• 마이크로전자및패키징학회지
• /
• 제29권1호
• /
• pp.71-75
• /
• 2022

Graphene oxide를 ZnCl₂:NaCl 전해질과 함께 교반한 후 순환 전압전류법에 의해 전기화학적으로 제막하여 유기태양전지용 전자수송층 제막과정을 단순화하고 이를 갖는 유기태양전지를 제작하였다. 소자의 구조는 FTO/ZnO:graphene 전자수송층/P3HT:PCBM 광활성층/PEDOT:PSS 정공수송층/Ag이다. ETL의 형태 및 화학적 특성은 주사전자현미경(scanning electron microscopy, SEM), X선 광전자 분광법(X-ray photoelectron spectroscopy, XPS), 라만 분광법으로 확인하였다. XPS 측정결과 ZnO 금속산화물 및 탄소결합이 동시에 확인되었고, 라만 분광법에서 ZnO와 graphene 피크를 확인하였다. 제작한 태양전지의 전기적 특성을 솔라시뮬레이터로 측정하였고 0.05 V/s의 속도로 2회 제막한 ETL 소자에서 1.94%의 가장 높은 광전변환효율을 나타내었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권1호
• /
• pp.35-40
• /
• 2015

In this study, an n-ZnO/p-Si heterojunction diode with embedded Ag nanoparticles was fabricated to investigate the possible improvement of light trapping via the surface plasmon resonance effect for solar cell applications. The Ag nanoparticles were fabricated by the physical sputtering method. The acquired current-voltage curves and optical absorption spectra demonstrated that the application of Ag nanoparticles in the n-ZnO/p-Si interface increased the photo current, particularly in specific wavelength regions. The results indicate that the enhancement of the photo current was caused by the surface plasmon resonance effect generated by the Ag nanoparticles. In addition, minority carrier lifetime measurements showed that the recombination losses caused by the Ag nanoparticles were negligible. These results suggest that the embedding of Ag nanoparticles is a powerful method to improve the performance of n-ZnO/p-Si heterojunction solar cells.

• 한국전기전자재료학회논문지
• /
• 제26권12호
• /
• pp.858-862
• /
• 2013

The front electrode should be used to make solar cell panel so as to collect electron. The front electrode is used by paste type, printed on the Si-solar cell wafer and sintered at about $800^{\circ}C$. The paste is composed Ag powder and glass frit which make the ohmic contact between Ag electrode and n-type semiconductor layer. From the previous study, the Ag electrodes which used two commercial glass frit of Bi-system were so different on the interface resistance. The main composition of them was Bi-Zn-B-Si-O and few additives added in one of them. In this study, glass frit was made with the ratio of $Bi_2O_3$ and ZnO on the main composition, and then paste using glass frit was prepared respectively. And, also, the paste using the glass frit added oxide additives were prepared. The change of interface resistance was not large with the ratio of $Bi_2O_3$ and ZnO. In the case of G6 glass frit, 78 wt% $Bi_2O_3$ addition, the interface resistance was $190{\Omega}$ and most low. In the glass frit added oxide, the case of Ca increased over 10 times than it of G6 glass frit on the interface resistance. It was thaught that after sintering, Ca added glass frit was not flowed to the interface between Ag electrode and wafer but was in the Ag electrode.

• 한국재료학회지
• /
• 제20권10호
• /
• pp.501-507
• /
• 2010

Changes in surface morphology and roughness of dc sputtered ZnO:Al/Ag back reflectors by varying the deposition temperature and their influence on the performance of flexible silicon thin film solar cells were systematically investigated. By increasing the deposition temperature from $25^{\circ}C$ to $500^{\circ}C$, the grain size of Ag thin films increased from 100 nm to 1000 nm and the grain size distribution became irregular, which resulted in an increment of surface roughness from 6.6 nm to 46.6 nm. Even after the 100 nm thick ZnO:Al film deposition, the surface morphology and roughness of the ZnO:Al/Ag double structured back reflectors were the same as those of the Ag layers, meaning that the ZnO:Al films were deposited conformally on the Ag films without unnecessary changes in the surfacefeatures. The diffused reflectance of the back reflectors improved significantly with the increasing grain size and surface roughness of the Ag films, and in particular, an enhanced diffused reflectance in the long wavelength over 800 nm was observed in the Ag back reflectors deposited at $500^{\circ}C$, which had an irregular grain size distribution of 200-1000 nm and large surface roughness. The improved light scattering properties on the rough ZnO:Al/Ag back reflector surfaces led to an increase of light trapping in the solar cells, and this resulted in a noticeable improvement in the $J_{sc}$ values from 9.94 mA/$cm^2$ for the flat Ag back reflector at $25^{\circ}C$ to 13.36 mA/$cm^2$ for the rough one at $500^{\circ}C$. A conversion efficiency of 7.60% ($V_{oc}$ = 0.93, $J_{sc}$ = 13.36 mA/$cm^2$, FF = 61%) was achieved in the flexible silicon thin film solar cells at this moment.

