• 한국재료학회지
• /
• 제9권10호
• /
• pp.962-969
• /
• 1999

Ag-Cu-Ti 삽입금속을 이용하여 제조된 AlN/Cu와 AlN/W 활성금속브레이징 접합체의 잔류응력을 유한요소법으로 탄성 및 탄소성 해석을 행하여 그 결과를 접합강도 측정 결과와 파단 거동 관찰 결과와 비교, 분석하였다. 최대 잔류 주응력의 크기는 AlN/W 접합체보다 모재간 열팽창계수 차이가 큰 AlN/Cu 접합체에서 더 크게 나타났으며, 접합계면에 인접한 AlN 세라믹스 자유표면에 인장 성분의 응력집중이 확인되었다. 모재와 삽입금속의 탄소성 변형을 모두 고려할 경우, AlN/Cu 접합체의 경우 연질의 삽입금속에 의해 최대 잔류 주응력이 감소하여 소성변형에 의한 응력완화 효과가 있음을 확인하였으나, 100$\mu\textrm{m}$ 이상으로 삽입금속 두께를 증가시키더라도 잔류 주응력의 크기는 더 이상 크게 감소하지 않았다. 측정된 최대 접합강도는 AlN/Cu와 AlN/W 접합체에서 각각 52 MPa와 108 MPa이었으며, 파단 형태는 AlN/Cu 접합체는 AlN 자유표면으로부터 AlN 내부로 큰 각도를 이루면 진행되는 돔형의 파단이, AlN/W 접합체에서는 접합계면의 삽입금속층을 따라 AlN 측에서 파단이 일어나는 형태를 보였다.

• 마이크로전자및패키징학회지
• /
• 제16권1호
• /
• pp.33-38
• /
• 2009

전자 기기 제품들이 소형화 및 휴대화 되면서 낙하충격 신뢰성에 대한 관심이 높아지고 있다. 본 연구에서는 대표적인 무연솔더인 Sn-3.0Ag-0.5Cu 솔더를 이용하여 ENIG (Electroless Nickel Iimmersion Gold), OSP (Organic Solderability Preservative) 표면 처리와 등온 시효 시험 (High Temperature Storage test)에 따른 보드 레벨 패키지 (board level package)의 낙하충격 신뢰성 (drop reliability) 시험을 수행하였다. 또한 충격 조건을 변화시켜 시편에 가해지는 가속도 (G:acceleration)와 충격 지속 시간 (pulse duration)에 따른 신뢰성을 평가하였다. 기판의 strain측정 결과 중앙 부위가 가장 응력이 컸으며, 충격가속도에 비례하여 응력이 증가하였다. 시효 처리 전에는 OSP처리된 기판이 다소 우수한 신뢰성을 보였지만, 시효 처리후에는 ENIG기판에서 신뢰성이 우수하였고, 반대로 OSP는 감소하는 경향을 보였다. OSP의 경우 과도한 금속간화합물 (intermetallic compound)의 성장으로 인해 접합 계면에서 취성파괴 (brittle fracture)가 일어난 것을 관찰할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1061-1070
• /
• 2023

