• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1349-1355
• /
• 2014

A three-dimensional (3D) $Co_3O_4$/mildly oxidized multiwalled carbon nanotubes (moCNTs)/reduced mildly oxidized graphene oxide (rmGO) ternary composite was prepared via a simple and green hydrolysishydrothermal approach by mixing $Co(Ac)_2{\cdot}4H_2O$ with moCNTs and mGO suspension in mixed ethanol/$H_2O$. As characterized by scanning electron microscopy and transmission electron microscopy, $Co_3O_4$ nanoparticles with size of 20-100 nm and moCNTs are effectively anchored in mGO. Cyclic voltammetry and galvanostatic charge-discharge measurements were adopted to investigate the electrochemical properties of $Co_3O_4$/moCNTs/rmGO ternary composite in 6 M KOH solution. In a potential window of 0-0.6 V vs. Hg/HgO, the composite delivers an initial specific capacitance of 492 $Fg^{-1}$ at 0.5 $Ag^{-1}$ and the capacitance remains 592 $Fg^{-1}$ after 2000 cycles, while the pure $Co_3O_4$ shows obviously capacitance fading, indicating that rmGO and moCNTs greatly enhance the electrochemical performance of $Co_3O_4$.

• The Korean Journal of Applied Statistics
• /
• v.29 no.7
• /
• pp.1311-1327
• /
• 2016

We propose a multi-state model for analyzing semi-competing risks data with interval-censored or missing intermediate events. This model is an extension of the 'illness-death model', which composes three states, such as 'healthy', 'diseased', and 'dead'. The state of 'diseased' can be considered as an intermediate event. Two more states are added into the illness-death model to describe missing events caused by a loss of follow-up before the end of the study. One of them is a state of 'LTF', representing a lost-to-follow-up, and the other is an unobservable state that represents the intermediate event experienced after LTF occurred. Given covariates, we employ the Cox proportional hazards model with a normal frailty and construct a full likelihood to estimate transition intensities between states in the multi-state model. Marginalization of the full likelihood is completed using the adaptive Gaussian quadrature, and the optimal solution of the regression parameters is achieved through the iterative Newton-Raphson algorithm. Simulation studies are carried out to investigate the finite-sample performance of the proposed estimation procedure in terms of the empirical coverage probability of the true regression parameter. Our proposed method is also illustrated with the dataset adapted from Helmer et al. (2001).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.62-65
• /
• 1995

CdTe crystals were grown by the vertical Bridgman method. P-type DcTe crystals were grown with Cd:Te= 1:1.001 wt. % ratio, while n-type CdTe crystals were 1:1 Also, CdTe:In crystals were investigated, Lattic constants were 6.489${\AA}$ for p-type 6.480${\AA}$for n=type and 6.483${\AA}$ for CdTe:In EPD was 10$\^$-3/-10$\^$4/cm$\^$-2/ for n-, p-type CdTd, 10$\^$4/-10$\^$5/cm$\^$-2 for Cd:Te:In using by E-Ag solution for (111) plane The carrier concentration, the resistivity and the Hall carrier mobility measured by the van der Pauw method were p=5.78${\times}$10$\^$15/cm$\^$-3/, $\rho$=20.2$\Omega$cm, ${\mu}$$\sub$p/=75.6cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for p-typem n=2.98${\times}$10$\^$16/cm$\^$-3/, $\rho$=0.214$\Omega$cm, ${\mu}$$\sub$p/=978.9cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for n-type and n=7.45${\times}$10$\^$16/cm$\^$-3/, $\rho$=1.54 ${\times}$10$\^$3/$\Omega$cm, ${\mu}$$\sub$p/=658.4 cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for CdTe:In crystals, Transmittance of p-type CdTe was 61% that of n-type was 65%, Cd:Te:In showed 60% IR transmittance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.22 no.1
• /
• pp.95-108
• /
• 1984

Even though the tarnishing and corrosion problems characteristic with dental silver-palladium alloy are not yet fully solved, it is recently widely used because of its low cost. However the effects of major alloying elements on the various properties of this system are not fully understood. The object of this research is to clarify the effects of In and Zn additives on the corrosion and tarnishing resistances and precipitation hardening behavior of this sytem, using electrodynamic polarization, immersion, and Vicker's microhardness test and X-ray diffraction and electron probe micro analysis methods. The obtained results were as follows: I. As indium content is increased, both the corrosion resistance in Cl-solution and microhardness are also increased while the tarnishing resistance is decreased. 2. As Zinc content is increased, the corrosion resistance is decreased, but tarnishing resistance is increased 3. At 70Ag-25Pd-2.5Zn-2.5In composition, the precipitation harding behavior was mot significant. The optimum aging temperature was $450^{\circ}C$ and the time was 2 hrs. The resulting specimen of this work carried 180VHN. 4. Under the heat treatment, the changes in the mechanical property are due to the changes in the shape and composition of dendrite matrix, namely, it is because of the precipitation hardening behavior which has been proved by electron probe micro analysis and optical microscopic finding.

