• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1386-1392
• /
• 2017

With the active usage of digital media, the importance of and the interest in User Interface (UI)/User Experience (UX) have been increasing. This study proposes the development of design evaluation model to utilize the quality analysis model as a basis if there were to be a development of mobile education application. Main factors of the design evaluation model, which is based on User Value analysis, influence users' attitudes and intentions in continuing their uses of a mobile education application. The employment of the design evaluation factors onto the existing agile method's development stage, therefore, would provide an optimal UX environment for the application. This application not only will increase the satisfactions of consumers, but also will have positive impacts on their intentions in continuing their uses of a mobile education application.

• The Korean Journal of Health Service Management
• /
• v.7 no.3
• /
• pp.203-212
• /
• 2013

Medical devices separated by a committee of the International Electrotechnical Commission IEC TC (Technical Committee) 62 medical electrical equipment being promoted by the International standards. Actually, a lot of standards were existed, but many national and international standards for medical devices were lacking in practical standards that can be applied to their development. Most international standards were focused in electrical and mechanical safety of medical devices. Therefore, there were few practical standards which contain essential performance evaluation. Although medical device regulations do not enforce a fixed lifecycle model, activities are presented in a sequential manner, thus hinting at a waterfall process. Meanwhile, for a decade or more, software teams have benefitted from agile development methods. Several medical device manufacturers have adopted agile practices while keeping development in compliance with regulations, but conflicts arise and decisions have to be taken in favor of agility or formality. However, if there are new practical standards of medical devices, it must be possible to promote the medical devices industry in their nation. To do this, there is a need to develop a new standard could apply to the international market through the analysis of the medical device related technology. Consequently, new standards such as NP (New proposal) or NWIP (New Work Item Proposal) should be developed through international standardization of medical device technology.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.607-608
• /
• 2006

This article deals the development of Agile and Intelligent Manufacturing System(AIM) for the assembly automation of a tiny ultrasonic actuator used in camera phones and PDAs. The system consists of multi-vision modules, end-effectors, a standard base frame, dispensers, jigs and modular manipulators. Subsystems are a vision system, a force control system and a virtual reality system. Experimental results show that the assembly process for the small components in the various IT applications can be realized by the AIM system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.322-324
• /
• 2007

형상 관리는 형상 관리의 대상이 되는 형상 항목을 선정하여 프로젝트 생명 주기 동안 선택된 산출물의 무결성을 확보하는 활동이다. 반면 짧은 생명주기를 반복하여 고객에게 배포하는 애자일 개발 방법에서는 문서 산출물보다는 구성원의 지식에 기반한 개발을 요구한다. 그러나 애자일 개발에서도 필요한 산출물은 반드시 작성하라고 하며, 그러한 산출물은 형상 관리의 적절한 관리를 통해 무결성을 유지할 수 있는 프로세스가 필요하다. 본 논문에서는 애자일 개발의 기민함을 유지하면서 산출물에 대한 무결성을 확보할 수 있도록 애자일 개발의 대표적인 방법론인 XP에 형상 관리 프로세스를 연구 및 개발하여 그 적용을 제안한다.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.161-166
• /
• 2019

Viewed in the rate of change in the web environment, it is very difficult to remain the initial planning at the time until the time of launch, and there is a need for a method to accommodate changes and satisfy market demands during the development process. Unlike the traditional waterfall approach of maintaining initial planning, scrum is one of the agile methodologies that enables flexibility to respond to changes in the market and customers' needs and drive customer satisfaction and business success. However, to apply the scrum to a project in actual, the practice method itself is relatively simple but not easy to apply. The reason is that the members of the organization need to understand and participate in scrum's philosophy and principles and the continuous observation and change management should be carried out. Therefore, in this paper, we presented the feature dashboard and customized scrum methodology to enable continuous observation and change management using visibility, and we shared the case that periodically reflected inspection and adaptation with the explanation of the main points. Also, based on the experience with participants, the strengths and weakness of the feature dashboard and the customized scrum methodology are summarized.

