• 원예과학기술지
• /
• 제31권4호
• /
• pp.400-406
• /
• 2013

This study was conducted to investigate the growth and flowering of African marigold (Tagetes erecta L.) and salvia (Salvia splendens F. Sello ex Ruem & Schult.) seedlings before and after storage under fluorescent lamps and green LED radiation conditions with different light intensities during storage. The both seedlings were kept under a storage room controlled at $8^{\circ}C$ air temperature and $40{\pm}10%$ relative humidity conditions. Light intensities were maintained at 15 and $30{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ during storage. In lighting treatments, dry weight of African marigold at 28 days after storage was not significantly different, and decreased approximately 29% compared to pre-storage under dark treatment. There was no significant difference in the leaf area of salvia seedlings stored under dark condition compared to before storage, but the leaf area under green light radiation with higher light intensity (treatment GH) was two times greater than before storage. The survival rate after transplanting of African marigold stored under dark condition was 10%, and days to flowering increased compared to those stored under fluorescent and green light with higher light intensity (treatment FLH, GH). Comparing to before storage, growth and flowering of the both seedlings after storage were significantly promoted by the light exposure during storage. The present experimental results show that the light intensity should be decided to maintain minimum growth during lighting storage and storage quality of the seedlings such as flowering promotion and extended blooming period after lighting treatment during storage period from the above results.

• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.286-290
• /
• 2007

Biocompatible Hydroxy apatite (HAp) coatings on metallic substrate by plasma spray techniques have been developed. Long-term credibility of plasma spray HAp coatings has been evaluated in physiological saline by electrochemical measurements. It was found that the corrosion resisitance of SUS316L based HAp/Ti conbined coatings was excellent even after more than 10 weeks long-term immersion. It was shown that postal heat treatment improved both the crystallinity and corrosion resistance of HAp. By lowering cooling rate during heat treatment process, less cracks produced in HAp coating layer, which lead to higher credibility of HAp during immersion in physiological saline. The ICP results showed that the dissolution level of substrate metallic ions was low and HAp coatings produced in this research can be acceptable as biocompatible materials. Also, the concentration of dissolved ions from HAp coatings with postal heat treatment was lower compared to those from samples without postal heat treatment. The adherence of HAp coatings with Ti substrate and other mechanical properties were also assessed by three-point bending test. The poor adhesion of HAp coating to titanium substrate can be improved by introducing a plasma spray titanium intermediate layer.

• 한국식품영양학회지
• /
• 제29권5호
• /
• pp.753-759
• /
• 2016

노계육의 물리적 처리를 통한 조직감 개선과 가공특성을 조사하였다. 각 처리 조건은 스팀(Steam, S) $85^{\circ}C$/20 min, 펄스 전기 자기장(Pulsed Electric Field, PEF) 1.5 KV/cm, 초고압 증기 가열법(Super Heated Steam, SHS) 오븐온도($300^{\circ}C$), 스팀 온도($350^{\circ}C$), 시간(8 min)을 선정하여 실험 하였다. 수율에서는 육계육과 노계육 모두 대조구에서 66.85%, 63.80%로 높은 결과를 얻었으며 처리구에서는 모두 감소하여 노계육을 전기장 처리한(PEF) 처리구에서 61.05%로 가장 낮은 수율을 나타냈다(p<0.05). 색도는 노계와 육계의 품종과 관계없이 가열 중 L 값은 낮아지고 a 값과 b 값은 높아지는 전형적인 현상을 보였으며, 가열 감량은 가열 감량은 노계육스팀처리(S)에서 45.25%로 가장 높았으며, 육계육의 초고압증기(B-SH) 가열 처리할 때는 30.66%로 가장 낮았다. 처리구별로는 노계육을 PEF 및 SH 병행 처리 시 PEF와 SH를 단독으로 처리한 물리적인 처리구보다 가열 감량이 낮게 나타나는 것을 알 수 있었다. 조직감은 hardness의 경우 시료별로는 부드러운 조직감을 갖는 육계육에서 초고압스팀처리구(B-SH)에서 5.57 kg으로 가장 낮았다(p<0.05). 반면에 노계육은 PEF 처리한 후 스팀처리구 경우 14.08 kg으로 육계육에 비해서는 질긴 조직감을 보였으나 PEF 처리 후 초고압증기처리(SL-PSH) 시료에서는 10.73 kg까지 유의적으로 감소하여 연도개선에 효과가 있었다. 관능평가에서는 전반적 기호도가 가장 좋은 점수를 보인 것은 육계육 7.8점이었고, 노계육에서는 PEF 처리 후 초고압증기 처리구(SL-PSH)에서 6.3점으로 가장 좋은 점수를 보였다. 따라서 노계육의 연도를 개선하기 위한 물리적 방법에서는 PEF 처리 후 초고압증기처리(PSH)가 가장 이상적인 방법이라고 생각된다.