• Economic and Environmental Geology
• /
• v.31 no.4
• /
• pp.277-290
• /
• 1998

The purpose of this research is to investigate the dispersion pattern of gold during skarnization and genesis of gold mineralization in the Sangdong skarn deposits. The Sangdong scheelite orebodies are embedded in the Cambrian Pungchon Limestone and limestone interbedded in the Myobong Slate of the Cambrian age. The tungsten deposits are classified as the Hangingwall Orebody, the Main Orebody and the Footwall Orebody as their stratigraphic locations. Recently, the Sangdong granite of the Cretaceous age (85 Ma) were found by underground exploratory drillings below the orebodies. In geochemisty, the W, Mo, Bi and F concentrations in the granite are significantly higher than those in the Cretaceous granitoids in southern Korea. Highest gold contents are associated with quartz-hornblende skarn in the Main Orebody and pyroxene-hornblende skarn in the Hangingwall Orebody. Also Au contents are closely related to Bi contents. This could be inferred that Au skarns formed from solutions under reduced environment at a temperature of $270^{\circ}C$. According to the multiple regression analysis, the variation of Au contents in the Main Orebody can be explained (87.5%) by Ag, As, Bi, Sb, Pb, Cu. Judging from the mineralogical, chemical and isotope studies, the genetic model of the deposits can be suggested as follows. The primitive Sangdong magma was enriched in W, Mo, Au, Bi and volatiles (metal-carriers such as $H_2O$, $CO_2$ and F). During the upward movement of hydrothermal ore solution, the temperature was decreased, and W deposits were formed at limestone (in the Myobong Slate and Pungchon Limestone). In addition, meteoric water influx gave rise to the retrogressive alterations and maximum solubility of gold, and consequently higher grade of Au mineralization was deposited.

• Current Photovoltaic Research
• /
• v.4 no.2
• /
• pp.54-58
• /
• 2016

Laser-doped selective emitter process requires dopant source deposition, spin-on-glass, and is able to form selective emitter through SiNx layer by laser irradiation on desired locations. However, after laser doping process, the remaining dopant layer needs to be washed out. Laser-induced melting of pre-deposited impurity doping is a precise selective doping method minimizing addition of process steps. In this study, we introduce a novel scheme for fabricating highly efficient selective emitter solar cell by laser doping. During this process, laser induced damage induces front contact destabilization due to the hindrance of silver nucleation even though laser doping has a potential of commercialization with simple process concept. When the laser induced damage is effectively removed using solution etch back process, the disadvantage of laser doping was effectively removed. The devices fabricated using laser doping scheme power conversion efficiency was significantly improved about 1% abs. after removal the laser damages.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3223-3228
• /
• 2011

To quantify the presence of mercuric ions in aqueous solution, double-stranded DNA (dsDNA) of poly(dT) was employed using a light switch compound, $Ru(phen)_2(dppz)^{2+}$ (1) which is reported to intercalate into dsDNA of a right-handed B-form. Addition of mercuric ions induced the dehybridization of poly(dT)${\cdot}$poly(dA) duplexes to form a hairpin structure of poly(dT) at room temperature and the metal-to-ligand charge transfer emission derived from the intercalation of 1 was reduced due to the dehybridization of dsDNA. As the concentration of $Hg^{2+}$ was increased, the emission of 1 progressively decreased. This label-free emission method had a detection limit of 0.2 nM. Other metal ions, such as $K^+$, $Ag^+$, $Ca^{2+}$, $Mg^{2+}$, $Zn^{2+}$, $Mn^{2+}$, $Co^{2+}$, $Ni^{2+}$, $Cu^{2+}$, $Cd^{2+}$, $Cr^{3+}$, $Fe^{3+}$, had no significant effect on reducing emission. This emission method can differentiate matched and mismatched poly(dT) sequences based on the emission intensity of dsDNA.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.5
• /
• pp.259-264
• /
• 2020

