• Journal of the Korean GEO-environmental Society
• /
• v.17 no.3
• /
• pp.13-19
• /
• 2016

The ultrasonic waves for monitoring concrete materials have been used to investigate the setting and hardening process of concrete. This paper presents the application of bender elements for monitoring the hardening properties of Controlled Low Strength Material (CLSM) and the characterization of shear waves in CLSM according to curing time. To ensure the early age properties and flow, the CLSM consists of CSA cement, sand, silt, water, fly ash, and accelerator. In addition, three different type specimens according to fine contents are mixed. A couple of bender elements are installed at the wall of measurement cell and the CLSM specimen are prepared at the measurement cell for 28 days. Experimental results show that the resonant frequency and shear wave velocities increase with an increase in the curing time, regardless of the fine contents. Up to ten hours, the amplitudes of shear waves also increase, and the resonant frequency and shear wave velocities at the same time increase as the fine contents increase. The shear wave measurement technique using the bender elements may be effectively used to evaluate the hardening properties of CLSM along the curing time.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.3
• /
• pp.381-391
• /
• 2024

This study examined the factors influencing safety scores in air conditioning installation projects, with a specific focus on the characteristics of safety managers and project-specific details. Given the increase in industrial accidents within this sector and the lack of research on smaller-scale operations, this analysis of 7,046 safety data records from Company A aimed to address this gap. The results indicate that the month of project commencement has the most significant impact on safety scores(correlation coefficient of 0.21), followed by the age of the safety manager(correlation coefficient of 0.06). Interestingly, the educational background of the managers did not appear to influence safety outcomes. Furthermore, project cost was found to have a negative correlation with safety scores(-0.1), suggesting that lower-cost projects may be associated with higher risk levels. These findings underscore the importance of developing tailored safety checklists that take into account the specific timing and scale of air conditioning installation projects. Additionally, the results suggest that incorporating both experienced(older) and less experienced(younger) safety managers into safety strategies may be beneficial for achieving optimal safety outcomes. This balanced approach could leverage the strengths of both groups, potentially enhancing overall risk assessment and mitigation efforts.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.68-79
• /
• 2008

Because local cities are different from large cities, they need to reflect their own characteristics of housing market. Thus in order to obtain useful implications for the establishing sound housing market in Jinju City, this paper investigated the characteristics of spatial distribution and determinant factors that affect apartment price in Jinju City. GIS representation of the apartments showed that most of old and small apartments were built in 'land readjustment project' areas executed in 1970s. On the contrary, new and large scale apartment complexes were built quite recently and distributed in the western and southern parts of the city. Next, in order to examine the factors which affect apartment price, this paper subtracted firstly several variables from the related studies. However in order to avoid multi-colinearity, variables were summarized by means of factor analysis. Then, setting apartment price as a dependant variable, 12 hedonic price models were established with 33 independent variables. As results, building age, floor area, accessibility to university and hospital, accessibility to arterial road, and stair-type building were turned out to be significant. These results will be used in making the supply and allocation plan of urban facilities and housing. Finally as conclusions this paper emphasized the need of periodic analysis of local housing market and establishing detailed housing information systems.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.413-416
• /
• 2008

The concrete used most in construction materials. There is an overcrowded iron dimensions use of the concrete at time of the other concrete theory on the reinforcing rod back which did congestion and compares it with this, and there are more few dimensions of the aggregate than concrete, and quantity of aggregate passage is superior in mortar than concrete. If a volume rate of the aggregate writes mortar than concrete against this, therefore, unit amount increases, and quantity of paste increases and quantity of dry shrinkage than increase concrete. However, I let I regulate lay priest distribution of the aggregate, and the results rates increase and reduce unit amount and decrease quantity of dry shrinkage, and separation resistance and the gap passage characteristics are judged because it can be it in a substitute document of very superior concrete. I came to carry out the study that I watched to let I was useful a little more and do the improvement repair of a become building wall body, a basement pillar and repair reinforcement of the assistant in the reinforcing rod back, the old age when I made congestion here. I regulated lay priest distribution of the aggregate in the study and regulated substitution rate of the aggregate (40%, 50%, 60%) and divided W/C 30%, 40% standards and produced mortar and I compared quantity of air by this, slump, compression robbery and showed it this time.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.3
• /
• pp.279-285
• /
• 2017

In this study, the development of concrete preventing initial frost damage and durability about that were evaluated by using anti-aging agent and admixture(reduced slag). As a result of experiment, initial hydration heat was increased by $C_{12}A_7$ of reduced slag components but it was not effective to development of strength. Also fluidity decreased with increasing replacement of reduced slag. This suggested that fluidity was low by rapid setting due to absent of gypsum in reduced slag components. In case of CR2G specimen that added 4% gypsum, the flow ability was higher than plain. It is considered that concrete developed using reduced slag should use $SO_3$. Result of durability experiments, the durability decreased with increasing replacement amount of reduced slag.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.3
• /
• pp.245-252
• /
• 2017