• Journal of Space Technology and Applications
• /
• v.3 no.4
• /
• pp.322-332
• /
• 2023

Satellite attitude-control actuators are equipped with a reaction wheel for three-axis attitude control. The reaction wheel rotates a motor inside the actuator to generate torque in the vector direction. When using the reaction wheel, there are restrictions on the torque values generated as the motor rotates. The torque value of the reaction wheels mounted on small satellites is approximately 10 mNm, and high values are not used. Therefore, three-axis attitude control of a small satellite is possible using a reaction wheel, but this method is not suitable for missions that require rapid attitude control at a specific time. As a technology to overcome the small torque value of the reaction wheel, the control moment gyro (CMG) is currently in wide use as a rapid attitude-control actuator in space satellites. The CMG has an internal gimbal mounted at a right angle to the rotation motor and generates a large torque value. In general, when the gimbal operates, a torque value approximately 100 times greater is generated, making it suitable for rapid posture maneuvering. Currently, we are developing a technology for mounting a controlled moment gyro on a small satellite, and here we share the development status of an 800 mNm CMG.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.2
• /
• pp.311-324
• /
• 2004

Software development undergoes a number of iterations and each iteration forms its own cycle going through requirement analysis, scheme and design, implementation and finally test and evaluation. In this iterated development process, executable releases are produced, improved and eventually developed to a complete system, going through this particular development cycle. Compared to the conventional process, the advantage of rapid iterative development process lies in reducing risk factors in early stage and responding to changes very flexibly. In addition, highly reusable, the process can improve capabilities of the development team while the project is being carried out. As a result, overall balance in quality is secured. The objective of this paper is the research of rapid development process and its case studies showing how to adapt the rapidly changing customer requirements and to transform those requirements into the project timely and adequately. The proposed process is focused on the common and core activities of NET-based MarMIIII, MSF/CD, XP, Agile, PSP and TSP

• Information Systems Review
• /
• v.13 no.1
• /
• pp.61-74
• /
• 2011

Software industry still has many deep-seated problems. As a natural consequence, it may have to learn from best practices in more mature industry like manufacturing. An example is 'lean' software development which is defined as translation of 'lean manufacturing' principles to the software development domain. The principles include 'eliminate waste' and 'amplify learning.' It was much asserted that these principles are worth applying. Not much study, however, was done on how to practically implement these principles into software development practice. In this study we attempt to present a method in which project lead time and software defects are regarded as major targets of management and are visualized using Cumulative Flow Diagram. We further applied this method on actual projects. The result confirms that agile is positively effective on reducing wastes.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.1
• /
• pp.103-112
• /
• 2015

Because of increased global competition, rapid technology development, and shorten product life cycle, manufacturing firms needed to quickly adapt to the changes of customer and competitive environment. During last 20 years, lean production and agile manufacturing have been used to enhance the efficiency and effectiveness of manufacturing firms. This study is purposed to examine the antecedents of agility and to statistically analyze not only the effect of antecedents on agility but also the effect of agility on business performance. This study used the structural equation model and found that intra-organizational cooperation, inter-organizational cooperation, and mutual trust had the significant effects on agility. And it was found that agility had a significant effect on operation performance and strategic performance. Agility has been one of important competitive advantages enhancing the supply chain process and firm's competitiveness. This study contributes to widen the practices of agility capability.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.215-220
• /
• 2018

This paper limited the participation of large corporations in the mass information market by revising the Software Industry Promotion Act in order to increase business opportunity, equality of opportunity, and capacity building for small and medium sized IT companies. However, it is a fact that the medium and small SW companies have insufficient business capacity and expose various problems such as quality degradation of public information business, inadequate risk management, and deterioration of schedule management. In order to solve this problem, this paper derived the factors of quality deterioration in the system integration project and proposed to carry out the project by using some activities of VISUALIZATION, rigorous test management and Agile Methodology as a solution. Applying these measures to healthcare IT projects developed by midsize / small-sized IT companies has improved communications, improved quantitative progress management and improved project visibility. In addition, it contributed to minimizing defect resolution time, improving the requirement coverage ratio, and shortening unnecessary meeting time.