PURPOSE. The aim of this study was to investigate and compare the color stability of provisional restorative materials fabricated by 3D printing, dental milling, and conventional materials. MATERIALS AND METHODS. For the experimental groups, two commercially available 3D-printing provisional resins (E-Dent 100; EnvisionTEC GmbH, Germany & VeroGlaze™; Stratasys^®, USA), two dental milling blocks (PMMA Disk; Yamahachi Dental Co., Japan & Telio^®CAD; Ivoclar Vivadent AG, Liechtenstein), and two conventional materials (Alike™; GC Co., Japan & Luxatemp automix plus; DMG, Germany) were used. The water sorption and solubility test were (n=10, respectively) carried out according to ISO4049:2000 (International Standards Organization, Geneva, Switzerland). For the color stability test (n=10), coffee and black tea were used as staining solutions, and the specimens were stored for 12 weeks. Data were analyzed by one-way ANOVA and Tukey's HSD using SPSS version 22.0 (SPSS Inc. Chicago, IL, USA) (P<.05). RESULTS. Alike and Veroglaze showed the highest values and Luxatemp showed the lowest water sorption. In the color stability test, the ΔE of conventional materials varied depending on the staining solution. PMMA milling blocks showed a relatively low ΔE up to 4 weeks, and then significantly increased after 8 weeks (P<.05). 3D-printed materials exhibited a high ΔE or a significant increase over time (P<.05). CONCLUSION. The degree of discoloration increased with time, and a visually perceptible color difference value (ΔE) was shown regardless of the materials and solutions. PMMA milled and 3D-printed materials showed more rapid change in discoloration after 8 weeks.

• Toxicological Research
• /
• v.27 no.2
• /
• pp.125-131
• /
• 2011

Through the present study, we produced a monoclonal antibody against aflatoxin B1 (AFB1) using AFB1-carboxymethoxylamine BSA conjugates. One clone showing high binding ability was selected and it was applied to develop a direct competitive ELISA system. The epitope densities of AFB1-CMO against BSA and KLH were about 1 : 6 and 1 : 545, respectively. The monoclonal antibody (mAb) from cloned hybridoma cell was the IgG1 subclass with ${\lambda}$-type light chains. The $IC_{50}s$ of the monoclonal antibody developed for AFB1, AFB2, AFG1 and AFG2 were 4.36, 7.22, 6.61 and 29.41 ng/ml, respectively, based on the AFB1-KLH coated ELISA system and 15.28, 26.62, 32.75 and 56.67 ng/ml, respectively, based on the mAb coated ELISA. Cross-relativities of mAb to AFB1 for AFB2, AFG1 and AFG2 were 60.47, 65.97 and 14.83% in the AFB1-KLH coated ELISA, and 59.41, 46.66 and 26.97% in the mAb coated ELISA, respectively. Quantitative calculations for AFB1 from the AFB1-Ab ELISA and AFB1-Ag ELISA ranged from 0.25 to 25 ng/ml ($R^2$ > 0.99) and from 1 to 100 ng/ml ($R^2$ > 0.99), respectively. The intra- and inter-assay precision CVs were < 10% in both ELISA assay, representing good reproducibility of developed assay. Recoveries ranged from 79.18 to 91.27%, CVs ranged from 3.21 to 7.97% after spiking AFB1 at concentrations ranging from 5 to 50 ng/ml and following by extraction with 70% methanol solution in the Ab-coated ELISA. In conclusion, we produced a group specific mAb against aflatoxins and developed two direct competitive ELISAs for the detection of AFB1 in feeds based on a monoclonal antibody developed.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.152.1-152.1
• /
• 2011

We report preliminary results of long-slit near-infrared (NIR) spectroscopy of Luminous Blue Variables (LBVs) with moderate resolution of R ~ 2400. We obtained Jshort (1.04-1.26 micron) and Ks (2.02-2.31 micron) band spectra of 4 LBVs and 3 LBV candidates in Southern hemisphere using IRIS2, infrared imager and spectrograph, mounted on the 4-m Anglo-Australian Telescope. All targets are fairly bright in NIR so that we can obtain high signal-to-noise ratio for clear line detection and modeling. They are also widely distributed in the HR diagram so that we can compare the spectral properties of LBVs in different temperature and luminosity ranges. Among them, we present the results of two well-known LBVs AG Car and HR Car. Their spectra show similar properties with hydrogen, He I, and metallic lines such as Fe II and Mg II, most of them in emission. We discuss, in particular, the He I 1.083 micron lines formed in stellar wind because these two LBVs show large variation in their He I line intensities, compared to previous studies. Since the He I 1.083 line is known to be anticorrelated with the photometric variation of LBVs, strong line intensities with P-Cygni profiles in both stars indicate that they are now near the visual minimum phase. We model the obtained spectra using non-LTE atmosphere code CMFGEN of Hillier (1998) to derive stellar parameters such as wind velocity and mass loss rate, and discuss the long-term variability of stellar parameters of these LBVs. deduced from our otometric solution.