Recently, structures such as large retailers, outlets and warehouses have been increasing in accordance with changes in consumption patterns. Since these structures include ultra-flat slab members, they are thoroughly managed to control slab cracking by the plastic and drying shrinkage. In order to control the cracking of the slab member, a chemical crack reduction method is used. In particular, the use of the shrinkage reducing agent has been examined. However, domestic research results are limited. In this study, the shrinkage properties of concrete using shrinkage reducing agent and the drying shrinkage properties according to the mixing factors were investigated. The performance of domestic shrinkage reducing agent was appeared similar to that of overseas high-grade shrinkage reducing agent. As the shrinkage reducing agent usage increased, the drying shrinkage reduction effect increased. At the age of 100 days, the dry shrinkage rate of specimen with the shrinkage reducing agent of 1.5%was shown about half that of the specimen without the shrinkage reducing agent. The shrinkage reducing agent was gound to have no specific performance change for the use of the admixture.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.6-19
• /
• 2023

As data management and intelligence capability become proxy indicators of national power, the risk provoked by high depending on digital technology ironically increases. The quicker the changes come to be, the more important digitizing existing data and management of digital data are. The management of archaeological data could not be exceptional. It has to be performed in a more comprehensive, systematic and rapid manner. In order to perform the task, the nature of archaeological data contained in the digital archive should be properly recognized in advance: the primary data are generated by excavation as a process destroying their sources, the data are enormous in type and quantity, including long-term and various human experience, and the natural extinction of primary data in handwritten form is likely to be more crucial than in any other discipline. These characteristics of archaeological data unimaginably devastated the possibility of recovering archives, when we face a digital dark age. Considering both recent trend and the nature of archaeological data mentioned above, we can derive strategies for building a sustainable archaeological digital archive. As an archaeology-major consumer of the digital data, I propose four strategic considerations: ① establishing a system of digital data literacy; ② enhancing evaluation and capability of data reuse; ③ building an international data sharing system; ④ developing it into the platform for digital archaeology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5284-5291
• /
• 2012

This research is to develop the Web-Based Ventilator Management Education Program that reflects the needs of nursing site nursing which is intended to help nursing duties. ISD model-building process has been developed for the analysis, design, development, operation, and evaluation of methods. The education program was developed from April to July 2011, and SPSS 18.0 was used for data analysis. The analysis stage, document review and requirement analysis, content analysis, learner analysis, technology and environment analysis have been executed. Through the processes, higher education requirements for the practical ventilator, a large number of subjects under the age of 30, and the career of less than 3 years of ICU were searched. At the design stage, the education content that was presented by the content expert group was executed in information design, mutual interaction design, synchronization design through discussion with program experts. At the development stage, author made the story flow and gathered data and integrated it through the review of related document and data. At the operation and evaluation stage, author executed the developed program and revised and supplemented it on the basis of the evaluation results through the experts and subjects evaluation. The Web-Based Ventilator Management Education Program could contribute to the improvement of nursing because the program has been developed to reflect the diverse needs of nursing practice in the process of building program.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2016

In this research, it used cement powder and reduction slag, which generates high hydration heat in hydration reaction without heat cure below $-5^{\circ}C$ degree. Purpose of final research is preventing freezing and thawing by making the compressive strength 5MPa in 3days below zero temperature due to own heat of concrete. and it is the result of physical characteristic and thermal property evaluation of reduction slag. Because reduction slag generates high hydration heat, compressive strength development is excellent. By generating highly hydration heat by $C_{12}A_7$ and $C_3A$ in reduction slag, compressive strength is developed in low temperature. In case of displacing only reduction slag without $SO_3$, it is indicated that quick-setting occurs by shortage of $SO_3$. For preventing quick-setting, gypsum is used essentially. According to this research result, in case of using reduction slag and gypsum as a ternary system, compressive strength developed 5MPa in 3 days below zero temperature. It is identified to prevent early frost damage of concrete below zero temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.405-411
• /
• 2016

Given the importance of ensuring continued residency and maintenance of the 1st Planned New Town, which is the first of more than 20 such projects, this study aims to identify the factors determining the residents' living intention. The results show that age, gender, length of stay, and occupancy type are significant factors influencing their living intention. Among the environmental factors, the educational environment and shopping environment are crucial. This means that in order to achieve the "Ageing in Place" concept, it is necessary to improve the educational environment, provide a variety of commercial facilities and expand the living facilities. While it has no direct influence on the pros and cons of building remodeling, the results showed that when the living intention is used as a parameter, the transportation, educational, and shopping environment have an indirect influence on the pros and cons of building remodeling.