Over the last few years, lead-free inorganic metal perovskites have gained impressive ground in empowering satellites in space exploration owing to their material stability and performance evolution under extreme space environments. The present work has examined the versatility of eight such perovskites as space radiation shielding materials by computing their photon, charged particles and neutron interaction parameters. Photon interaction parameters were calculated for a wide energy range using PAGEX software. The ranges of heavy charged particles (H, He, C, N, O, Ne, Mg, Si and Fe ions) in these perovskites were estimated using SRIM software in the energy range 1 keV-10 GeV, and that of electrons was computed using ESTAR NIST software in the energy range 0.01 MeV-1 GeV. Further, the macroscopic fast neutron removal cross-sections were also calculated to estimate the neutron shielding efficiencies. The examined shielding parameters of the perovskites varied depending on the radiation type and energy. Among the selected perovskites, Cs₂TiI₆ and Ba₂AgIO₆ displayed superior photon attenuation properties. A 3.5 cm thick Ba₂AgIO₆-based shield could reduce the incident radiation intensity to half its initial value, a thickness even lesser than that of Pb-glass. Besides, CsSnBr₃ and La_0.8Ca_0.2Ni_0.5Ti_0.5O₃ displayed the highest and lowest range values, respectively, for all heavy charged particles. Ba₂AgIO₆ showed electron stopping power (on par with Kovar) better than that of other examined materials. Interestingly, La_0.8Ca_0.2Ni_0.5Ti_0.5O₃ demonstrated neutron removal cross-section values greater than that of standard neutron shielding materials - aluminium and polyethylene. On the whole, the present study not only demonstrates the employment prospects of eco-friendly perovskites for shielding space radiations but also suggests future prospects for research in this direction.

• Journal of Animal Science and Technology
• /
• 제55권6호
• /
• pp.515-520
• /
• 2013

Pyruvate kinase M2 (PKM2) is a key regulatory enzyme in the glycolytic pathway. It is one of four pyruvate kinase isoenzymes that widely differ in their occurrence according to tissue type. PKM2 is expressed in differentiated tissues, such as fat tissues, lung, as well as normal proliferating cells, embryonic cells, and tumor cells. The objective of this study was to investigate the association of single nucleotide polymorphisms (SNPs) in the PKM2 gene with meat quality traits in Berkshire pigs. We detected a SNP (g.34341 A>G) in the 3'UTR region of the PKM2 gene in 670 Berkshire pigs through DNA sequencing. Three genotypes, AA, AG, and GG, were found for this SNP, but based on an association analysis with meat quality traits, genotype AA was significantly associated with thicker back fat than genotype GG (p=0.027). Therefore, the g.34341 A>G polymorphism in the 3'UTR region of the porcine PKM2 gene could be applied in pig breeding programs to improve back fat thickness.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.249-249
• /
• 2015

Silver films have been of considerable interest for years due to their better performance relative to other metal films for engineering applications. A series of multi-layer silver coatings with different thickness (i.e. 0.3 um to 1.5 um) were prepared on Aluminium substrate containing copper undercoat by direct current (DC) magnetron sputtering method. For the comparative purpose, similar thickness silver coatings were prepared by electrolytic deposition method. Microstructural, morphological, and mechanical characteristics of the silver coatings were evaluated by means of scanning electron microscope (SEM), X-ray diffraction (XRD), Surface roughness test, microhardness test and nano-scratch test. From the results, it has been elucidated that the silver films prepared by DC magnetron sputtering method has superior properties in comparison to the wet coating method. On the other hand, DC magnetron sputtering method is relatively easier, faster, eco-friendly and more productive than the electrolytic deposition method that uses several kinds of hazardous chemicals for bath formulation. Therefore, a New Work Item Proposal (NWIP) for the test methods standardization of DC magnetron sputtered silver coatings has recently been proposed via KATS, Korea and a NP ballot is being progressed within a technical committee "ISO/TC107-metallic and other inorganic coating".

• 한국인터넷방송통신학회논문지
• /
• 제18권6호
• /
• pp.107-112
• /
• 2018

콘포멀 스프레이 코팅으로 형성한 EMI 차단막으로 차폐효과(SE)를 얼마나 개선할 수 있는지 연구하였다. 차단막을 형성하는데 사용한 재료는 도체 분말을 아크릴계 바인더에 혼합한 금속-레진 복합재료이며, 금속분말로는 은(Ag)과 니켈(Ni)을 비교하였다. 재료의 점도는 400 cPs와 100 cPs에서 차폐성능을 비교하였다. 차단막의 두께는, 은의 경우 20 um에서 50 um, 니켈의 경우 60 um에서 120 um로 만들어 비교하였다. 차폐효과의 측정은 동축형 표준 측정기를 이용하여 ASTM D4935 방법으로 수행하였다. 니켈 시료보다 은 시료의 차폐효과가 우수했다. 차폐효과는 차단막 두께와 비례해 증가하지만 35 um 이상에서 더 이상 증가하지 않는다는 사실도 관찰하였다. 가장 차폐효과가 좋은 경우는 35 um 두께 은 시료 차단막으로, 63 dB의 차폐효과가 측정되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1756-1758
• /
• 1999