• 한국재료학회지
• /
• 제30권9호
• /
• pp.474-479
• /
• 2020

The effect of precipitation and dissolution of Si on the thermal diffusivity in the Al-Si alloy system is reported in this study and solution heat treatment followed by aging treatment is carried out to determine the effects of heat treatment on the thermal characteristics. The solution treatment is performed at 535 ℃ for 4 and 10 h and then the specimens are cooled by rapid quenching. The samples are aged at 300 ℃ for 4 h to precipitate Si solute. The addition of 9 wt% silicon contents makes the thermal diffusivity decrease from 78 to 74 mm/s² in the cases of solid solution treated and quenched samples. After quenching and aging, the Si solute precipitates on the Al matrix and increases the thermal diffusivity compared with that after the quenched state. In particular, the increase of the thermal diffusivity is equal to 10 mm/s² without relation to the Si contents in the Al-Si alloy, which seems to corresponded to solute amount of Si 1 wt% in the Al matrix.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.14-20
• /
• 2009

Atmospheric pressure air plasma was applied for treatment of different kinds of natural bamboo fiber to improve their mechanical properties and surface characteristics, which are suitable for adhesion and dyeing. The tensile strength and Young modulus of bamboo fiber were significantly improved; SEM and AFM study show that the surface of fiber became cleaner and rougher after plasma treatment. Plasma treatment caused the cracking, removing of the protective skin of alkali-untreated fiber and etching to form a cleaner and rougher surface. The dyeability of both groups of bamboo fiber which are used for composite and textile purposes is significantly enhanced after treatment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제13권2호
• /
• pp.64-77
• /
• 1989

In this study, the experiments were carried out for the purpose of establishment of aluminium cementation to steel surface by diffusible heat treatment after making the coated film onto the substrate by arc spray method. Also, the microstructure and mechanical properties of the cementation layer produced by this study were inspected for various heat treatment and spraying conditions. Main results obtained are as follow ; 1. The coating film characteristics which have excellent errosion-resistance, high temperature oxidation-resistance are obtained by aluminium penetration heat treatment after making the sprayed aluminum coating film onto the steel substrate. 2. Aluminium diffusion penetration takes place at higher temperature than 660.deg.C, and the more heat treatment time and the higher heat treatment temperature adopted, the deeper diffusion layer obtained. 3. Insert gas arc spraying using argon gas as the carrier gas higher improvement of mechanical property than that of compressed air environment. 4. The coating film characteristics appeared to be improvement of adhesive property, porosity plugging effect by heat treatment in air environment.

• ETRI Journal
• /
• 제21권3호
• /
• pp.16-21
• /
• 1999

After etching Al-Cu alloy films using SiCl4/Cl_2/He/CHF3 mixed gas plasma, the corrosion phenomenon at the grain boundary of the etched surface and a passivation layer on the etched surface with an SF6 plasma treatment subsequent to the etching were studied. In Al-Cu alloy system, corrosion occurs rapidly on the etched surface by residual chlorine atoms, and it occurs dominantly at the grain boundaries rather than the crystalline surfaces. To prevent corrosion, the SF6 gas plasma treatment subsequent to etching was carried out. The passivation layer is composed of fluorine-related compounds on the etched Al-Cu surface after the SF6 treatment, and it suppresses effectively corrosion on the surface as the SF6 treatment pressure increases. Corrosion could be suppressed successfully with the SF6 treatment at a total pressure of 300 mTorr. To investigate the reason why corrosion could be suppressed with the SF6 treatment, behaviors of chlorine and fluorine were studied by various analysis techniques. It was also found that the residual chlorine incorporated at the grain boundary of the etched surface accelerated corrosion and could not be removed after the SF6 plasma treatment.

• Corrosion Science and Technology
• /
• 제23권2호
• /
• pp.166-178
• /
• 2024

The localized corrosion resistance of UNS N07718 alloy was investigated after solution heat treatment. When the alloy was heat-treated at 1050 ℃ for 2.5 hours, it experienced an increase in average grain diameter, a reduction in grain boundary area, and the dissolution of delta phases along grain boundaries. Additionally, primary metallic nitrides (MN) and metallic carbides (MC), enriched with either Ti or Nb, were identified and exhibited a random distribution within the microstructures. Despite the solution heat treatment, the composition, diameter, and abundance of MNs and MCs remained relatively consistent. The critical pitting temperature (CPT), as determined by the ASTM G48-C immersion test, revealed similar values of 45 ℃ for both treated and untreated alloys. However, a decrease in maximum pit depth and corrosion rate was observed after the solution heat treatment. The microstructural changes that occurred during the heat treatment and their potential implications were discussed to understand the influence of the solution heat treatment.

• 한국응용과학기술학회지
• /
• 제31권2호
• /
• pp.176-182
• /
• 2014

Using alkali treatment solution, neutrality treatment solution and acid treatment solution, the surface corrosion layer of copper plates and bronze plates that have been artificially corroded using HCl, $H_2SO_4$ and $HNO_3$ solutions were removed. In the case of alkali treatment solution, only air oxidation in the form of black tenorite and white cuproous chloride remained without being removed. In the case of using a neutrality treatment solution, a anhydrous type layer of reddish brown cupric chloride remained without being removed, together with this black and white corrosion substance. In the case of using an acid treatment solution, this red corrosion substance also remained, but all of the oxide was removed on the surface of the specimen that was treated by alternatively using alkali treatment solution and acid treatment solution. In the case of this treatment solution with the order of alkali-acid, oxidation no longer proceeded only through the distilled water cleaning process after treatment, thereby showing that oxidation from the cleaning solution no longer proceeded.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.76-81
• /
• 2006

Modem after-treatment technology has been developed variously in order to decrease exhausted emission in diesel engine. However, it seems very difficult to comply with updated stringent emission standards. Specially, it has been many years that exhaust gas from gasoline automobile rather than from diesel is the major object concerned by Korea and other countries, and it is strongly required on the reduction techniques on harmful NOx and PM among those compositions. Thus, this research focused on the electronic control EGR and the target for this research is heavy-duty turbo-diesel engine with EGR technology(High pressure route and low pressure route system).