Journal of Biosystems Engineering

Korean Society for Agricultural Machinery (한국농업기계학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Shattering Machine for Sesame (III) - Fabrication and Evaluation of the Final Machine -

참깨 탈립 작업기계 개발에 관한 연구(III) - 최종기 제작 및 평가 -

  • Lee, Jong-Su (Dept. of Gas Safety Engineering, Kundong University) ;
  • Kim, Ki-Bok (Korea Research Institute of Standards and Science)
  • Published : 2009.12.25
Download PDF
⟨ Previous Next ⟩

Abstract

The developed final shattering machine for labor-saving mechanization of shattering of sesame consisted of input part, shattering part, re-shattering part for unshattered pod and pneumatic sorter. The bundle of sesame was held as upside down and fed into the machine continuously. Then, the fed bundle of sesame was shattered by side shock and agitation. The performance of shattering for the sun dried bundle of sesame of conventional manual work and final shattering machine was compared. Since the shattering ratio measured by the final machine was 97.2% at the first operation, in case of fully dried sesame by drying stand, the harvest of sesame can be completed by only one time shattering operation. The work hour per area of 10 a for the mechanical work and the manual work were 0.3 hour and 13.9 hour, respectively. The total shattering ratio of the final machine with vertical feedings of bundle of sesames was 97.2%.

Keywords

References

  1. Ahn, B. E. 2000. The Science of Sesame. pp. 3-18. Hanlim Publisher, Seoul, Korea
  2. Cho, E. G. 2008. The Research of Korean Traditional Food. pp. 301-304. Sungshin Women's University, Seoul, Korea
  3. Hwang, J. D. 2008. Studies on the mechanized transplanting and harvest techniques of sesame. Report of National Institute of Crop Science. pp. 576-580. (In Korean)
  4. Kang, C. W. 1997. Integrated mechanization system on polyethylene film mulching culture in sesame. Journal of Crop Science 42(5):489-496. (In Korean)
  5. Lee, J. S. 2003. Drying Stand for Sesame. Patent No.0334064. Korean Intellectual Property Office
  6. Lee, J. S. and K. K. Kim 2007. Development of shattering machine for sesame(I) - Design and fabrication of prototype machine -. Journal of Biosystems Engineering 32(5):301-308. (In Korean) https://doi.org/10.5307/JBE.2007.32.5.301
  7. Lee, S. H. 1990. Sesame Thresher. Patent No.0169293. Korean Intellectual Property Office

Cited by

  1. Separation Characteristic of Shatter Resistant Sesame After Threshing vol.39, pp.4, 2014, https://doi.org/10.5307/JBE.2014.39.4.299
  2. Development of Threshing Machine for Shatter-Resistant Sesame vol.40, pp.2, 2015, https://doi.org/10.5307/JBE.2015.40.2.110