As new gas sensing material with high cata activity for NO decomposition and for CO oxid $LaFeO_3$ thin films with different thicknesses fabricated by the R.F. magnetron sputtering m on an $Al_2O_3$ substrates with Ag electrodes. The sensing characteristics of the $LaFeO_3$ thin films studied as a function of annealing temperature film thickness. The thin film annealed at showed the highest sensitivity of 110% for CO 60% for NO.

• 한국전기전자재료학회논문지
• /
• 제11권11호
• /
• pp.1014-1021
• /
• 1998

We evaluated the effect of processing variables on microstructural evolution interface irregularity between Ag sheath and superconductor core and resultant critical current density(J$_{c}$) of (Bi,Pb)$_2$Sr$_2$Ca$_2$Cu$_3$O$_{x}$(2223) superconductor tape. The value of J$_{c}$ was significantly influenced by the interface irregularity, degree of texturing and relative 2223 content. The interface became more irregular(sausage effect), while the degree of texturing gradually improved as the dimension of tape decreased during forming process. As the dimension of wire/tape were changed from diameter of 3.25 mm to thickness of 0.20 mm, J$_{c}$ value was observed to be increased by 10 times. In addition, optimum sintering temperature for improved J$_{c}$ was observed to be 835$^{\circ}C$ in a ambient atmosphere probably due to combined effect of both improved texturing and high 2223 content. Microstructural investigation showed the degree of texturing was degraded by the existence of both second phases and interface irregularity. It was observed that larger grain size and better texturing was developed near relatively flat interface compared to those inside superconducting core.ting core.

• 전자공학회논문지 IE
• /
• 제44권2호
• /
• pp.21-25
• /
• 2007

본 논문에서는 표면저항을 이용한 차폐성능 및 다층박막의 광학설계 후, roll- to-roll DC 스퍼터링 공정을 이용하여 PET(Polyethylene terephtalate) 필름위에 투명 전도성 산화물 박막인 ITO와 금속을 다층박막 구조(Multilayer)로 균질하게 증착한 전파차폐필름을 1m 넓이로 제작하고 광투과 및 전파차폐특성을 조사하였다. 각 층의 면저항 및 두께에 따라서 전자파 차폐성능과 광투과도를 최적화 할 수 있도록 설계되었고, 그 조건에 따라 필름을 제작하였다. 제작된 전파차폐필름은 2-18GHz 대역에서 99.5%의 차폐성능을 나타내었으며, 400-700 nm에서의 전광선 투과율은 83.1%로 우수한 시인성과 전파차폐특성을 보유하였다.

• 한국재료학회지
• /
• 제11권11호
• /
• pp.941-946
• /
• 2001

Conductive microspheres with a density of 0.2 g/cc were fabricated by electroless silver plating for application to the light-weighted microwave absorbers. The silver plating was conducted with the variation of plating conditions (sensitizing condition, $AgNO_3$, concentration, amount of reducing agent). Specimens have very low electro-resistivity. Under an optimum processing condition, conductive microspheres with uniform silver plating layer can be produced. Rubber-sphere composites were fabricated and their microwave absorbing properties were measured by HP8722D Network Analyzer. It was found that the lower the electrical resistance of microsphere, the better the microwave absorbing properties. Feasibility of microwave absorbers using this microspheres can be demonstrated with the result of microwave reflection loss of -15 dB and thickness of 1.44 mm.