 고용의 상호 관계를 고려한 고용인력 수요 결정요인을 살펴보았다. 분석결과, 첫째, 3개월 이상 노동력을 고용하는 농가들의 경우 내국인 고용수요와 외국인 고용수요 간에는 양(+)의 상관관계가 있는 것으로 나타났다. 둘째, 전형적인 도시근교 농업의 특징을 나타내는 춘천시에 비해 강원도내 타 지역 농가들은 다른 변수들이 일정할 경우 내국인과 외국인의 고용수요가 증가하는 것으로 나타났다. 셋째, 젊은 경영주일수록 내국인 상시 고용에 대한 수요가 높고, 농가조직에 참여하고 있는 농가일수록 자가노동 확률은 0.13% 감소하고, 상시 농업 노동력에 대한 수요가 증가하는 것으로 나타났다. 이러한 분석결과를 종합한 농업 노동력 확보를 위한 정책적 시사점으로는 첫째, 상시고용된 농업인력들을 대상으로 국내외 문화 차이를 인지하고, 내국인 노동자와 외국인 노동자간의 협력 네트워크 구축을 위한 영농교육 확대가 필요하다. 둘째, 각 지역별로 내국인 또는 외국인 노동자의 상시고용 수요가 상이한 것으로 나타나 강원도내 지역별 농산업 현황을 기반으로 "(가칭)강원도 농업 인력 수급 플랫폼" 구축이 필요하다. 셋째, 청년창업농과 농가조직 참여 농가들을 대상으로 농작업 상시고용 인력을 우선적으로 매칭해 주는 것이 필요하다.

• Health Policy and Management
• /
• v.28 no.3
• /
• pp.233-239
• /
• 2018

A rapid decrease of total fertility rate to 1.08 in 2005 prompted the Korean government to plan and implement a '5-year plan for ageing society and population policy' starting from 2006. The 1st and 2nd 5-year plans had not shown any discernible impact on the fertility and the 3rd 5-year plan was launched in 2016. However, the fertility rate is going down further. The author reviewed the contents and assessment reports of the fertility promotion plan to suggest ideas for complementing the shortcomings of it. Author defined the major determinants of marriage and child birth as philosophy, politics, sense of value, social norm, culture, healthcare, and education. The plan was examined in view of these determinants. Transformation of Korea from an agricultural society to an industrialized society in a short period of time had brought about changes in most of the determinants of marriage and child birth; in particular philosophy and sense of value. These aspects were not put into consideration in the plan. Author suggested to launch a social education program for the general public to establish a sound philosophy of life, reform the sense of value on family, child birth and education, and cultivate the skill to draw a consensus through discussions on the social issues. A special program to promote marriage of women at the optimum age for child birth was proposed. The government should implement well balanced policy for economic development and labor. Multidisciplinary approach was recommended for these tasks.

• Journal of Biosystems Engineering
• /
• v.36 no.3
• /
• pp.171-179
• /
• 2011

Facing the current hikes of labor wage and high oil price, it is needed to have energy-saving machinery which also enables us precise farm operations. Thus, it was necessary to develop a safe machine which allows secure and pleasant works along orchard slopes. In this study, a lifting utility with balance-controlled platform was developed. The platform utility could maintain to level the workbench while driving along slopes. Even the machine body was driven at the tilt angle ranges of ${\pm}20^{\circ}$, the platform bench could be maintained within ${\pm}0.5^{\circ}$ of a gimbal angle. In addition, the machine lifted up to 2.0 m using an electric-hybrid driving mechanism with a low noise. A tandem hybrid power source was developed with a DC 72 V, 100 AH for the Deep-Cycle batteries, charged with 3.5 kW gasoline generator as an auxiliary power source. HST, which is one of the CVT's, was adopted as a transmission device, and a crawer track was used for the safety of the vehicle against tip-over. The maximum lifting height of platform was is 2,500 mm, and the maximum extendable width was 2,900 mm.