• 공업화학
• /
• 제27권5호
• /
• pp.512-515
• /
• 2016

새로운 viologen 유도체인 1,1'-bis(3,4-dihydroxybutyl)-[4,4'-bipyridine]-1,1'-diium bromide (V-Pr-2OH)을 합성하여 PTB7 : $PC_{71}BM$ Blend를 기반으로 하는 inverted polymer solar cells (iPSCs)에 cathode buffer layer로 적용하였다. V-Pr-2OH이 cathode buffer layer로 적용된 PSCs (ITO/V-Pr-2OH/PTB7 : $PC_{71}BM/MoO_3/Ag$)의 power conversion efficiency (PCE)는 7.28%이었다. V-Pr-2OH이 없는 iPSCs (ITO/ZnO/PTB7 : $PC_{71}BM/MoO_3/Ag$)의 PCE (7.41%)에 상응하는 값이다. 그러므로 본 연구에서는 높은 열처리 공정이 필요한 ZnO가 배제된, 즉 높은 온도의 열처리 없이도 제작 가능한 PSC에 대한 가능성을 보여주고 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.336.2-336.2
• /
• 2014

Indium Tin Oxide (ITO) thin films are used as the Transparent Conducting Oxide (TCO), such as flat panel display, transparent electrodes, solar cell, touch screen, and various optical devices. ZnO has attracted attention as alternative materials to ITO film due to its resource availability, low cost, and good transmittance at the visible region. Recently, very thin film deposition is important. In order to minimize the damage caused by bending. However, ZnO thin film such as Ga-doped ZnO(GZO) has poor sheet resistance characteristics. To solve this problem, By adding the conductive metal on films can decrease the sheet resistance and increase the mobility of the films. In this study, We analyzed the electrical and optical characteristics of GZO/Ag/GZO (GAG) films by change in Ag and GZO thickness.

• 한국환경보건학회지
• /
• 제41권1호
• /
• pp.17-23
• /
• 2015

Objectives: The cytotoxcities of Au, Ag, SWCNT, $SiO_2$, and ZnO nanomaterials were evaluated in order to assess their potential toxicological effects in in vitro cell models using colony forming efficiency (CFE) assay. Methods: The CFE assay of the test materials was carried out on Hep G2 cells. The size distribution of nanomaterials was studied by transmission electron microscopy (TEM). Changes in cell viability after treatment with a toxicant will result in a decreased number of colonies formed in comparison to solvent. Results: The TEM images show that all the particles except SWCNT and ZnO can be considered approximately spherical. The gold and $SiO_2$ nanoparticles show no response (no toxicity) in concentration response experiments. A statistically significant toxic effect was found in Hep G2 cells treated with Ag, SWCNT and ZnO nanomaterials. Conclusion: In this study, we considered CFE assay to be a promising test for screening studies for cytotoxicity with physicochemical analysis.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.307-316
• /
• 2014

Improved power conversion efficiency of hybrid solar cells with ITO/ZnO seed layer/ZnO NRs/ZnS QDs/P3HT/PCBM/Ag structure was obtained by optimizing the growth period of ZnO nanorods (NRs). ZnO NRs were grown using a hydrothermal method on ZnO seed layers, while ZnS quantum dots (QDs) (average thickness about 24 nm) were fabricated on the ZnO NRs by the successive ionic layer adsorption and reaction (SILAR) technique. Morphology, crystalline structure and optical absorption of layers were analyzed by a scanning electron microscope (SEM), X-ray diffraction (XRD) and UV-Visible absorption spectra, respectively. The XRD results implied that ZnS QDs were in the cubic phase (sphalerite). Other experimental results showed that the maximum power conversion efficiency of 4.09% was obtained for a device based on ZnO NR10 under an illumination of one Sun (AM 1.5G, $100mW/cm^2$).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.317-317
• /
• 2010

ZnO나노와이어는 높은 투과도, 화학 및 열적 안정성을 가지며, 유기태양전지에 적용하였을 때 Active Layer의 표면적 증가, 전자의 수집 및 전달에 용이한 장점가지고 있어 하이브리드 유기 태양전지에 적용되고 있다. ZnO나노와이어와 P3HT/PCBM을 사용한 하이브리드 유기태양전지는 Active Layer의 열처리 온도를 변화시켜 ITO/AZO/ZnO wire/PCBM:P3HT/PEDOT:PSS/Ag구조로 제작되었다. ZnO나노와이어는 AZO를 Seed로 사용하고 Znc nitrate hydrate와 hexamethylenetetramine을 혼합하여 수열합성법으로 성장 후, P3HT:PCBM, PEDOT:PSS을 Spin Coating법으로 형성하였다. UV-vis와 Solar simulator를 통하여 Active Layer의 열처리 온도에 따른 태양전지의 특성을 분석하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.124.2-124.2
• /
• 2011

현재 박막형 태양전지는 실리콘계가 주류를 이루고 있으며, 유리기판 또는 유연성 기판에 비정질 실리콘 박막을 형성시킨 태양전지와 실리콘 기판 양면에 태양전지를 형성하는 방법 등 효율을 극대화시킨 이종접합 태양전지 등이 연구되고 있다. 예컨대 밴드갭이 서로 다른 박막들 간의 이종접합을 이용한 tandem 구조 및 triple 구조의 Si 박막 태양전지의 경우 13%대 변환효율을 나타낸다고 보고된 바 있다. 본 연구에서는 비정질 Si 박막 태양전지 내 흡수층의 효율을 최대화하기 위하여 AZO/Ag 이중구조 박막의 특성에 관한 연구를 수행하고자 한다. combinatorial sputtering system을 이용하여 AZO/Ag 이중구조 박막을 제작하였으며 타겟으로는 4-inch target(Ag, 2wt% Al2O3 doped ZnO)이 사용되었다. 유리기판 상에 combinatorial sputter system으로 상온에서 제작된 Ag 박막의 두께는 25nm로 성장시켰으며 연속공정으로 AZO 박막을 제작하였고, AZO 박막은 100~500nm의 두께경사를 나타내었다. 이 때 유리기판상에 성장된 Ag/AZO 박막의 면저항은 약 $2{\Omega}/{\Box}$ 값을 나타내었다. 본 발표에서는 AZO/Ag 이중 구조 박막의 우수한 전기적 특성을 기반으로 표면 거칠기 및 반사도 특성 등에 관하여 추가적으로 토론한다.